TI K3 device tree updates for v6.16
Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
* tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits)
arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640
arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX
arm64: dts: ti: j722s-evm: Add DT nodes for power regulators
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps
arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
arm64: dts: ti: k3-j721s2: Add GPU node
arm64: dts: ti: k3-am62: New GPU binding details
arm64: dts: ti: k3-am62-main: Add PRUSS-M node
arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
...
Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the clock device tree bindings to yaml for the Altera SoCFPGA
Cyclone5, Arria5, and Arria10 chip families. Since the clock nodes are
subnodes to Altera SOCFPGA Clock Manager, the yaml was added to
socfpga-clk-manager.yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Device tree bindings updates for v6.16-rc1
Convert the legacy interrupt controller (LIC) and APBDMA controller
device tree bindings from freeform text to dt-schema.
Document the ASUS Transformer Pad TF300TL compatible string and add
missing compatible strings for newer generations of the Tegra CEC.
* tag 'tegra-for-6.16-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
media: dt-bindings: Document Tegra186 and Tegra194 cec
dt-bindings: arm: tegra: Add Asus Transformer Pad TF300TL
dt-bindings: arm: tegra: Group Tegra30 based ASUS Transformers
dt-bindings: interrupt-controller: Convert nvidia,tegra20-ictlr to DT schema
dt-bindings: dma: nvidia,tegra20-apbdma: convert text based binding to json schema
Link: https://lore.kernel.org/r/20250509212604.2849901-1-treding@nvidia.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New boards: rk3588-evb2, rk3588-tiger-haikou-video-demo-overlay
- New peripherals: RNG+PCIe+SATA on rk3576; eDP on rk3588;
DMA+I2C+PWM on rk3528; DSI on rk3588
- SPI-flash binding got a supply-property, so a number of boards add
this supply.
- RK3588 wrongly declared the shared memory with SCMI in the peripheral
space - moved to the correct reserved-memory structure now.
- The rest is peripheral enablement accross many boards - like hdmi
output for a big number of boards, regulators, eeprom, etc.
* tag 'v6.16-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (52 commits)
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
arm64: dts: rockchip: Enable regulators for Radxa E20C
arm64: dts: rockchip: Add pwm nodes for RK3528
arm64: dts: rockchip: Add onboard EEPROM for Radxa E20C
arm64: dts: rockchip: Add I2C controllers for RK3528
arm64: dts: rockchip: add RK3576 RNG node
arm64: dts: rockchip: Switch to undeprecated qcom,calibration-variant on RK3399
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-quartz64-b
arm64: dts: rockchip: Add phy-supply to gmac0 on NanoPi R5S
arm64: dts: rockchip: fix usb-c port functionality on rk3588-nanopc-t6
arm64: dts: rockchip: Enable bluetooth of AP6611s on OrangePI5 Max/Ultra
arm64: dts: rockchip: add SATA nodes to RK3576
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5b
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-rockpro64
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3328-rock64
arm64: dts: rockchip: Add vcc supply to spi flash on rk3399-roc-pc
arm64: dts: rockchip: enable pcie on Sige5
arm64: dts: rockchip: Add HDMI support for roc-rk3576-pc
arm64: dts: rockchip: Enable HDMI0 audio output for Indiedroid Nova
...
Link: https://lore.kernel.org/r/2307187.iZASKD2KPV@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
* tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
ARM: dts: Drop DTS for BCM59056 PMU
ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI
ARM: dts: bcm2166x-common: Add pinctrl node
Link: https://lore.kernel.org/r/20250505165810.1948927-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DT binding updates for v6.16
- Document support for the Renesas RZ/T2H (R9A09G077) SoC and the
RZT2H-EVK evaluation board,
- Document support for the Retronix Sparrow Hawk board, which is based
on R-Car V4H ES3.0.
* tag 'renesas-dt-bindings-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document Retronix R-Car V4H Sparrow Hawk board support
dt-bindings: vendor-prefixes: Add Retronix Technology Inc.
dt-bindings: soc: renesas: Add Renesas RZ/T2H (R9A09G077) SoC
Link: https://lore.kernel.org/r/cover.1745582594.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add devicetree bindings for PHYTEC phyBOARD-Nash-i.MX93 board based on
the existing PHYTEC phyCORE-i.MX93 SoM (System-on-Module).
Adjust the compatibles for the existing phyBOARD-Segin-i.MX93 board, to
be able to add additional board based on the phyCORE-i.MX93 SoM.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx8mp-libra-rdk-fpsc is a development board based on the phyCORE-i.MX
8M Plus FPSC SoM. Add its description and binding. The
imx8mp-phycore-fpsc som differs from the existing phyCORE-i.MX 8M Plus
(dts: imx8mp-phycore-som.dtsi) in its physical form regarding the ball
grid array. Other differences between the SoMs are missing SPI-NOR on
this SoM and 1.8V IO voltage instead of 3.3V as found on the existing
imx8mp-phycore-som. As a result the imx8mp-phycore-som is not compatible
with this new libra development board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Nitrogen8M Plus System on Module and the Nitrogen8M
Plus ENC Carrier Board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull misc hotfixes from Andrew Morton:
"16 hotfixes. 2 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS"
[ Basic counting skills are clearly not a strictly necessary requirement
for kernel maintainers. - Linus ]
* tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add section for locking of mm's and VMAs
mm: vmscan: fix kswapd exit condition in defrag_mode
mm: vmscan: restore high-cpu watermark safety in kswapd
MAINTAINERS: add Pedro as reviewer to the MEMORY MAPPING section
mm/memory: move sanity checks in do_wp_page() after mapcount vs. refcount stabilization
mm, hugetlb: increment the number of pages to be reset on HVO
writeback: fix false warning in inode_to_wb()
docs: ABI: replace mcroce@microsoft.com with new Meta address
mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable()
MAINTAINERS: add memory advice section
MAINTAINERS: add mmap trace events to MEMORY MAPPING
mm: memcontrol: fix swap counter leak from offline cgroup
MAINTAINERS: add MM subsection for the page allocator
MAINTAINERS: update SLAB ALLOCATOR maintainers
fs/dax: fix folio splitting issue by resetting old folio order + _nr_pages
mm/page_alloc: fix deadlock on cpu_hotplug_lock in __accept_page()
Pull power management fixes from Rafael Wysocki:
"These are mostly cpufreq fixes, some of which address recent
regressions and some address older issues that have come to light
during the last two weeks, and a runtime PM documentation correction:
- Fix the performance-to-frequency scaling factor computation on
systems using HWP in the intel_pstate driver after a recent
incorrect update of it (Rafael Wysocki)
- Fix the usage of the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag
in the schedutil cpufreq governor after a recent update of it that
has caused frequency limits changes to be missed sometimes (Rafael
Wysocki)
- Address some recently discovered synchronization issues related to
frequency limits changes in the schedutil cpufreq governor and in
the cpufreq core (Rafael Wysocki)
- Fix ITMT support in the amd-pstate cpufreq driver so that it is
enabled after asym priorities have been correctly initialized for
all CPUs (K Prateek Nayak)
- Fix changing min/max limits in the amd-pstate cpufreq driver while
on the performance governor (Dhananjay Ugwekar)
- Fix a function name in the runtime PM documentation that was
previously incorrectly updated by mistake (Sakari Ailus)"
* tag 'pm-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid using inconsistent policy->min and policy->max
cpufreq/sched: Set need_freq_update in ignore_dl_rate_limit()
cpufreq/sched: Explicitly synchronize limits_changed flag handling
cpufreq/sched: Fix the usage of CPUFREQ_NEED_UPDATE_LIMITS
Documentation: PM: runtime: Fix a reference to pm_runtime_autosuspend()
cpufreq: intel_pstate: Fix hwp_get_cpu_scaling()
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an issue where C instructions ended up in non-C builds, due
to some broken inline assembly in the KGDB breakpoint insertion code
- A fix to avoid spurious printk messages about misaligned access
performance probing
- A fix for a handful of issues with /proc/iomem's reserved region
handling
- A pair of fixes for module relocation processing
- A few build-time fixes
* tag 'riscv-for-linus-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: KGDB: Remove ".option norvc/.option rvc" for kgdb_compiled_break
riscv: KGDB: Do not inline arch_kgdb_breakpoint()
riscv: Avoid fortify warning in syscall_get_arguments()
riscv: Provide all alternative macros all the time
riscv: module: Allocate PLT entries for R_RISCV_PLT32
riscv: module: Fix out-of-bounds relocation access
riscv: Properly export reserved regions in /proc/iomem
riscv: Fix unaligned access info messages
riscv: Avoid fortify warning in syscall_get_arguments()
Documentation: riscv: Fix typo MIMPLID -> MIMPID
riscv: Use kvmalloc_array on relocation_hashtable
Add a pattern property for pcie-ctrl which can be part of this controller.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Change description and add example]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250402113201.151195-2-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
Attach ndm- to all members of struct nfmsg. We could possibly
use name-prefix just for C, but I don't think we have any precedent
for using name-prefix on structs, and other rtnetlink sub-specs
give full names for fixed header struct members.
Fixes: bc515ed066 ("netlink: specs: Add a spec for neighbor tables in rtnetlink")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull devicetree fixes from Rob Herring:
- A couple of maintainers updates
- Remove obsolete Renesas TPU timer binding
- Add i.MX94 support to nxp,sysctr-timer and fsl,irqsteer
- Add support for 'data-lanes' property in fsl,imx8mq-nwl-dsi binding
* tag 'devicetree-fixes-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: fsl: fsl,ls1028a-reset: Fix maintainer entry
dt-bindings: timer: renesas,tpu: remove obsolete binding
dt-bindings: timer: nxp,sysctr-timer: Add i.MX94 support
dt-bindings: interrupt-controller: fsl,irqsteer: Add i.MX94 support
dt-bindings: display: nwl-dsi: Allow 'data-lanes' property for port@1
dt-bindings: xilinx: Remove myself from maintainership
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac9: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
