mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-12-27 12:21:22 -05:00
e2a33a2a3258794891cdd6ca4b1318da6594d157
1349678 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kent Overstreet
|
e2a33a2a32 |
lib/sort.c: add _nonatomic() variants with cond_resched()
bcachefs calls sort() during recovery to sort all keys it found in the journal, and this may be very large - gigabytes on large machines. This has been causing "task blocked" warnings, so needs a cond_resched(). [kent.overstreet@linux.dev: fix kerneldoc] Link: https://lkml.kernel.org/r/cgsr5a447pxqomc4gvznsp5yroqmif4omd7o5lsr2swifjhoic@yzjjrx2bvrq7 Link: https://lkml.kernel.org/r/20250326152606.2594920-1-kent.overstreet@linux.dev Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: Kuan-Wei Chiu <visitorckw@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Nicolas Schier
|
c8b6d5dd34 |
mailmap: add an entry for Nicolas Schier
Add mapping to linux.dev address as mail usage at work is limited and my mail provider for private mails is suffering from its own domain name block lists. Link: https://lkml.kernel.org/r/20250326-mailmap-add-entry-for-nicolas-v1-1-3c26579a7fdf@fjasle.eu Signed-off-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
25601e8544 |
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
||
|
Linus Torvalds
|
2cd5769fb0 |
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
||
|
Linus Torvalds
|
d6b02199cd |
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
|
Linus Torvalds
|
eb0ece1602 |
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
08733088b5 |
Merge tag 'rust-fixes-6.15-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fix from Miguel Ojeda: "Fix 'generate_rust_analyzer.py' due to typo during merge" Mea culpa, mea maxima culpa. * tag 'rust-fixes-6.15-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: scripts: generate_rust_analyzer: fix pin-init name in kernel deps |
||
|
Linus Torvalds
|
98fb679d19 |
Merge tag 'bcachefs-2025-03-31' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet: "All bugfixes and logging improvements" * tag 'bcachefs-2025-03-31' of git://evilpiepirate.org/bcachefs: (35 commits) bcachefs: fix bch2_write_point_to_text() units bcachefs: Log original key being moved in data updates bcachefs: BCH_JSET_ENTRY_log_bkey bcachefs: Reorder error messages that include journal debug bcachefs: Don't use designated initializers for disk_accounting_pos bcachefs: Silence errors after emergency shutdown bcachefs: fix units in rebalance_status bcachefs: bch2_ioctl_subvolume_destroy() fixes bcachefs: Clear fs_path_parent on subvolume unlink bcachefs: Change btree_insert_node() assertion to error bcachefs: Better printing of inconsistency errors bcachefs: bch2_count_fsck_err() bcachefs: Better helpers for inconsistency errors bcachefs: Consistent indentation of multiline fsck errors bcachefs: Add an "ignore unknown" option to bch2_parse_mount_opts() bcachefs: bch2_time_stats_init_no_pcpu() bcachefs: Fix bch2_fs_get_tree() error path bcachefs: fix logging in journal_entry_err_msg() bcachefs: add missing newline in bch2_trans_updates_to_text() bcachefs: print_string_as_lines: fix extra newline ... |
||
|
Linus Torvalds
|
4080cf02f1 |
Merge tag 'fs_for_v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, and isofs updates from Jan Kara: - conversion of ext2 to the new mount API - small folio conversion work for ext2 - a fix of an unexpected return value in udf in inode_getblk() - a fix of handling of corrupted directory in isofs * tag 'fs_for_v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix inode_getblk() return value ext2: Make ext2_params_spec static ext2: create ext2_msg_fc for use during parsing ext2: convert to the new mount API ext2: Remove reference to bh->b_page isofs: fix KMSAN uninit-value bug in do_isofs_readdir() |
||
|
Linus Torvalds
|
172f7c9167 |
Merge tag 'exfat-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon: - Fix random stack corruption and incorrect error returns in exfat_get_block() - Optimize exfat_get_block() by improving checking corner cases - Fix an endless loop by self-linked chain in exfat_find_last_cluster - Remove dead EXFAT_CLUSTERS_UNTRACKED codes - Add missing shutdown check - Improve the delete performance with discard mount option * tag 'exfat-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: call bh_read in get_block only when necessary exfat: fix potential wrong error return from get_block exfat: fix missing shutdown check exfat: fix the infinite loop in exfat_find_last_cluster() exfat: fix random stack corruption after get_block exfat: remove count used cluster from exfat_statfs() exfat: support batch discard of clusters when freeing clusters |
||
|
Linus Torvalds
|
f64a72bc76 |
Merge tag 'v6.15rc-part1-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French: - Two fixes for bounds checks of open contexts - Two multichannel fixes, including one for important UAF - Oplock/lease break fix for potential ksmbd connection refcount leak - Security fix to free crypto data more securely - Fix to enable allowing Kerberos authentication by default - Two RDMA/smbdirect fixes - Minor cleanup * tag 'v6.15rc-part1-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix r_count dec/increment mismatch ksmbd: fix multichannel connection failure ksmbd: fix use-after-free in ksmbd_sessions_deregister() ksmbd: use ib_device_get_netdev() instead of calling ops.get_netdev ksmbd: use aead_request_free to match aead_request_alloc Revert "ksmbd: fix missing RDMA-capable flag for IPoIB device in ksmbd_rdma_capable_netdev()" ksmbd: add bounds check for create lease context ksmbd: add bounds check for durable handle context ksmbd: make SMB_SERVER_KERBEROS5 enable by default ksmbd: Use str_read_write() and str_true_false() helpers |
||
|
Linus Torvalds
|
8b175e2e18 |
Merge tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French: - Fix for network namespace refcount leak - Multichannel fix and minor multichannel debug message cleanup - Fix potential null ptr reference in SMB3 close - Fix for special file handling when reparse points not supported by server - Two ACL fixes one for stricter ACE validation, one for incorrect perms requested - Three RFC1001 fixes: one for SMB3 mounts on port 139, one for better default hostname, and one for better session response processing - Minor update to email address for MAINTAINERS file - Allow disabling Unicode for access to old SMB1 servers - Three minor cleanups * tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add new mount option -o nounicode to disable SMB1 UNICODE mode cifs: Set default Netbios RFC1001 server name to hostname in UNC smb: client: Fix netns refcount imbalance causing leaks and use-after-free cifs: add validation check for the fields in smb_aces CIFS: Propagate min offload along with other parameters from primary to secondary channels. cifs: Improve establishing SMB connection with NetBIOS session cifs: Fix establishing NetBIOS session for SMB2+ connection cifs: Fix getting DACL-only xattr system.cifs_acl and system.smb3_acl cifs: Check if server supports reparse points before using them MAINTAINERS: reorder preferred email for Steve French cifs: avoid NULL pointer dereference in dbg call smb: client: Remove redundant check in smb2_is_path_accessible() smb: client: Remove redundant check in cifs_oplock_break() smb: mark the new channel addition log as informational log with cifs_info smb: minor cleanup to remove unused function declaration |
||
|
Linus Torvalds
|
b6dde1e527 |
Merge tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever: "Neil Brown contributed more scalability improvements to NFSD's open file cache, and Jeff Layton contributed a menagerie of repairs to NFSD's NFSv4 callback / backchannel implementation. Mike Snitzer contributed a change to NFS re-export support that disables support for file locking on a re-exported NFSv4 mount. This is because NFSv4 state recovery is currently difficult if not impossible for re-exported NFS mounts. The change aims to prevent data integrity exposures after the re-export server crashes. Work continues on the evolving NFSD netlink administrative API. Many thanks to the contributors, reviewers, testers, and bug reporters who participated during the v6.15 development cycle" * tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits) NFSD: Add a Kconfig setting to enable delegated timestamps sysctl: Fixes nsm_local_state bounds nfsd: use a long for the count in nfsd4_state_shrinker_count() nfsd: remove obsolete comment from nfs4_alloc_stid nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault() nfsd: reorganize struct nfs4_delegation for better packing nfsd: handle errors from rpc_call_async() nfsd: move cb_need_restart flag into cb_flags nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY nfsd: prevent callback tasks running concurrently nfsd: disallow file locking and delegations for NFSv4 reexport nfsd: filecache: drop the list_lru lock during lock gc scans nfsd: filecache: don't repeatedly add/remove files on the lru list nfsd: filecache: introduce NFSD_FILE_RECENT nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc() nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync() NFSD: Re-organize nfsd_file_gc_worker() nfsd: filecache: remove race handling. fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning ... |
||
|
Linus Torvalds
|
1e7857b280 |
x86: don't re-generate cpufeaturemasks.h so eagerly
It turns out the code to generate the x86 cpufeaturemasks.h header was
way too aggressive, and would re-generate it whenever the timestamp on
the kernel config file changed.
Now, the regular 'make *config' tools are fairly careful to not rewrite
the kernel config file unless the contents change, but other usecases
aren't that careful.
Michael Kelley reports that 'make-kpkg' ends up doing "make syncconfig"
multiple times in prepping to build, and will modify the config file in
the process (and then modify it back, but by then the timestamps have
changed).
Jakub Kicinski reports that the netdev CI does something similar in how
it generates the config file in multiple steps.
In both cases, the config file timestamp updates then cause the
cpufeaturemasks.h file to be regenerated, and that in turn then causes
lots of unnecessary rebuilds due to all the normal dependencies.
Fix it by using our 'filechk' infrastructure in the Makefile to generate
the header file. That will only write a new version of the file if the
contents of the file have actually changed.
Fixes:
|
||
|
Linus Torvalds
|
46d29f23a7 |
Merge tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt: - Restructure the persistent memory to have a "scratch" area Instead of hard coding the KASLR offset in the persistent memory by the ring buffer, push that work up to the callers of the persistent memory as they are the ones that need this information. The offsets and such is not important to the ring buffer logic and it should not be part of that. A scratch pad is now created when the caller allocates a ring buffer from persistent memory by stating how much memory it needs to save. - Allow where modules are loaded to be saved in the new scratch pad Save the addresses of modules when they are loaded into the persistent memory scratch pad. - A new module_for_each_mod() helper function was created With the acknowledgement of the module maintainers a new module helper function was created to iterate over all the currently loaded modules. This has a callback to be called for each module. This is needed for when tracing is started in the persistent buffer and the currently loaded modules need to be saved in the scratch area. - Expose the last boot information where the kernel and modules were loaded The last_boot_info file is updated to print out the addresses of where the kernel "_text" location was loaded from a previous boot, as well as where the modules are loaded. If the buffer is recording the current boot, it only prints "# Current" so that it does not expose the KASLR offset of the currently running kernel. - Allow the persistent ring buffer to be released (freed) To have this in production environments, where the kernel command line can not be changed easily, the ring buffer needs to be freed when it is not going to be used. The memory for the buffer will always be allocated at boot up, but if the system isn't going to enable tracing, the memory needs to be freed. Allow it to be freed and added back to the kernel memory pool. - Allow stack traces to print the function names in the persistent buffer Now that the modules are saved in the persistent ring buffer, if the same modules are loaded, the printing of the function names will examine the saved modules. If the module is found in the scratch area and is also loaded, then it will do the offset shift and use kallsyms to display the function name. If the address is not found, it simply displays the address from the previous boot in hex. * tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Use _text and the kernel offset in last_boot_info tracing: Show last module text symbols in the stacktrace ring-buffer: Remove the unused variable bmeta tracing: Skip update_last_data() if cleared and remove active check for save_mod() tracing: Initialize scratch_size to zero to prevent UB tracing: Fix a compilation error without CONFIG_MODULES tracing: Freeable reserved ring buffer mm/memblock: Add reserved memory release function tracing: Update modules to persistent instances when loaded tracing: Show module names and addresses of last boot tracing: Have persistent trace instances save module addresses module: Add module_for_each_mod() function tracing: Have persistent trace instances save KASLR offset ring-buffer: Add ring_buffer_meta_scratch() ring-buffer: Add buffer meta data for persistent ring buffer ring-buffer: Use kaslr address instead of text delta ring-buffer: Fix bytes_dropped calculation issue |
||
|
Linus Torvalds
|
609706855d |
Merge tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing documentation fix from Steven Rostedt: "Documentation fix for runtime verifier The runtime verifier documents that were created were not referenced in the indices, which caused warning when building the documentation tree. Those documents are now added to the rv indices" * tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation/rv: Add sched pages to the indices |
||
|
Linus Torvalds
|
802f0d58d5 |
Merge tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
|
||
|
Andrei Lalaev
|
c1f4534b21 |
scripts: generate_rust_analyzer: fix pin-init name in kernel deps
Because of different crate names ("pin-init" and "pin_init") passed to
"append_crate" and "append_crate_with_generated", the script fails with
"KeyError: 'pin-init'".
To overcome the issue, pass the same name to both functions.
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Link: https://lore.kernel.org/r/AM9PR03MB7074692E5D24C288D2BBC801C8AD2@AM9PR03MB7074.eurprd03.prod.outlook.com
Fixes:
|
||
|
Kent Overstreet
|
650f5353dc |
bcachefs: fix bch2_write_point_to_text() units
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Linus Torvalds
|
4e82c87058 |
Merge tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
|
||
|
Linus Torvalds
|
01d5b167dc |
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu: - Use RCU instead of RCU-sched The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable() in the module code and its users has been replaced with just rcu_read_lock() - The rest of changes are smaller fixes and updates * tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits) MAINTAINERS: Update the MODULE SUPPORT section module: Remove unnecessary size argument when calling strscpy() module: Replace deprecated strncpy() with strscpy() params: Annotate struct module_param_attrs with __counted_by() bug: Use RCU instead RCU-sched to protect module_bug_list. static_call: Use RCU in all users of __module_text_address(). kprobes: Use RCU in all users of __module_text_address(). bpf: Use RCU in all users of __module_text_address(). jump_label: Use RCU in all users of __module_text_address(). jump_label: Use RCU in all users of __module_address(). x86: Use RCU in all users of __module_address(). cfi: Use RCU while invoking __module_address(). powerpc/ftrace: Use RCU in all users of __module_text_address(). LoongArch: ftrace: Use RCU in all users of __module_text_address(). LoongArch/orc: Use RCU in all users of __module_address(). arm64: module: Use RCU in all users of __module_text_address(). ARM: module: Use RCU in all users of __module_text_address(). module: Use RCU in all users of __module_text_address(). module: Use RCU in all users of __module_address(). module: Use RCU in search_module_extables(). ... |
||
|
Linus Torvalds
|
7405c0f01a |
Merge tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes and updates from Ingo Molnar: - Fix a large number of x86 Kconfig dependency and help text accuracy bugs/problems, by Mateusz Jończyk and David Heideberg - Fix a VM_PAT interaction with fork() crash. This also touches core kernel code - Fix an ORC unwinder bug for interrupt entries - Fixes and cleanups - Fix an AMD microcode loader bug that can promote verification failures into success - Add early-printk support for MMIO based UARTs on an x86 board that had no other serial debugging facility and also experienced early boot crashes * tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Fix __apply_microcode_amd()'s return value x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range() x86/fpu: Update the outdated comment above fpstate_init_user() x86/early_printk: Add support for MMIO-based UARTs x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1 x86/Kconfig: Fix lists in X86_EXTENDED_PLATFORM help text x86/Kconfig: Correct X86_X2APIC help text x86/speculation: Remove the extra #ifdef around CALL_NOSPEC x86/Kconfig: Document release year of glibc 2.3.3 x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32 x86/Kconfig: Document CONFIG_PCI_MMCONFIG x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM x86/Kconfig: Move all X86_EXTENDED_PLATFORM options together x86/Kconfig: Always enable ARCH_SPARSEMEM_ENABLE x86/Kconfig: Enable X86_X2APIC by default and improve help text |
||
|
Kent Overstreet
|
7fdc3fa3cb |
bcachefs: Log original key being moved in data updates
There's something going on with the data move path; log the original key being moved for debugging. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
edaed8ee8c |
bcachefs: BCH_JSET_ENTRY_log_bkey
Add a journal entry type for logging - but logging a bkey, not a string; to be used for data move path debugging. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Linus Torvalds
|
b4c5c57c2d |
Merge tag 'locking-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc locking fixes and updates from Ingo Molnar: - Fix a locking self-test FAIL on PREEMPT_RT kernels - Fix nr_unused_locks accounting bug - Simplify the split-lock debugging feature's fast-path * tag 'locking-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Decrease nr_unused_locks if lock unused in zap_class() lockdep: Fix wait context check on softirq for PREEMPT_RT x86/split_lock: Simplify reenabling |
||
|
Linus Torvalds
|
aa918db707 |
Merge tag 'bpf_try_alloc_pages' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf try_alloc_pages() support from Alexei Starovoitov:
"The pull includes work from Sebastian, Vlastimil and myself with a lot
of help from Michal and Shakeel.
This is a first step towards making kmalloc reentrant to get rid of
slab wrappers: bpf_mem_alloc, kretprobe's objpool, etc. These patches
make page allocator safe from any context.
Vlastimil kicked off this effort at LSFMM 2024:
https://lwn.net/Articles/974138/
and we continued at LSFMM 2025:
https://lore.kernel.org/all/CAADnVQKfkGxudNUkcPJgwe3nTZ=xohnRshx9kLZBTmR_E1DFEg@mail.gmail.com/
Why:
SLAB wrappers bind memory to a particular subsystem making it
unavailable to the rest of the kernel. Some BPF maps in production
consume Gbytes of preallocated memory. Top 5 in Meta: 1.5G, 1.2G,
1.1G, 300M, 200M. Once we have kmalloc that works in any context BPF
map preallocation won't be necessary.
How:
Synchronous kmalloc/page alloc stack has multiple stages going from
fast to slow: cmpxchg16 -> slab_alloc -> new_slab -> alloc_pages ->
rmqueue_pcplist -> __rmqueue, where rmqueue_pcplist was already
relying on trylock.
This set changes rmqueue_bulk/rmqueue_buddy to attempt a trylock and
return ENOMEM if alloc_flags & ALLOC_TRYLOCK. It then wraps this
functionality into try_alloc_pages() helper. We make sure that the
logic is sane in PREEMPT_RT.
End result: try_alloc_pages()/free_pages_nolock() are safe to call
from any context.
try_kmalloc() for any context with similar trylock approach will
follow. It will use try_alloc_pages() when slab needs a new page.
Though such try_kmalloc/page_alloc() is an opportunistic allocator,
this design ensures that the probability of successful allocation of
small objects (up to one page in size) is high.
Even before we have try_kmalloc(), we already use try_alloc_pages() in
BPF arena implementation and it's going to be used more extensively in
BPF"
* tag 'bpf_try_alloc_pages' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
mm: Fix the flipped condition in gfpflags_allow_spinning()
bpf: Use try_alloc_pages() to allocate pages for bpf needs.
mm, bpf: Use memcg in try_alloc_pages().
memcg: Use trylock to access memcg stock_lock.
mm, bpf: Introduce free_pages_nolock()
mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation
locking/local_lock: Introduce localtry_lock_t
|
||
|
Kent Overstreet
|
2b47102b93 |
bcachefs: Reorder error messages that include journal debug
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
393a05a741 |
bcachefs: Don't use designated initializers for disk_accounting_pos
Not all compilers fully initialize these - they're not guaranteed to because of the union shenanigans. Fixes: https://github.com/koverstreet/bcachefs/issues/844 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
f548db4d31 |
bcachefs: Silence errors after emergency shutdown
We don't care about errors from asynchronous ops that were because we did an emergency shutdown; silence them. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
458e2ef882 |
bcachefs: fix units in rebalance_status
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
707549600c |
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly pruning the dcache. Also, fix missing permissions checks. Reported-by: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Linus Torvalds
|
494e7fe591 |
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit
|
||
|
Linus Torvalds
|
fa593d0f96 |
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
||
|
Linus Torvalds
|
7f2ff7b626 |
Merge tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar: "Core: - misc rejig of header includes - minor const fixes Misc: - constify amba_id table pcc: - cleanup and refactoring of shmem and irq handling qcom: - add MSM8226 compatible fsl,mu: - add i.MX94 compatible mediatek: - remove cl in struct cmdq_pkt tegra: - define dimensioning masks in SoC data" * tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (25 commits) mailbox: Remove unneeded semicolon mailbox: pcc: Refactor and simplify check_and_ack() mailbox: pcc: Always map the shared memory communication address mailbox: pcc: Refactor error handling in irq handler into separate function mailbox: pcc: Use acpi_os_ioremap() instead of ioremap() mailbox: pcc: Return early if no GAS register from pcc_mbox_cmd_complete_check mailbox: pcc: Drop unnecessary endianness conversion of pcc_hdr.flags mailbox: pcc: Always clear the platform ack interrupt first mailbox: pcc: Fix the possible race in updation of chan_in_use flag dt-bindings: mailbox: qcom: add compatible for MSM8226 SoC dt-bindings: mailbox: fsl,mu: Add i.MX94 compatible MAINTAINERS: add mailbox API's tree type and location mailbox: remove unused header files mailbox: explicitly include <linux/bits.h> mailbox: sort headers alphabetically mailbox: don't protect of_parse_phandle_with_args with con_mutex mailbox: use error ret code of of_parse_phandle_with_args() mailbox: arm_mhuv2: Constify amba_id table mailbox: arm_mhu_db: Constify amba_id table mailbox: arm_mhu: Constify amba_id table ... |
||
|
Linus Torvalds
|
91481c4ad0 |
Merge tag 'hsi-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel: - ssi_protocol: fix potential use after free after module removal * tag 'hsi-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition |
||
|
Linus Torvalds
|
556f1b4874 |
Merge tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - remove unused set_charged infrastructure - drop of_node from power_supply struct Power-supply drivers: - axp717: support devices without thermistors - bq27xxx: support max design voltage for bq270x0 and bq27x10 - pcf50633: drop charger driver - max1720x: add battery health support - switch all power-supply devices from of_node to fwnode - convert regmap users to maple tree register cache - convert drivers to devm_kmemdup_array - misc cleanups and fixes Reset drivers: - at91-sama5d2_shdwc: add sama7d65 support * tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits) power: supply: mt6370: Remove redundant 'flush_workqueue()' calls Revert "power: supply: bq27xxx: do not report bogus zero values" power: supply: max77693: Fix wrong conversion of charge input threshold value power: supply: pcf50633: Remove charger power: supply: all: switch psy_cfg from of_node to fwnode power: supply: core: get rid of of_node power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC power: supply: smb347: convert to use maple tree register cache power: supply: rt9455: convert to use maple tree register cache power: supply: max1720x: convert to use maple tree register cache power: supply: ltc4162l: convert to use maple tree register cache power: supply: bq25980: convert to use maple tree register cache power: supply: bq25890: convert to use maple tree register cache power: supply: bq2515x: convert to use maple tree register cache power: supply: bq24257: convert to use maple tree register cache power: supply: bd99954: convert to use maple tree register cache power: supply: Remove unused set_charged method power: supply: ds2760: Remove unused ds2760_battery_set_charged power: supply: core: Remove unused power_supply_set_battery_charged power: supply: sc27xx: use devm_kmemdup_array() ... |
||
|
Linus Torvalds
|
59c35416f4 |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
|
||
|
Linus Torvalds
|
472863ab2a |
Merge tag 'rproc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson: - Transition the i.MX8MP DSP remoteproc driver to use the reset framework for driving the run/stall reset bits - Add support for managing the modem remoteprocessor on the Qualcomm MSM8226, MSM8926, and SM8750 platforms * tag 'rproc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits) remoteproc: qcom_q6v5_pas: Make single-PD handling more robust remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8226 remoteproc: core: Clear table_sz when rproc_shutdown remoteproc: sysmon: Update qcom_add_sysmon_subdev() comment dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files irqdomain: remoteproc: Switch to of_fwnode_handle() remoteproc: qcom: pas: add minidump_id to SC7280 WPSS remoteproc: imx_dsp_rproc: Document run_stall struct member remoteproc: qcom: pas: Add SM8750 MPSS dt-bindings: remoteproc: Add SM8750 MPSS imx_dsp_rproc: Use reset controller API to control the DSP reset: imx8mp-audiomix: Add support for DSP run/stall reset: imx8mp-audiomix: Introduce active_low configuration option reset: imx8mp-audiomix: Prepare the code for more reset bits reset: imx8mp-audiomix: Add prefix for internal macro dt-bindings: dsp: fsl,dsp: Add resets property dt-bindings: reset: audiomix: Add reset ids for EARC and DSP remoteproc: qcom_wcnss: Handle platforms with only single power domain dt-bindings: remoteproc: qcom,wcnss-pil: Add support for single power-domain platforms remoteproc: qcom_q6v5_mss: Add modem support on MSM8926 ... |
||
|
Linus Torvalds
|
7d4eca7ac5 |
Merge tag 'hwlock-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson: "Drop a few unused functions from the hwspinlock framework" * tag 'hwlock-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: Remove unused hwspin_lock_get_id() hwspinlock: Remove unused (devm_)hwspin_lock_request() |
||
|
Kent Overstreet
|
b3981564ca |
bcachefs: Clear fs_path_parent on subvolume unlink
This fixes recursive subvolume removal. Subvolume deletion is asynchronous; fs_path_parent, and thus the entry in the subvolume_children btree, need to be cleared when the subvolume is unlinked from the fs heirarchy - else we'll spuriously think a subvolume has children and deletion will fail. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Linus Torvalds
|
29d9983b2c |
Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
|
||
|
Linus Torvalds
|
93d5228867 |
Merge tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Apple DWI Backlight:
- Added devicetree bindings for backlight controllers on Apple's DWI
interface.
- Added a new driver (apple_dwi_bl) for these controllers found on
some Apple mobile devices.
- Added MAINTAINERS entries for the new driver.
- led_bl: Fixed a locking issue by holding the led_access lock when
calling led_sysfs_disable() during device removal to prevent
potential warnings.
- Removed unnecessary <linux/fb.h> includes from a bunch of drivers.
- tdo24m: Removed redundant whitespace in Kconfig description.
- pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD
and s3c24xx platform support were removed.
* tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits)
backlight: pcf50633-backlight: Remove unused driver
backlight: tdo24m: Eliminate redundant whitespace
MAINTAINERS: Add entries for Apple DWI backlight controller
backlight: apple_dwi_bl: Add Apple DWI backlight driver
dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight
backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
backlight: wm831x_bl: Do not include <linux/fb.h>
backlight: vgg2432a4: Do not include <linux/fb.h>
backlight: tps65217_bl: Do not include <linux/fb.h>
backlight: max8925_bl: Do not include <linux/fb.h>
backlight: lv5207lp: Do not include <linux/fb.h>
backlight: locomolcd: Do not include <linux/fb.h>
backlight: hp680_bl: Do not include <linux/fb.h>
backlight: ep93xx_bl: Do not include <linux/fb.h>
backlight: da9052_bl: Do not include <linux/fb.h>
backlight: da903x_bl: Do not include <linux/fb.h>
backlight: bd6107_bl: Do not include <linux/fb.h>
backlight: as3711_bl: Do not include <linux/fb.h>
backlight: adp8870_bl: Do not include <linux/fb.h>
backlight: adp8860_bl: Do not include <linux/fb.h>
...
|
||
|
Linus Torvalds
|
cb9b4c3403 |
Merge tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones: - pca955x: Add HW blink support, utilizing PWM0. It supports one frequency across all blinking LEDs and falls back to software blink if different frequencies are requested. - trigger: netdev: Allow configuring LED blink interval via .blink_set even when HW offload (.hw_control) is enabled. - led-core: Fix a race condition where a quick LED_OFF followed by another brightness set could leave the LED off incorrectly, especially noticeable after the introduction of the ordered workqueue. - qcom-lpg: Add support for 6-bit PWM resolution alongside the existing 9-bit support. - qcom-lpg: Fix PWM value capping to respect the selected resolution (6-bit or 9-bit) for normal PWMs. - qcom-lpg: Fix PWM value capping to respect the selected resolution for Hi-Res PWMs. - qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to prevent requested duty cycles from exceeding the maximum allowed by the selected resolution. - st1202: Add a check for the error code returned by devm_mutex_init(). - pwm-multicolor: Add a check for the return value of fwnode_property_read_u32(). - st1202: Ensure hardware initialization (st1202_setup) happens before DT node processing (st1202_dt_init). - Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's required by the driver. - lp8860: Drop unneeded explicit assignment to REGCACHE_NONE. - pca955x: Refactor code with helper functions and rename some functions/variables for clarity. - pca955x: Pass driver data pointers instead of the I2C client to helper functions. - pca955x: Optimize probe LED selection logic to reduce I2C operations. - pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to pca955x_num_led_regs) as it's needed for HW blink support. - st1202: Refactor st1202_led_set() to use the !! operator for boolean conversion. - st1202: Minor spacing and proofreading edits in comments. - Directory Rename: Rename the drivers/leds/simple directory to drivers/leds/simatic as the drivers within are not simple. - mlxcpld: Remove unused include of acpi.h. - nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use mod_devicetable.h, remove explicit driver_data initializer). - tlc591xx: Convert text binding to YAML format, add child node constraints, and fix typos/formatting in the example. - qcom-lpg: Document the qcom,pm8937-pwm compatible string as a fallback for qcom,pm8916-pwm. * tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits) leds: nic78bx: Tidy up ACPI ID table leds: mlxcpld: Remove unused ACPI header inclusion leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs leds: Rename simple directory to simatic leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN leds: leds-st1202: Spacing and proofreading editing leds: leds-st1202: Initialize hardware before DT node child operations leds: pwm-multicolor: Add check for fwnode_property_read_u32 leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution leds: Fix LED_OFF brightness race Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()" leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible leds: pca955x: Add HW blink support leds: pca955x: Optimize probe LED selection leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Refactor with helper functions and renaming dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format ... |
||
|
Linus Torvalds
|
dcab75a3c8 |
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
|
||
|
Linus Torvalds
|
054b7477e3 |
Merge tag 'regmap-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown: "Only a couple of small patches this release, one refactoring struct regmap to pack it more efficiently and another which makes our way of setting all bits consistent in the regmap-irq code" * tag 'regmap-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: irq: Use one way of setting all bits in the register regmap: Reorder 'struct regmap' |
||
|
Linus Torvalds
|
883ab4e47c |
Merge tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller: - drop parisc specific memcpy_fromio() function - clean up coding style and fix compile warnings * tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: led: Use scnprintf() to avoid string truncation warning Input: gscps2 - Describe missing function parameters parisc: perf: use named initializers for struct miscdevice parisc: PDT: Fix missing prototype warning parisc: Remove memcpy_fromio parisc: Fix formatting errors in io.c |
||
|
Linus Torvalds
|
1c83601b8f |
Merge tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - Add support for multi-cluster configuration - Add quirks for enabling multi-cluster mode on EyeQ6 - Add DTS clocks for ralink - Cleanup realtek DTS - Other cleanups and fixes * tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits) MIPS: config: omega2+, vocore2: enable CLK_MTMIPS arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX MIPS: cm: Fix warning if MIPS_CM is disabled MIPS: Fix Macro name MIPS: ds1287: Match ds1287_set_base_clock() function types MIPS: cevt-ds1287: Add missing ds1287.h include MIPS: dec: Declare which_prom() as static MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy() mips: dts: ralink: mt7628a: update system controller node and its consumers mips: dts: ralink: mt7620a: update system controller node and its consumers mips: dts: ralink: rt3883: update system controller node and its consumers mips: dts: ralink: rt3050: update system controller node and its consumers mips: dts: ralink: rt2880: update system controller node and its consumers dt-bindings: clock: add clock definitions for Ralink SoCs MIPS: Use arch specific syscall name match function mips: dts: realtek: Add restart to Cisco SG220-26P mips: dts: realtek: Add RTL838x SoC peripherals mips: dts: realtek: Replace uart clock property mips: dts: realtek: Correct uart interrupt-parent mips: dts: realtek: Add SoC IRQ node for RTL838x ... |
||
|
Linus Torvalds
|
f90f2145b2 |
Merge tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik: - Add sorting of mcount locations at build time - Rework uaccess functions with C exception handling to shorten inline assembly size and enable full inlining. This yields near-optimal code for small constant copies with a ~40kb kernel size increase - Add support for a configurable STRICT_MM_TYPECHECKS which allows to generate better code, but also allows to have type checking for debug builds - Optimize get_lowcore() for common callers with alternatives that nearly revert to the pre-relocated lowcore code, while also slightly reducing syscall entry and exit time - Convert MACHINE_HAS_* checks for single facility tests into cpu_has_* style macros that call test_facility(), and for features with additional conditions, add a new ALT_TYPE_FEATURE alternative to provide a static branch via alternative patching. Also, move machine feature detection to the decompressor for early patching and add debugging functionality to easily show which alternatives are patched - Add exception table support to early boot / startup code to get rid of the open coded exception handling - Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE to ensure correct inlining and unrolling decisions - Remove 2k page table leftovers now that s390 has been switched to always allocate 4k page tables - Split kfence pool into 4k mappings in arch_kfence_init_pool() and remove the architecture-specific kfence_split_mapping() - Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence spurious KASAN warnings from opportunistic ftrace argument tracing - Force __atomic_add_const() variants on s390 to always return void, ensuring compile errors for improper usage - Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched semantics and lack of known users, relying on asm-generic fallbacks - Signal eventfd in vfio-ap to notify userspace when the guest AP configuration changes, including during mdev removal - Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap drivers to avoid fake flex array confusion - Cleanup trap code - Remove references to the outdated linux390@de.ibm.com address - Other various small fixes and improvements all over the code * tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits) s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool() s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth() s390/boot: Ignore vmlinux.map s390/sysctl: Remove "vm/allocate_pgste" sysctl s390: Remove 2k vs 4k page table leftovers s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste() s390/lowcore: Use lghi instead llilh to clear register s390/syscall: Merge __do_syscall() and do_syscall() s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly s390/smp: Implement raw_smp_processor_id() with inline assembly s390/current: Implement current with inline assembly s390/lowcore: Use inline qualifier for get_lowcore() inline assembly s390: Move s390 sysctls into their own file under arch/s390 s390/syscall: Simplify syscall_get_arguments() s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed s390: Remove ioremap_wt() and pgprot_writethrough() s390/mm: Add configurable STRICT_MM_TYPECHECKS s390/mm: Convert pgste_val() into function s390/mm: Convert pgprot_val() into function ... |
||
|
Linus Torvalds
|
1fa753c7b5 |
Merge tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel: - Decouple mixed mode startup code from the traditional x86 decompressor - Revert zero-length file hack in efivarfs - Prevent EFI zboot from using the CopyMem/SetMem boot services after ExitBootServices() - Update EFI zboot to use the ZLIB/ZSTD library interfaces directly * tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/libstub: Avoid legacy decompressor zlib/zstd wrappers efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices efi: efibc: change kmalloc(size * count, ...) to kmalloc_array() efivarfs: Revert "allow creation of zero length files" x86/efi/mixed: Move mixed mode startup code into libstub x86/efi/mixed: Simplify and document thunking logic x86/efi/mixed: Remove dependency on legacy startup_32 code x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub x86/efi/mixed: Factor out and clean up long mode entry x86/efi/mixed: Check CPU compatibility without relying on verify_cpu() x86/efistub: Merge PE and handover entrypoints |
||
|
Kent Overstreet
|
63c3b8f616 |
bcachefs: Change btree_insert_node() assertion to error
Debug for https://github.com/koverstreet/bcachefs/issues/843 Print useful debug info and go emergency read-only. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |