Condition guards are found to be redundant, as the call flow is properly
managed now, as also observed in the Exynos5433 DECON driver. Since
state checking is no longer necessary, remove it.
This also fixes an issue which prevented decon_commit() from
decon_atomic_enable() due to an incorrect state change setting.
Fixes: 96976c3d9a ("drm/exynos: Add DECON driver")
Cc: stable@vger.kernel.org
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Similar to FIMD and Exynos5433's DECON, the Exynos7 DECON hardware:
- May optionally require an IOMMU to initialize a display region.
- Outputs image data to another block, say an MIC or a DSI master.
If an IOMMU is present, it may also require to access the reserved
framebuffer region.
Document these bindings in the devicetree schema.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add compatible string for Exynos7870 DSIM bridge controller. The
device requires four clock sources, in schema they're named as "bus",
"pll", "byte", and "esc".
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull generic phy driver fixes from Vinod Koul:
- Qualcomm repeater override properties, qmp pcie bindings fix for
clocks and initialization sequence for firmware power down case
- Marvell comphy bindings clock and child node constraints
- Tegra xusb device reference leaks fix
- TI omap usb device ref leak on unbind and RGMII IS settings fix
* tag 'phy-fix-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware
phy: ti: gmii-sel: Always write the RGMII ID setting
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
phy: ti-pipe3: fix device leak at unbind
phy: ti: omap-usb2: fix device leak at unbind
phy: tegra: xusb: fix device and OF node leak at probe
dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints
phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology parsing bug on AMD guests, and address
a lockdep warning in the resctrl filesystem"
* tag 'x86-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Eliminate false positive lockdep warning when reading SNC counters
x86/cpu/topology: Always try cpu_parse_topology_ext() on AMD/Hygon
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
Pull erofs fixes from Gao Xiang:
- Fix invalid algorithm dereference in encoded extents
- Add missing dax_break_layout_final(), since recent FSDAX fixes
didn't cover EROFS
- Arrange long xattr name prefixes more properly
* tag 'erofs-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix long xattr name prefix placement
erofs: fix runtime warning on truncate_folio_batch_exceptionals()
erofs: fix invalid algorithm for encoded extents
Pull ceph fixes from Ilya Dryomov:
"A fix for a race condition around r_parent tracking that took a long
time to track down from Alex and some fixes for potential crashes on
accessing invalid memory from Max and myself.
All marked for stable"
* tag 'ceph-for-6.17-rc6' of https://github.com/ceph/ceph-client:
libceph: fix invalid accesses to ceph_connection_v1_info
ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error
ceph: always call ceph_shift_unused_folios_left()
ceph: fix race condition where r_parent becomes stale before sending message
ceph: fix race condition validating r_parent before applying state
Pull regulator fix from Mark Brown:
"One fix for sy7636a which got confused about which device to use to
manage the lifecycle of the power good GPIO because it's looked up
from the parent device due to the way DT bindings work"
* tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sy7636a: fix lifecycle of power good gpio
Pull driver core fixes from Danilo Krummrich:
- Fix UAF in cgroup pressure polling by using kernfs_get_active_of()
to prevent operations on released file descriptors
- Fix unresolved intra-doc link in the documentation of struct Device
when CONFIG_DRM != y
- Update the DMA Rust MAINTAINERS entry
* tag 'driver-core-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Update the DMA Rust entry
kernfs: Fix UAF in polling when open file is released
rust: device: fix unresolved link to drm::Device
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
mediatek:
- fix potential OF node use-after-free
panthor:
- out-of-bounds check
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
Pull smb client fixes from Steve French:
"Two smb3 client fixes, both for stable:
- Fix encryption problem with multiple compounded ops
- Fix rename error cases that could lead to data corruption"
* tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix data loss due to broken rename(2)
smb: client: fix compound alignment with encryption
Johan writes:
USB serial device ids for 6.17-rc6
Here are some new modem device ids.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
Update the DMA Rust maintainers entry in the following two aspects:
(1) Change Abdiel's entry to 'Reviewer'.
(2) Take patches through the driver-core tree.
Abdiel won't do any more maintainer work on the DMA (or scatterlist)
infrastructure, but he'd like to be kept in the loop, hence change is
entry to 'R:'.
Analogous to [1], the DMA (and scatterlist) helpers are closely coupled
with the core device infrastructure and the device lifecycle, hence take
patches through the driver-core tree by default.
Cc: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250725202840.2251768-1-ojeda@kernel.org [1]
Acked-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, xattr name prefixes are forcibly placed into the packed
inode if the fragments feature is enabled, and users have no option
to put them in plain form directly on disk.
This is inflexible. First, as mentioned above, users should be able
to store unwrapped long xattr name prefixes unconditionally
(COMPAT_PLAIN_XATTR_PFX). Second, since we now have the new metabox
inode to store metadata, it should be used when available instead
of the packed inode.
Fixes: 414091322c ("erofs: implement metadata compression")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
If GuC hangs, the GuC logs might not contain enough information to
understand exactly why the hang occurred. In this case, we need to
look at the GuC HW state to try to understand where the GuC is stuck. It
is therefore useful to include the GuC HW state in the error capture.
The list of registers that are part of the GuC HW state can change based
on platform, but it is the same for all platforms from TGL to MTL so we
only need to support one version for i915.
v2: revised list
v3: remove confusing comment, use sizeof(u32) instead of 4 (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909223621.3782625-2-daniele.ceraolospurio@intel.com
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
Pull s390 fixes from Alexander Gordeev:
- ptep_modify_prot_start() may be called in a loop, which might lead to
the preempt_count overflow due to the unnecessary preemption
disabling. Do not disable preemption to prevent the overflow
- Events of type PERF_TYPE_HARDWARE are not tested for sampling and
return -EOPNOTSUPP eventually.
Instead, deny all sampling events by CPUMF counter facility and
return -ENOENT to allow other PMUs to be tried
- The PAI PMU driver returns -EINVAL if an event out of its range. That
aborts a search for an alternative PMU driver.
Instead, return -ENOENT to allow other PMUs to be tried
* tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: Deny all sampling events by counter PMU
s390/pai: Deny all events not handled by this PMU
s390/mm: Prevent possible preempt_count overflow
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
