Samuel Holland <samuel.holland@sifive.com> says:
This series fixes a couple of issues related to using the cbo.zero
instruction in userspace. The first patch fixes a bug where the wrong
enable bit gets set if the kernel is running in M-mode. The remaining
patches fix a bug where the enable bit gets reset to its default value
after a nonretentive idle state. I have hardware which reproduces this:
Before this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
Illegal instruction
After applying this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
ok 2 cbo.zero
ok 3 cbo.zero check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
* b4-shazam-merge:
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
Link: https://lore.kernel.org/r/20240228065559.3434837-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged
ISA (aka S[ms]1p12). However, bits in this CSR are defined by several
other extensions which may be implemented separately from any particular
version of the privileged ISA (for example, some unrelated errata may
prevent an implementation from claiming conformance with Ss1p12). As a
result, Linux cannot simply use the privileged ISA version to determine
if the CSR is present. It must also check if any of these other
extensions are implemented. It also cannot probe the existence of the
CSR at runtime, because Linux does not require Sstrict, so (in the
absence of additional information) it cannot know if a CSR at that
address is [ms]envcfg or part of some non-conforming vendor extension.
Since there are several standard extensions that imply the existence of
the [ms]envcfg CSR, it becomes unwieldy to check for all of them
wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA
extension bit that is implied by the other extensions and denotes that
the CSR exists as defined in the privileged ISA, containing at least one
of the fields common between menvcfg and senvcfg.
This extension does not need to be parsed from the devicetree or ISA
string because it can only be implemented as a subset of some other
standard extension.
Cc: <stable@vger.kernel.org> # v6.7+
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add myself as a maintainer for the various SiFive drivers, since I have
been performing cleanup activity on these drivers and reviewing patches
to them for a while now. Remove Palmer as a maintainer, as he is focused
on overall RISC-V architecture support.
Collapse some duplicate entries into the main SiFive drivers entry:
- Conor is already maintainer of standalone cache drivers as a whole,
and these files are also covered by the "sifive" file name regex.
- Paul's git tree has not been updated since 2018, and all file names
matching the "fu540" pattern also match the "sifive" pattern.
- Green has not been active on the LKML for a couple of years.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20240215234941.1663791-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Before attempting to support the pre-ratification version of vector
found on older T-Head CPUs, disallow "v" in riscv,isa on these
platforms. The deprecated property has no clear way to communicate
the specific version of vector that is supported and much of the vendor
provided software puts "v" in the isa string. riscv,isa-extensions
should be used instead. This should not be too much of a burden for
these systems, as the vendor shipped devicetrees and firmware do not
work with a mainline kernel and will require updating.
We can limit this restriction to only ignore v in riscv,isa on CPUs
that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs
that support the ratified version of vector should report non-zero
marchid, according to Guo Ren [1].
Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1]
Fixes: dc6667a4e7 ("riscv: Extending cpufeature.c to detect V-extension")
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240223-tidings-shabby-607f086cb4d7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The new riscv specific arch_hugetlb_migration_supported() must be
guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid
the following build error:
In file included from include/linux/hugetlb.h:851,
from kernel/fork.c:52:
>> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration
15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported'
916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'}
14 | bool arch_hugetlb_migration_supported(struct hstate *h);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/
Fixes: ce68c03545 ("riscv: Fix arch_hugetlb_migration_supported() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240211083640.756583-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CALLER_ADDRx returns caller's address at specified level, they are used
for several tracers. These macros eventually use
__builtin_return_address(n) to get the caller's address if arch doesn't
define their own implementation.
In RISC-V, __builtin_return_address(n) only works when n == 0, we need
to walk the stack frame to get the caller's address at specified level.
data.level started from 'level + 3' due to the call flow of getting
caller's address in RISC-V implementation. If we don't have additional
three iteration, the level is corresponding to follows:
callsite -> return_address -> arch_stack_walk -> walk_stackframe
| | | |
level 3 level 2 level 1 level 0
Fixes: 10626c32e3 ("riscv/ftrace: Add basic support")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20240202015102.26251-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This single fix is also part of a larger cleanup, so I'm merging it
into my fixes branch so it can be shared with for-next.
* commit '8246601a7d391ce8207408149d65732f28af81a1':
riscv: tlb: fix __p*d_free_tlb()
Nathan Chancellor <nathan@kernel.org> says:
Eric reported that builds of LLVM with [1] (close to tip of tree) have
CONFIG_AS_HAS_OPTION_ARCH=n because the test for expected failure on
invalid input has started succeeding.
This Kconfig test was added because '.option arch' only causes an
assembler warning when it is unsupported, rather than a hard error,
which is what users of as-instr expect when something is unsupported.
This can be resolved by turning assembler warnings into errors with
'-Wa,--fatal-warnings' like we do with the compiler with '-Werror',
which is what the first patch does. The second patch removes the invalid
test, as the valid test is good enough with fatal warnings.
I have diffed several configurations for the different architectures
that use as-instr and I have found no issues.
[1]: 3ac9fe69f7
* b4-shazam-merge:
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-0-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit e4bb020f3d ("riscv: detect assembler support for .option arch")
added two tests, one for a valid value to '.option arch' that should
succeed and one for an invalid value that is expected to fail to make
sure that support for '.option arch' is properly detected because Clang
does not error when '.option arch' is not supported:
$ clang --target=riscv64-linux-gnu -Werror -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: warning: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
0
Unfortunately, the invalid test started being accepted by Clang after
the linked llvm-project change, which causes CONFIG_AS_HAS_OPTION_ARCH
and configurations that depend on it to be silently disabled, even
though those versions do support '.option arch'.
The invalid test can be avoided altogether by using
'-Wa,--fatal-warnings', which will turn all assembler warnings into
errors, like '-Werror' does for the compiler:
$ clang --target=riscv64-linux-gnu -Werror -Wa,--fatal-warnings -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: error: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
1
The as-instr macros have been updated to make use of this flag, so
remove the invalid test, which allows CONFIG_AS_HAS_OPTION_ARCH to work
for all compiler versions.
Cc: stable@vger.kernel.org
Fixes: e4bb020f3d ("riscv: detect assembler support for .option arch")
Link: 3ac9fe69f7
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/r/20240121011341.GA97368@sol.localdomain/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-2-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Certain assembler instruction tests may only induce warnings from the
assembler on an unsupported instruction or option, which causes as-instr
to succeed when it was expected to fail. Some tests workaround this
limitation by additionally testing that invalid input fails as expected.
However, this is fragile if the assembler is changed to accept the
invalid input, as it will cause the instruction/option to be unavailable
like it was unsupported even when it is.
Use '-Wa,--fatal-warnings' in the as-instr macro to turn these warnings
into hard errors, which avoids this fragility and makes tests more
robust and well formed.
Cc: stable@vger.kernel.org
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-1-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c
for use in the entry code, but is not declared anywhere. Add the relevant
declaration to arch/riscv/include/asm/stacktrace.h to silence the following
sparse warning:
arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static?
We don't add the stackinfo_get_overflow() call as for some of the other
architectures as this doesn't seem to be used yet, so just silence the
warning.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: be97d0db5f ("riscv: VMAP_STACK overflow detection thread-safe")
Link: https://lore.kernel.org/r/20231123134214.81481-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
While merging riscv napot and arm64 contpte support, I noticed we did
not abide by the specification which states that we should clear a
napot mapping before setting a new one, called "break before make" in
arm64 (patch 1). And also that we did not add the new hugetlb page size
added by napot in hugetlb_mask_last_page() (patch 2).
* b4-shazam-merge:
riscv: Fix hugetlb_mask_last_page() when NAPOT is enabled
riscv: Fix set_huge_pte_at() for NAPOT mapping
Link: https://lore.kernel.org/r/20240117195741.1926459-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117140333.2479667-1-vincent.chen@sifive.com
Fixes: 7a92fc8b4d ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
