Create a selftest that exercises the race between page faults and
madvise(MADV_DONTNEED) in the same huge page. Do it by running two
threads that touches the huge page and madvise(MADV_DONTNEED) at the same
time.
In case of a SIGBUS coming at pagefault, the test should fail, since we
hit the bug.
The test doesn't have a signal handler, and if it fails, it fails like
the following
----------------------------------
running ./hugetlb_fault_after_madv
----------------------------------
./run_vmtests.sh: line 186: 595563 Bus error (core dumped) "$@"
[FAIL]
This selftest goes together with the fix of the bug[1] itself.
[1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r
Link: https://lkml.kernel.org/r/20231005163922.87568-3-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Rik van Riel <riel@surriel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "various improvements to the GUP interface", v2.
A series of fixes to simplify and improve the GUP interface with an eye to
providing groundwork to future improvements:-
* __access_remote_vm() and access_remote_vm() are functionally identical,
so make the former static such that in future we can potentially change
the external-facing implementation details of this function.
* Extend is_valid_gup_args() to cover the missing FOLL_TOUCH case, and
simplify things by defining INTERNAL_GUP_FLAGS to check against.
* Adjust __get_user_pages_locked() to explicitly treat a failure to pin any
pages as an error in all circumstances other than FOLL_NOWAIT being
specified, bringing it in line with the nommu implementation of this
function.
* (With many thanks to Arnd who suggested this in the first instance)
Update get_user_page_vma_remote() to explicitly only return a page or an
error, simplifying the interface and avoiding the questionable
IS_ERR_OR_NULL() pattern.
This patch (of 4):
access_remote_vm() passes through parameters to __access_remote_vm()
directly, so remove the __access_remote_vm() function from mm.h and use
access_remote_vm() in the one caller that needs it (ptrace_access_vm()).
This allows future adjustments to the GUP-internal __access_remote_vm()
function while keeping the access_remote_vm() function stable.
Link: https://lkml.kernel.org/r/cover.1696288092.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/f7877c5039ce1c202a514a8aeeefc5cdd5e32d19.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()".
Convert page_move_anon_rmap() to folio_move_anon_rmap(), letting the
callers handle PageAnonExclusive. I'm including cleanup patch #3 because
it fits into the picture and can be done cleaner by the conversion.
This patch (of 3):
Let's move it into the caller: there is a difference between whether an
anon folio can only be mapped by one process (e.g., into one VMA), and
whether it is truly exclusive (e.g., no references -- including GUP --
from other processes).
Further, for large folios the page might not actually be pointing at the
head page of the folio, so it better be handled in the caller. This is a
preparation for converting page_move_anon_rmap() to consume a folio.
Link: https://lkml.kernel.org/r/20231002142949.235104-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231002142949.235104-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are many implementations of ->fault and some of them depend on
mmap_lock being held. All vm_ops that implement ->map_pages() end up
calling filemap_fault(), which I have audited to be sure it does not rely
on mmap_lock. So (for now) key off ->map_pages existing as a flag to
indicate that it's safe to call ->fault while only holding the vma lock.
Link: https://lkml.kernel.org/r/20231006195318.4087158-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is usually safe to call wp_page_copy() under the VMA lock. The only
unsafe situation is when no anon_vma has been allocated for this VMA, and
we have to look at adjacent VMAs to determine if their anon_vma can be
shared. Since this happens only for the first COW of a page in this VMA,
the majority of calls to wp_page_copy() do not need to fall back to the
mmap_sem.
Add vmf_anon_prepare() as an alternative to anon_vma_prepare() which will
return RETRY if we currently hold the VMA lock and need to allocate an
anon_vma. This lets us drop the check in do_wp_page().
Link: https://lkml.kernel.org/r/20231006195318.4087158-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Handle more faults under the VMA lock", v2.
At this point, we're handling the majority of file-backed page faults
under the VMA lock, using the ->map_pages entry point. This patch set
attempts to expand that for the following siutations:
- We have to do a read. This could be because we've hit the point in
the readahead window where we need to kick off the next readahead,
or because the page is simply not present in cache.
- We're handling a write fault. Most applications don't do I/O by writes
to shared mmaps for very good reasons, but some do, and it'd be nice
to not make that slow unnecessarily.
- We're doing a COW of a private mapping (both PTE already present
and PTE not-present). These are two different codepaths and I handle
both of them in this patch set.
There is no support in this patch set for drivers to mark themselves as
being VMA lock friendly; they could implement the ->map_pages
vm_operation, but if they do, they would be the first. This is probably
something we want to change at some point in the future, and I've marked
where to make that change in the code.
There is very little performance change in the benchmarks we've run;
mostly because the vast majority of page faults are handled through the
other paths. I still think this patch series is useful for workloads that
may take these paths more often, and just for cleaning up the fault path
in general (it's now clearer why we have to retry in these cases).
This patch (of 6):
Drop the VMA lock instead of the mmap_lock if that's the one which
is held.
Link: https://lkml.kernel.org/r/20231006195318.4087158-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231006195318.4087158-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Percpu counter's compare and add are separate functions: without locking
around them (which would defeat their purpose), it has been possible to
overflow the intended limit. Imagine all the other CPUs fallocating tmpfs
huge pages to the limit, in between this CPU's compare and its add.
I have not seen reports of that happening; but tmpfs's recent addition of
dquot_alloc_block_nodirty() in between the compare and the add makes it
even more likely, and I'd be uncomfortable to leave it unfixed.
Introduce percpu_counter_limited_add(fbc, limit, amount) to prevent it.
I believe this implementation is correct, and slightly more efficient than
the combination of compare and add (taking the lock once rather than twice
when nearing full - the last 128MiB of a tmpfs volume on a machine with
128 CPUs and 4KiB pages); but it does beg for a better design - when
nearing full, there is no new batching, but the costly percpu counter sum
across CPUs still has to be done, while locked.
Follow __percpu_counter_sum()'s example, including cpu_dying_mask as well
as cpu_online_mask: but shouldn't __percpu_counter_compare() and
__percpu_counter_limited_add() then be adding a num_dying_cpus() to
num_online_cpus(), when they calculate the maximum which could be held
across CPUs? But the times when it matters would be vanishingly rare.
Link: https://lkml.kernel.org/r/bb817848-2d19-bcc8-39ca-ea179af0f0b4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There has been a recurring problem, that when a tmpfs volume is being
filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or
EFAULT) even though all allocations were within the permitted size.
This was a problem since early days, but magnified and complicated by the
addition of huge pages. We have often worked around it by adding some
slop to the tmpfs size, but it's hard to say how much is needed, and some
users prefer not to do that e.g. keeping sparse files in a tightly
tailored tmpfs helps to prevent accidental writing to holes.
This comes from the allocation sequence:
1. check page cache for existing folio
2. check and reserve from vm_enough_memory
3. check and account from size of tmpfs
4. if huge, check page cache for overlapping folio
5. allocate physical folio, huge or small
6. check and charge from mem cgroup limit
7. add to page cache (but maybe another folio already got in).
Concurrent tasks allocating at the same position could deplete the size
allowance and fail. Doing vm_enough_memory and size checks before the
folio allocation was intentional (to limit the load on the page allocator
from this source) and still has some virtue; but memory cgroup never did
that, so I think it's better reordered to favour predictable behaviour.
1. check page cache for existing folio
2. if huge, check page cache for overlapping folio
3. allocate physical folio, huge or small
4. check and charge from mem cgroup limit
5. add to page cache (but maybe another folio already got in)
6. check and reserve from vm_enough_memory
7. check and account from size of tmpfs.
The folio lock held from allocation onwards ensures that the !uptodate
folio cannot be used by others, and can safely be deleted from the cache
if checks 6 or 7 subsequently fail (and those waiting on folio lock
already check that the folio was not truncated once they get the lock);
and the early addition to page cache ensures that racers find it before
they try to duplicate the accounting.
Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying,
which can be combined inside the new shmem_alloc_and_add_folio(): doing 2
splits twice (once huge, once nonhuge) is not exactly equivalent to trying
5 splits (and giving up early on huge), but let's keep it simple unless
more complication proves necessary.
Userfaultfd is a foreign country: they do things differently there, and
for good reason - to avoid mmap_lock deadlock. Leave ordering in
shmem_mfill_atomic_pte() untouched for now, but I would rather like to
mesh it better with shmem_get_folio_gfp() in the future.
Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract shmem's memcg charging out of shmem_add_to_page_cache(): it's
misleading done there, because many calls are dealing with a swapcache
page, whose memcg is nowadays always remembered while swapped out, then
the charge re-levied when it's brought back into swapcache.
Temporarily move it back up to the shmem_get_folio_gfp() level, where the
memcg was charged before v5.8; but the next commit goes on to move it back
down to a new home.
In making this change, it becomes clear that shmem_swapin_folio() does not
need to know the vma, just the fault mm (if any): call it fault_mm rather
than charge_mm - let mem_cgroup_charge() decide whom to charge.
Link: https://lkml.kernel.org/r/4b2143c5-bf32-64f0-841-81a81158dac@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The existing comments in filemap_fault() suggest that, after either a
minor fault has occurred and filemap_get_folio() found a folio in the page
cache, or a major fault arose and __filemap_get_folio(FGP_CREATE...) did
the job (having relied on do_sync_mmap_readahead() or filemap_read_folio()
to read in the folio), the only possible reason it could not be uptodate
is because of an error.
This is not so, as if, for instance, the fault occurred within a VMA which
had the VM_RAND_READ flag set (via madvise() with the MADV_RANDOM flag
specified), this would cause even synchronous readahead to fail to read in
the folio.
I confirmed this by dropping page caches and faulting in memory
madvise()'d this way, observing that this code path was reached on each
occasion.
Clarify the comments to include this case, and additionally update the
comment recently added around the invalidate lock logic to make it clear
the comment explicitly refers to the minor fault case.
In addition, while we're here, refer to folios rather than pages.
[lstoakes@gmail.com: correct identation as per Christopher's feedback]
Link: https://lkml.kernel.org/r/2c7014c0-6343-4e76-8697-3f84f54350bd@lucifer.local
Link: https://lkml.kernel.org/r/20230930231029.88196-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
