In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the everest es7241 which is a simple 2 channels
analog to digital converter.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We are currently using power saving mode for button detection.
However, it will impact the headset recording performance.
This patch will switch button detection to normal mode in capture
and switch to power saving mode in the end of capture.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the VDD and AVDD power supplies to the DAPM graph as some board may
need to enable a regulator to turn them on.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For each supported sample rate, the es7134 can work with several
mclk / sample rate ratio. Check if ratio we get is actually OK.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
64Khz is actually not supported by the es7134 according to the datasheet
Fixes: 9000b59d7a ("ASoC: es7134: add es7134 DAC driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should
not be used anymore. In order to support PXA boards on DT platforms, remove
them and let the code figure out the correct dividers and PLL base
frequencies itself.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit d767d3ce5c ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97
components") created a build-time dependency to SND_PXA2XX_LIB but
missed to reflect that in Kconfig.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
use list_head for sub_dais,
since original sub_dais array is sparsely occupied
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This platform is no longer needed on DT boards, so let's remove them to
avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97)
directly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the functions are now available through pxa2xx-lib, hook them up
to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs
without a platform driver.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new()
and pxa2xx_pcm_ops in pxa2xx-lib.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the namespace a bit and drop the __ prefix of all functions
exported by pxa2xx-lib. This improves the readability of the code.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm
code only has a single user left. This patch folds the remaining bits into
its only user and removes the unnecessary glue layer along with its header
file.
The include dependency to linux/dma/pxa-dma.h is also gone now.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend dpcm_merge_chan to also check backend cpu dai channels
capabilities. Apply the same policy as soc_pcm_init_runtime_hw() for
multicodec links and only check cpu dai in this case.
Cc: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As it is, dpcm_runtime_update() performs the old path and new path
update of a frontend before going on to the next frontend DAI.
Depending the order of the FEs within the rtd list, the result of
the update might be different.
For example:
* Frontend A connected to backend C, with a 48kHz playback
* Frontend B connected to backend D, with a 44.1kHz playback
* FE A appears before FE B in the rtd list of the card.
If we reparent BE C to FE B (disconnecting BE D):
* old path update of FE A will run first, and BE C will get hw_free()
and shutdown()
* new path update of FE B will run after and BE C, which is stopped,
so it will be configured at 44.1kHz, as expected
If we reparent BE D to FE A (disconnecting BE C):
* new path update of FE A will run first but since BE D is still running
at 44.1kHz, it won't be reconfigured (no call to startup() or
hw_params())
* old path update of FE B runs after, nothing happens
* In this case, we end up with a BE playing at 44.1kHz a stream which is
supposed to be played at 48Khz (too slow)
To improve this situation, this patch performs all the FE old paths update
before going on to update the new paths. With this, the result should
no longer depend on the order of the FE within the card rtd list.
Please note that there might be a small performance penalty since
dpcm_process_paths() is called twice per stream direction.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the tas5707 to the available compatibles of the tas571x driver
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dio2125 is simple enough that we can make it a generic component.
Just rename and sed the dio2125 amplifier driver to simple_amplifier.
Suggested-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dio2125 is simple enough that we can make it a generic component.
Rename the the dio2125 documentation to simple-amplifier to
prepare this change.
Suggested-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As we get more entries in the DMI quirk table it is nice to have some
sort of ordering in the table, sort it alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
One some models (Chuwi Vi8 Plus, Chuwi Hi8 Pro) the headphone output has
left and right swapped. This can be fixed in with special mixer settings
in the UCM profile, bit this requires these devices loading a different
UCM profile.
This commit adds a BYT_RT5651_HP_LR_SWAPPED quirk for this and postfixes
the longname with "-hp-swapped" if set, so that a different UCM profile
will be loaded.
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the headset-mic is always IN3 there is no reason to have
the headset-mic mapping in the long-name.
This commit simplifies the long name to "bytcr-rt5651-<intmic-map>-mic".
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
