For locking semantics it really doesn't matter when we grab the
ticket. But for lockdep validation it does: the acquire ctx is a fake
lockdep. Since other drivers might want to do a full multi-lock dance
in their fault-handler, not just lock a single dma_resv. Therefore we
must init the acquire_ctx only after we've done all the copy_*_user or
anything else that might trigger a pagefault. For msm this means we
need to move it past submit_lookup_objects.
Aside: Why is msm still using struct_mutex, it seems to be using
dma_resv_lock for general buffer state protection?
v2:
- Add comment to explain why the ww ticket setup is separate (Rob)
- Fix up error handling, we need to make sure we don't call
ww_acquire_fini without _init.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-and-tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191120105607.3023-1-daniel.vetter@ffwll.ch
Semnatically it really doesn't matter where we grab the ticket. But
since the ticket is a fake lockdep lock, it matters for lockdep
validation purposes.
This means stuff like grabbing a ticket and then doing
copy_from/to_user isn't allowed anymore. This is a changed compared to
the current ttm fault handler, which doesn't bother with having a full
reservation. Since I'm looking into fixing the TODO entry in
ttm_mem_evict_wait_busy() I think that'll have to change sooner or
later anyway, better get started. A bit more context on why I'm
looking into this: For backwards compat with existing i915 gem code I
think we'll have to do full slowpath locking in the i915 equivalent of
the eviction code. And with dynamic dma-buf that will leak across
drivers, so another thing we need to standardize and make sure it's
done the same way everyway.
Unfortunately this means another full audit of all drivers:
- gem helpers: acquire_init is done right before taking locks, so no
problem. Same for acquire_fini and unlocking, which means nothing
that's not already covered by the dma_resv_lock rules will be caught
with this extension here to the acquire_ctx.
- etnaviv: An absolute massive amount of code is run between the
acquire_init and the first lock acquisition in submit_lock_objects.
But nothing that would touch user memory and could cause a fault.
Furthermore nothing that uses the ticket, so even if I missed
something, it would be easy to fix by pushing the acquire_init right
before the first use. Similar on the unlock/acquire_fini side.
- i915: Right now (and this will likely change a lot rsn) the acquire
ctx and actual locks are right next to each another. No problem.
- msm has a problem: submit_create calls acquire_init, but then
submit_lookup_objects() has a bunch of copy_from_user to do the
object lookups. That's the only thing before submit_lock_objects
call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv
does not have this issue since it copies all the userspace structs
earlier. submit_cleanup does not have any such issues.
With the prep patch to pull out the acquire_ctx and reorder it msm
is going to be safe too.
- nouveau: acquire_init is right next to ttm_bo_reserve, so all good.
Similar on the acquire_fini/ttm_bo_unreserve side.
- ttm execbuf utils: acquire context and locking are even in the same
functions here (one function to reserve everything, the other to
unreserve), so all good.
- vc4: Another case where acquire context and locking are handled in
the same functions (one function to lock everything, the other to
unlock).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Huang Rui <ray.huang@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch
psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.
When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.
Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
The udl driver can use the generic fbdev implementation. Convert it.
v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-2-tzimmermann@suse.de
In case of tiled displays, if we hotplug just one connector,
fbcon currently just selects the preferred mode and if it is
tiled mode then that becomes a problem if rest of the tiles are
not present.
So in the fbdev driver on hotplug when we probe the client modeset,
if we dont find all the connectors for all tiles, then on a connector
with one tile, just fallback to the first available non tiled mode
to display over a single connector.
On the hotplug of the consecutive tiled connectors, if the tiled mode
no longer exists because of fbcon size limitation, then return
no modes for consecutive tiles but retain the non tiled mode
on the 0th tile.
Use the same logic in case of connected boot case as well.
This has been tested with Dell UP328K tiled monitor.
v2:
* Set the modes on consecutive hotplugged tiles to no mode
if tiled mode is pruned (Dave)
v1:
* Just handle the 1st connector hotplug case
* v1 Reviewed-by: Dave Airlie <airlied@redhat.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113222952.9231-1-manasi.d.navare@intel.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:594:7: warning: variable is_hdmi set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:593:7: warning: variable is_crt set but not used [-Wunused-but-set-variable]
They are not used since commit acd7ef927e ("gma500:
Update the Cedarview clock handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-4-git-send-email-zhengbin13@huawei.com
