Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to armada_fbdev_setup() after armada has registered its
DRM device. As in most drivers, aramda's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within armada. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-5-tzimmermann@suse.de
This bridge doesn't actually implement HPD due to it being way too slow
but instead expects the panel driver to wait enough to assume HPD is
asserted. However some panels (such as the generic 'edp-panel') expect
the bridge to deal with the delay and pass maximum delay to the aux
instead.
In order to support such panels, add a dummy implementation of wait
that would just sleep the maximum delay and assume no failure has
happened.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230408082014.235425-1-nikita@trvn.ru
STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update the config and build rules such that the code depends
on the config symbol CONFIG_STI_CORE, which STI console and STI
framebuffer select automatically.
Cleans up the console makefile and prepares PARISC to implement
fb_is_primary_device() within the arch/ directory. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-12-tzimmermann@suse.de
Generic implementations of fb_pgprotect() and fb_is_primary_device()
have been in the source code for a long time. Prepare the header file
to make use of them.
Improve the code by using an inline function for fb_pgprotect()
and by removing include statements. The default mode set by
fb_pgprotect() is now writecombine, which is what most platforms
want.
Symbols are protected by preprocessor guards. Architectures that
provide a symbol need to define a preprocessor token of the same
name and value. Otherwise the header file will provide a generic
implementation. This pattern has been taken from <asm/io.h>.
v3:
* include the correct header files
v2:
* use writecombine mappings by default (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-2-tzimmermann@suse.de
Currently, drm_gem_fb_create() doesn't check if the pixel format is
supported, which can lead to the acceptance of invalid pixel formats
e.g. the acceptance of invalid modifiers. Therefore, add a check for
valid formats on drm_gem_fb_create().
Note that this check is only valid for atomic drivers, because, for
non-atomic drivers, checking drm_any_plane_has_format() is not
possible since the format list for the primary plane is fake, and we'd
therefore reject valid formats.
Adding this check to drm_gem_fb_create() will guarantee that the
igt@kms_addfb_basic@addfb25-bad-modifier IGT test passes for drivers
using this callback.
This commit is a recapture of a series sent a while ago. Initially,
I sent a patch [1] similar to this one in which I introduced the
format check to drm_gem_fb_create().
Based on the feedback on the patch, I placed the check inside
framebuffer_check() [2] so that it wouldn't be needed to hit any
driver-specific code path when the check fails. Therefore, we could
remove the check from the specific drivers (i915, amdgpu, and vmwgfx).
But, with some new feedback, it was shown that introducing this check
inside framebuffer_check() is problematic for the i915 driver [3].
For the i915 driver, in the legacy case, in which we don't get the
modifier from the userspace, i915's fb_create hook computes the right
modifier, which isn't necessarily linear. Therefore, if we check the
modifier before that point, we might get wrong answers.
So, I kept the check inside the i915 driver and removed the check from
amdgpu and vmwgfx [4]. But, this yet hasn't solved the i915 problem [5].
As we cannot add the check inside framebuffer_check() without
affecting the i915 behavior, this commit went back to the original
patch. This way we can guarantee a more uniform behavior from the
drivers that use the drm_gem_fb_create() callback.
[1] https://lore.kernel.org/dri-devel/20230103125322.855089-1-mcanal@igalia.com/T/
[2] https://lore.kernel.org/dri-devel/20230109105807.18172-1-mcanal@igalia.com/T/
[3] https://lore.kernel.org/dri-devel/Y8AAdW2y7zN7DCUZ@intel.com/
[4] https://lore.kernel.org/dri-devel/20230113112743.188486-1-mcanal@igalia.com/T/
[5] https://lore.kernel.org/dri-devel/Y8FXWvEhO7GCRKVJ@intel.com/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412142923.136707-1-mcanal@igalia.com
It already happend a few times that patches slipped through which
implemented access to an entity through a job that was already removed
from the entities queue. Since jobs and entities might have different
lifecycles, this can potentially cause UAF bugs.
In order to make it obvious that a jobs entity pointer shouldn't be
accessed after drm_sched_entity_pop_job() was called successfully, set
the jobs entity pointer to NULL once the job is removed from the entity
queue.
Moreover, debugging a potential NULL pointer dereference is way easier
than potentially corrupted memory through a UAF.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the functions “nvkm_fanpwm_create” and “nvkm_fantog_create”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the data structure member “fan” behind two null pointer checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d0215dc-74d4-2c42-2eee-7a5fcf62b9f1@web.de
Backmerging drm-next to sync with msm tree. Resolves a conflict
between aperture-helper changes and msm's use of those interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The hardware for gma500 is different from the rest, as it uses stolen
framebuffer memory that is not available via PCI BAR. The regular PCI
removal helper cannot detect the framebuffer, while the non-PCI helper
misses possible conflicting VGA devices (i.e., a framebuffer or text
console).
Gma500 therefore calls both helpers to catch all cases. It's confusing
as it implies that there's something about the PCI device that requires
ownership management. The relationship between the PCI device and the
VGA devices is non-obvious. At worst, readers might assume that calling
two functions for clearing aperture ownership is a bug in the driver.
Hence, move the PCI removal helper's code for VGA functionality into
a separate function and call this function from gma500. Documents the
purpose of each call to aperture helpers. The change contains comments
and example code form the discussion at [1].
v5:
* fix grammar in gma500 comment (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230404201842.567344-1-daniel.vetter@ffwll.ch/ # 1
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-10-tzimmermann@suse.de
vga_default_device really is supposed to cover all corners, at least
for x86. Additionally checking for rom shadowing should be redundant,
because the bios/fw only does that for the boot vga device.
If this turns out to be wrong, then most likely that's a special case
which should be added to the vgaarb code, not replicated all over.
Patch motived by changes to the aperture helpers, which also have this
open code in a bunch of places, and which are all removed in a
clean-up series. This function here is just for selecting the default
fbdev device for fbcon, but I figured for consistency it might be good
to throw this patch in on top.
Note that the shadow rom check predates vgaarb, which was only wired
up in commit 88674088d1 ("x86: Use vga_default_device() when
determining whether an fb is primary"). That patch doesn't explain why
we still fall back to the shadow rom check.
v4:
- fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-9-tzimmermann@suse.de
Instead of calling aperture_remove_conflicting_devices() to remove the
conflicting devices, just call to aperture_detach_devices() to detach
the device that matches the same PCI BAR / aperture range. Since the
former is just a wrapper of the latter plus a sysfb_disable() call,
and now that's done in this function but only for the primary devices.
This fixes a regression introduced by commit ee7a69aa38 ("fbdev:
Disable sysfb device registration when removing conflicting FBs"),
where we remove the sysfb when loading a driver for an unrelated pci
device, resulting in the user losing their efifb console or similar.
Note that in practice this only is a problem with the nvidia blob,
because that's the only gpu driver people might install which does not
come with an fbdev driver of it's own. For everyone else the real gpu
driver will restore a working console.
Also note that in the referenced bug there's confusion that this same
bug also happens on amdgpu. But that was just another amdgpu specific
regression, which just happened to happen at roughly the same time and
with the same user-observable symptoms. That bug is fixed now, see
https://bugzilla.kernel.org/show_bug.cgi?id=216331#c15
Note that we should not have any such issues on non-pci multi-gpu
issues, because I could only find two such cases:
- SoC with some external panel over spi or similar. These panel
drivers do not use drm_aperture_remove_conflicting_framebuffers(),
so no problem.
- vga+mga, which is a direct console driver and entirely bypasses all
this.
For the above reasons the cc: stable is just notionally, this patch
will need a backport and that's up to nvidia if they care enough.
v2:
- Explain a bit better why other multi-gpu that aren't pci shouldn't
have any issues with making all this fully pci specific.
v3
- polish commit message (Javier)
v4:
- Fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Fixes: ee7a69aa38 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303#c28
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # v5.19+ (if someone else does the backport)
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-8-tzimmermann@suse.de
