Allow mlxreg-io platform driver activation for the next generation
systems, in particular for MQM87xx, MSN34xx, MSN37xx types, which have:
- extended reset causes bits related to ComEx reset, voltage devices
firmware upgrade, system platform reset;
- additional CPLD device;
- JTAG select capability;
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Exchange LED configuration between msn201x and next generation systems
types.
Bug was introduced when LED driver activation was added to mlx-platform.
LED configuration for the three new system MQMB7, MSN37, MSN34 was
assigned to MSN21 and vice versa. This bug affects MSN21 only and
likely requires backport to v4.19.
Fixes: 1189456b1c ("platform/x86: mlx-platform: Add LED platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Shift by one the registers for tachometers (7 - 12).
This fix is relevant for the same new systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
This fix is necessary, because register used before for tachometer 7
has been than reserved for the second PWM for newer systems, which are
not supported yet in mlx-platform driver. So registers of tachometers
7-12 have been shifted by one.
Fixes: 0378123c58 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Rename product names for next generation systems QMB7, SN37, SN34 to
respectively MQMB7, MSN37, MSN34.
All these systems are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
The names have been changed due to marketing decision.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add definitions for new registers:
- CPLD3 version - next generation systems are equipped with three CPLD;
- Two reset cause registers, which store the system reset reason (like
system failures, upgrade failures and so on;
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
- Use generic quirks macros for fan quirks
The fan-specific quirks macros were duplicates of the generic ones.
- Remove useless #undef lines
The referenced macros are not defined anywhere.
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.
To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.
This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
At ->remove() stage we know that device had been instantiated properly,
so, it can't be an invalid pointer to the driver data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As Greg KH explained in:
https://lkml.org/lkml/2015/8/15/114
There no need to check the return value of debugfs_create_file() and
debugfs_create_dir().
This also fix static code checker warnings:
drivers/platform/x86/intel_ips.c:1314
ips_debugfs_init() warn: passing zero to 'PTR_ERR'
drivers/platform/x86/intel_ips.c:1328
ips_debugfs_init() warn: passing zero to 'PTR_ERR'
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If ACPI table provides an Interrupt() resource we may consider to use it
instead of GpioInt() one.
Here we leave an error condition, when getting IRQ resource, to the driver
to decide how to proceed, because some drivers may consider IRQ resource
optional.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of relying on hard coded and thus expected number of I2C clients,
count the real amount provided by firmware.
This allows to support non-fixed amount of the slaves.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now, when i2c_acpi_new_device() never returns NULL, there is no point to check
for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and
caller doesn't need to guess is better.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now, when i2c_acpi_new_device() never returns NULL, there is no point to check
for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and
caller doesn't need to guess is better.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The caller would like to know the reason why the i2c_acpi_new_device() fails.
For example, if adapter is not available, it might be in the future and we
would like to re-probe the clients again. But at the same time we would like to
bail out if the error seems unrecoverable, such as invalid argument supplied.
To achieve this, return error pointer in some cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some Lenovo IdeaPad models lack a physical rfkill switch.
On Lenovo models Yoga 2 13, ideapad-laptop would wrongly report all
radios as blocked by hardware which caused wireless network connections
to fail.
Add these models without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: Loic WEI YU NENG <loic.wyn@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This adds support to show the Latency Tolerance Reporting for the IPs on
the PCH as reported by the PMC. The format shown here is raw LTR data
payload that can further be decoded as per the PCI specification.
This also fixes some minor alignment issues in the header file by
removing spaces and converting to tabs at some places.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.
The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.
The key that matches this behavior the closest is KEY_SCREENLOCK.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.
Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.
Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Name (_WDG, Buffer (0x28)
{
/* 0000 */ 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
/* 0008 */ 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
/* 0010 */ 0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
/* 0018 */ 0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
/* 0020 */ 0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
})
Method (WMNB, 3, Serialized)
{
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
Local0 = (Arg1 & 0xFFFFFFFF)
(...)
If ((Local0 == 0x53564544))
{
(...)
If ((IIA0 == 0x00050011))
{
If ((IIA1 == 0x02))
{
^^PCI0.SBRG.EC0.SPIN (0x72, One)
^^PCI0.SBRG.EC0.BLCT = One
}
Return (One)
}
}
(...)
}
(...)
}
(...)
}
(...)
Scope (_SB.PCI0.SBRG.EC0)
{
(...)
Name (BLCT, Zero)
(...)
Method (_Q10, 0, NotSerialized) // _Qxx: EC Query
{
If ((BLCT == Zero))
{
Local0 = One
Local0 = RPIN (0x72)
Local0 ^= One
SPIN (0x72, Local0)
If (ATKP)
{
Local0 = (0x34 - Local0)
^^^^ATKD.IANE (Local0)
}
}
ElseIf ((BLCT == One))
{
If (ATKP)
{
^^^^ATKD.IANE (0x35)
}
}
}
(...)
}
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The keycode KEY_FAVORITES(0x16c) used in thinkpad_acpi driver is too
big (out of range > 255) for xorg to handle.
xkeyboard-config has already mapped KEY_BOOKMARKS(156) to
XF86Favorites:
keycodes/evdev:
<I164> = 164; // #define KEY_BOOKMARKS 156
symbols/inet:
key <I164> { [ XF86Favorites ] };
So change the keymap to KEY_BOOKMARKS for Favorites hotkey.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull UBIFS updates from Richard Weinberger:
- Full filesystem authentication feature, UBIFS is now able to have the
whole filesystem structure authenticated plus user data encrypted and
authenticated.
- Minor cleanups
* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
ubifs: Remove unneeded semicolon
Documentation: ubifs: Add authentication whitepaper
ubifs: Enable authentication support
ubifs: Do not update inode size in-place in authenticated mode
ubifs: Add hashes and HMACs to default filesystem
ubifs: authentication: Authenticate super block node
ubifs: Create hash for default LPT
ubfis: authentication: Authenticate master node
ubifs: authentication: Authenticate LPT
ubifs: Authenticate replayed journal
ubifs: Add auth nodes to garbage collector journal head
ubifs: Add authentication nodes to journal
ubifs: authentication: Add hashes to index nodes
ubifs: Add hashes to the tree node cache
ubifs: Create functions to embed a HMAC in a node
ubifs: Add helper functions for authentication support
ubifs: Add separate functions to init/crc a node
ubifs: Format changes for authentication support
ubifs: Store read superblock node
ubifs: Drop write_node
...
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfix:
- Fix build issues on architectures that don't provide 64-bit cmpxchg
Cleanups:
- Fix a spelling mistake"
* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: fix spelling mistake, EACCESS -> EACCES
SUNRPC: Use atomic(64)_t for seq_send(64)
Pull more timer updates from Thomas Gleixner:
"A set of commits for the new C-SKY architecture timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: gx6605s SOC timer
clocksource/drivers/c-sky: Add gx6605s SOC system timer
dt-bindings: timer: C-SKY Multi-processor timer
clocksource/drivers/c-sky: Add C-SKY SMP timer
Pull NTB updates from Jon Mason:
"Fairly minor changes and bug fixes:
NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of
private struct, and a few bug fixes"
* tag 'ntb-4.20' of git://github.com/jonmason/ntb:
ntb: idt: Alter the driver info comments
ntb: idt: Discard temperature sensor IRQ handler
ntb: idt: Add basic hwmon sysfs interface
ntb: idt: Alter temperature read method
ntb_netdev: Simplify remove with client device drvdata
NTB: transport: Try harder to alloc an aligned MW buffer
ntb: ntb_transport: Mark expected switch fall-throughs
ntb: idt: Set PCIe bus address to BARLIMITx
NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
ntb: intel: fix return value for ndev_vec_mask()
ntb_netdev: fix sleep time mismatch
Pull scheduler fixes from Ingo Molnar:
"A memory (under-)allocation fix and a comment fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Fix off by one bug
sched/rt: Update comment in pick_next_task_rt()
Pull x86 fixes from Ingo Molnar:
"A number of fixes and some late updates:
- make in_compat_syscall() behavior on x86-32 similar to other
platforms, this touches a number of generic files but is not
intended to impact non-x86 platforms.
- objtool fixes
- PAT preemption fix
- paravirt fixes/cleanups
- cpufeatures updates for new instructions
- earlyprintk quirk
- make microcode version in sysfs world-readable (it is already
world-readable in procfs)
- minor cleanups and fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Cleanup in_compat_syscall() callers
x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
objtool: Support GCC 9 cold subfunction naming scheme
x86/numa_emulation: Fix uniform-split numa emulation
x86/paravirt: Remove unused _paravirt_ident_32
x86/mm/pat: Disable preemption around __flush_tlb_all()
x86/paravirt: Remove GPL from pv_ops export
x86/traps: Use format string with panic() call
x86: Clean up 'sizeof x' => 'sizeof(x)'
x86/cpufeatures: Enumerate MOVDIR64B instruction
x86/cpufeatures: Enumerate MOVDIRI instruction
x86/earlyprintk: Add a force option for pciserial device
objtool: Support per-function rodata sections
x86/microcode: Make revision and processor flags world-readable
Pull perf updates and fixes from Ingo Molnar:
"These are almost all tooling updates: 'perf top', 'perf trace' and
'perf script' fixes and updates, an UAPI header sync with the merge
window versions, license marker updates, much improved Sparc support
from David Miller, and a number of fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
perf intel-pt/bts: Calculate cpumode for synthesized samples
perf intel-pt: Insert callchain context into synthesized callchains
perf tools: Don't clone maps from parent when synthesizing forks
perf top: Start display thread earlier
tools headers uapi: Update linux/if_link.h header copy
tools headers uapi: Update linux/netlink.h header copy
tools headers: Sync the various kvm.h header copies
tools include uapi: Update linux/mmap.h copy
perf trace beauty: Use the mmap flags table generated from headers
perf beauty: Wire up the mmap flags table generator to the Makefile
perf beauty: Add a generator for MAP_ mmap's flag constants
tools include uapi: Update asound.h copy
tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies
tools include uapi: Update linux/fs.h copy
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
perf cs-etm: Correct CPU mode for samples
perf unwind: Take pgoff into account when reporting elf to libdwfl
perf top: Do not use overwrite mode by default
perf top: Allow disabling the overwrite mode
perf trace: Beautify mount's first pathname arg
...
Pull irq fixes from Ingo Molnar:
"An irqchip driver fix and a memory (over-)allocation fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function
irq/matrix: Fix memory overallocation
