needs_wa_1607983814() predates wa_oob, so it was not being printed
in /sys/kernel/debug/dri/0/*/workarounds. Port it to OOB rules.
This makes the WA show up in debugfs. For TGL:
OOB Workarounds
1607983814
22012773006
1409600907
Eventually the RTP infra may add support for writing registers in a
loop, which would allow to keep track of the registers as well. But for
now, just listing it as OOB workaround is already an improvement.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029193258.749882-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Short circuiting TDR on jobs not started is an optimization which is not
required. On LNL we are facing an issue where jobs do not get scheduled
by the GuC if it misses a GGTT page update. When this occurs let the TDR
fire, toggle the scheduling which may get the job unstuck, and print a
warning message. If the TDR fires twice on job that hasn't started,
timeout the job.
v2:
- Add warning message (Paulo)
- Add fixes tag (Paulo)
- Timeout job which hasn't started after TDR firing twice
v3:
- Include local change
v4:
- Short circuit check_timeout on job not started
- use warn level rather than notice (Paulo)
Fixes: 7ddb9403dd ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Cc: stable@vger.kernel.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The guc_info debugfs file is meant to be a quick view of the current
software state of the GuC interface. Including the full CTB contents
makes the file as a whole much less human readable and is not
partiular useful in the general case. So don't pollute the info dump
with the full buffers. Instead, move those into a separate debugfs
entry that can be read when that information is actually required.
Also, improve the human readability by adding a few extra blank lines
to delimt the sections.
v2: Hide the internal capture/print params from external callers that
don't need to know (review feedback from Matthew Brost).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024002554.1983101-3-John.C.Harrison@Intel.com
In addition to stream open, add xe_sync support to the OA config ioctl,
where it is even more useful. This allows e.g. Mesa to replay a workload
repeatedly on the GPU, each time with a different OA configuration, while
precisely controlling (at batch buffer granularity) the workload segment
for which a particular OA configuration is active, without introducing
stalls in the userspace pipeline.
v2: Emit OA config even when config id is same as previous, to ensure
consistent sync behavior (Jose)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-7-ashutosh.dixit@intel.com
Introduce 'struct xe_oa_fence' which includes the dma_fence used to signal
output fences in the xe_sync array. The fences are signaled
asynchronously. When there are no output fences to signal, the OA
configuration wait is synchronously re-introduced into the ioctl.
v2: Don't wait in the work, use callback + delayed work (Matt B)
Use a single, not a per-fence spinlock (Matt Brost)
v3: Move ofence alloc before job submission (Matt)
Assert, don't fail, from dma_fence_add_callback (Matt)
Additional dma_fence_get for dma_fence_wait (Matt)
Change dma_fence_wait to non-interruptible (Matt)
v4: Introduce last_fence to prevent uaf if stream is closed with
pending OA config jobs
v5: Remove oa_fence_lock, move spinlock back into xe_oa_fence to
prevent uaf
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-5-ashutosh.dixit@intel.com
When we introduce xe_syncs, we don't wait for internal OA programming
batches to complete. That is, xe_syncs are signaled asynchronously. In
anticipation for this, separate out batch submission from waiting for
completion of those batches.
v2: Change return type of xe_oa_submit_bb to "struct dma_fence *" (Matt B)
v3: Retain init "int err = 0;" in xe_oa_submit_bb (Jose)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-2-ashutosh.dixit@intel.com
The lite restore is a performance improvement feature which avoids
unnecessary context switch (flush, save and restore) if the incoming
context has a ContextID matching that of the outgoing context. The
scheduling is done by the GuC firmware, so on the driver side it's
just a matter of setting corresponding GUC_CTL_FEATURE flag.
This is supposed to be enabled by default, thus the flag is set
unconditionally.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017162710.942553-2-fei.yang@intel.com
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Update the return handling of xe_force_wake_get()
to reflect this behavior, and ensure that the return value is passed as
input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be escalated/considered as
probing error. It internally WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
v7
- Fix commit message
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-24-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With xe_force_wake_get() now returning the refcount-incremented
domain mask, a non-zero return value in the case of XE_FORCEWAKE_ALL
does not necessarily indicate success. Use xe_force_wake_ref_has_domain()
to determine the status of the call.
Modify the return handling of xe_force_wake_get() accordingly and
pass the return value to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
v6
- Use helper Use xe_force_wake_ref_has_domain()
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-23-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With xe_force_wake_get() now returning the refcount-incremented
domain mask, a non-zero return value in the case of XE_FORCEWAKE_ALL does
not necessarily indicate success. Use xe_force_wake_ref_has_domain()
to determine the status of the call.
Modify the return handling of xe_force_wake_get() accordingly and
pass the return value to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
v6
- use helper xe_force_wake_ref_has_domain()
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-22-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Update the return handling of xe_force_wake_get()
to reflect this behavior, and ensure that the return value is passed as
input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
- don't use xe_assert() to report HW errors (Michal)
v5
- return unsigned int from xe_force_wake_get()
- remove redundant warns
v7
- Fix commit message
- Remove redundant header
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-20-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With xe_force_wake_get() now returning the refcount-incremented domain
mask, a non-zero return value in the case of XE_FORCEWAKE_ALL does not
necessarily indicate success. use xe_force_wake_ref_has_domain ()
to determine the status of the call.
Modify the return handling of xe_force_wake_get() accordingly and pass
the return value to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
v6
- Use helper xe_force_wake_ref_has_domain()
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-19-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to
verify all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
- Remove redundant xe_gt_WARN_ON
v6
- use helper xe_force_wake_ref_has_domain()
v7
- Fix commit message
v9
- Rebase
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-17-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With xe_force_wake_get() now returning the refcount-incremented
domain mask, a non-zero return value in the case of XE_FORCEWAKE_ALL does
not necessarily indicate success. Use xe_force_wake_ref_has_domain()
determine the status of the call.
Modify the return handling of xe_force_wake_get() accordingly and
pass the return value to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int for xe_force_wake_get()
v6
- use helper xe_force_wake_ref_has_domain()
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-16-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to
verify all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v5
- return unsigned int from xe_force_wake_get()
v6
- use xe_force_wake_ref_has_domain()
v7
- Fix commit message
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-15-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to
verify all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
v5
- return unsigned int for xe_force_wake_get()
v6
- use helper xe_force_wake_ref_has_domain()
v7
- Fix commit message
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-12-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
