HDMI Tx needs HDMI Tx memory power domain turned on. This power domain is
handled under the VPU power domain.
The HDMI Tx currently works because it is enabling the PD by directly
poking the power controller register. It is should not do that but properly
use the power domain controller.
Fix this by adding the power domain to HDMI Tx.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240625145017.1003346-3-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Spdif output currently uses a 0.5mA drive strength by default.
While the result depends on how the spdif output is hooked to
rest of the system, this is a bit weak and signal quality
may be poor. This was reported on the vim3l for example.
Increase the drive strength to 3mA, as used for TDM, to be on the
safe side.
Fixes: 649675db93 ("arm64: dts: meson: g12a: add spdifouts")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240625115443.934763-1-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Dreambox One and Dreambox Two are based on the Amlogic W400 reference
board with an S922X chip and the following specs:
- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.1 video
- S/PDIF optical output
- 2x DVB-S2/T2
- Smartcard Reader Slot
- 2x USB 2.0 port (1x micro-USB for service)
- 1x USB 3.0 port
- IR receiver
- 1x Power LED (blue)
- 1x Power button (top)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Dreambox Two differences:
- 3" Colour LCD display (MIPI-DSI)
- Common Interface Slot
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622140112.2609534-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The OSMC Vero 4K device is based on the Amlogic S905X (P212)
reference design with the following specifications:
- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622135117.2608890-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This fixes the following:
interrupt-controller@4080: compatible: 'oneOf' conditional failed, one must be fixed:
['amlogic,meson-gpio-intc', 'amlogic,c3-gpio-intc'] is too long
'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,c3-gpio-intc', 'amlogic,t7-gpio-intc']
'amlogic,meson-gpio-intc' was expected
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-9-62e812729541@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
board. This is a low-cost design similar to P281 (S905W) but with
silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The
SoC is marked with S905L and "2" (believed to denote MP2) resulting
in chip distributor stock lists and Android STB marketing sometimes
describing it as an S905L2 chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604084134.3315841-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Pull drm fixes from Dave Airlie:
"This is the weekly fixes. Lots of small fixes across the board, one
BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
mostly with small fixes to all the other drivers.
shmem:
- fix BUG_ON in COW handling
- warn when trying to pin imported objects
buddy:
- fix page size handling
dma-buf:
- sw-sync: Don't interfere with IRQ handling
- fix kthreads-handling error path
i915:
- fix a race in audio component by registering it later
- make DPT object unshrinkable to avoid shrinking when framebuffer
has not shrunk
- fix CCS id calculation to fix a perf regression
- fix selftest caching mode
- fix FIELD_PREP compiler warnings
- fix indefinite wait for GT wakeref release
- revert overeager multi-gt pm reference removal
xe:
- pcode polling timeout change
- fix for deadlocks for faulting VMs
- error-path lock imbalance fix
amdgpu:
- RAS fix
- fix colorspace property for MST connectors
- fix for PCIe DPM
- silence UBSAN warning
- GPUVM robustness fix
- partition fix
- drop deprecated I2C_CLASS_SPD
amdkfd:
- revert unused changes for certain 11.0.3 devices
- simplify APU VRAM handling
lima:
- fix dma_resv-related deadlock in object pin
msm:
- remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- fix dma_resv-related deadlock in object pin"
* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/msm: remove python 3.9 dependency for compiling msm
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
drm/amdgpu: Make CPX mode auto default in NPS4
drm/amdkfd: simplify APU VRAM handling
Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
drm/amdgpu: silence UBSAN warning
drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
drm/i915: Fix audio component initialization
drm/i915/dpt: Make DPT object unshrinkable
drm/i915/gt: Fix CCS id's calculation for CCS mode setting
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
drm/i915/selftests: Set always_coherent to false when reading from CPU
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/i915/guc: avoid FIELD_PREP warning
drm/i915/gt: Disarm breadcrumbs if engines are already idle
Revert "drm/i915: Remove extra multi-gt pm-references"
...
Pull mailbox fix from Jassi Brar:
- zynqmp-ipi: fix linker error on some configurations
* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: zynqmp-ipi: drop irq_to_desc() call
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- Removing unused fields (Kanchan)
- Large folio offsets support (Kundan)
- Multipath NUMA node initialiazation fix (Nilay)
- Multipath IO stats accounting fixes (Keith)
- Circular lockdep fix (Keith)
- Target race condition fix (Sagi)
- Target memory leak fix (Sagi)
- bcache fixes
- null_blk fixes (Damien)
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
Pull io_uring fixes from Jens Axboe:
"A couple of minor fixes for issues introduced in the 6.10 merge window:
- Ensure that all read/write ops have an appropriate cleanup handler
set (Breno)
- Regression for applications still doing multiple mmaps even if
FEAT_SINGLE_MMAP is set (me)
- Move kmsg inquiry setting above any potential failure point,
avoiding a spurious NONEMPTY flag setting on early error (me)"
* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
io_uring/net: assign kmsg inq/flags before buffer selection
io_uring/rw: Free iovec before cleaning async data
io_uring: don't attempt to mmap larger than what the user asks for
