BRDS - Bluetooth Regulatory Domain Specific absorption rate
Bluetooth has regulatory limitations which prohibit or allow usage of certain
bands or channels as well as limiting Tx power. The Tx power values can be
configured in ACPI table. This patch reads from ACPI entry configures the
controller accordingly.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ensure interrupts are not re-enabled when the IRQ handler has already been
removed. This prevents unexpected IRQ handler execution due to stale or
unhandled interrupts.
Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists
before calling sdio_writel to enable interrupts.
Co-developed-by: Pedro Tsai <pedro.tsai@mediatek.com>
Signed-off-by: Pedro Tsai <pedro.tsai@mediatek.com>
Co-developed-by: Felix Freimann <felix.freimann@mediatek.com>
Signed-off-by: Felix Freimann <felix.freimann@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the resetting step before downloading the fw, as it may cause
other usb devices to fail to initialise when connected during boot
on kernels 6.11 and newer.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support TX timestamping in SCO sockets.
Not available for hdevs without SCO_FLOWCTL.
Support MSG_ERRQUEUE in SCO recvmsg.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support TX timestamping in L2CAP sockets.
Support MSG_ERRQUEUE recvmsg.
For other than SOCK_STREAM L2CAP sockets, if a packet from sendmsg() is
fragmented, only the first ACL fragment is timestamped.
For SOCK_STREAM L2CAP sockets, use the bytestream convention and
timestamp the last fragment and count bytes in tskey.
Timestamps are not generated in the Enhanced Retransmission mode, as
meaning of COMPLETION stamp is unclear if L2CAP layer retransmits.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_SCM_ERROR socket CMSG type.
Support TX timestamping in ISO sockets.
Support MSG_ERRQUEUE in ISO recvmsg.
If a packet from sendmsg() is fragmented, only the first ACL fragment is
timestamped.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This sets HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED which indicates that
controllers created by vhci driver support Sync Flow Control.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following warning:
drivers/bluetooth/btintel_pcie.c:695:20: warning: unused function 'btintel_pcie_in_rom' [-Wunused-function]
695 | static inline bool btintel_pcie_in_rom(struct btintel_pcie_data *data)
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for setting BD address during hci registration. NXP
FW does not allow vendor commands unless it receives a reset command
after FW download and initialization done.
As a workaround, the .set_bdaddr callback function will first send the
HCI reset command, followed by the actual vendor command to set BD
address.
The driver checks for the local-bd-address property in device tree, and
if preset, it sets the HCI_QUIRK_USE_BDADDR_PROPERTY quirk.
With this quirk set, the driver's set_bdaddr callback function is called
after FW download is complete and before HCI initialization, which sends
the hci reset and 3f 22 commands. During initialization, kernel reads
the newly set BD address from the controller.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no>
Signed-off-by: Kristian Krohn <kristian.krohn@remarkable.no>
Tested-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for Bluetooth Coredump feature to BTNXPUART driver to
collect FW dumps on demand, or in case FW goes in a bad state.
To trigger manual FW dump, following command can be used:
echo 1 > /sys/class/bluetooth/hci0/device/coredump
Once FW dump is complete, it can be written to a file:
cat /sys/class/bluetooth/hci0/devcoredump/data > fw_dump
While FW dump is in progress, any HCI command will return -EBUSY.
After FW dump is complete, driver will give HCI_NXP_IND_RESET command
which soft-resets the chip, allowing FW re-download.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves change baudrate and power save vendor commands from
nxp_setup() to nxp_post_init().
This also moves the baudrate restore logic from nxp_serdev_remove() to
nxp_shutdown() which ensure baudrate is restored even when HCI dev is
down, preventing baudrate mismatch between host and controller when
device is probed again next time.
In case of removal when the hdev is up and running, we have to call the
shutdown procedure explicitly before unregistering the hdev.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set HCI_READ_VOICE_SETTING and HCI_READ_PAGE_SCAN_TYPE as broken.
Once the min/max length of the commands began to be asserted, these fake
controllers can no longer be initialized because they return a smaller
report for these commands.
This affects various fake controllers reusing the 0A12:0001 VID/PID.
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A SCO connection without the proper voice_setting can cause
the controller to lock up.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On hardware error, controller writes hardware error event and optional
vendor specific hci events in device memory in TLV format and raises
MSIX interrupt. Driver reads the device memory and passes the events to
the stack for further processing.
Co-developed-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch allocates the host memory which is used by controller to dump
the firmware traces. The memory needs to be shared with controller via
context information.
Co-developed-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It
requires different firmware files and has different current
requirements, so add it as a separate SoC type.
The firmware for these chips has been recently added to the
linux-firmware repository and will be a part of the upcoming release:
- qca/cmbtfw12.tlv
- qca/cmbtfw13.tlv
- qca/cmnv12.bin
- qca/cmnv13.bin
- qca/cmnv13s.bin
- qca/cmnv13t.bin
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The WCN399x code has two separate cases for loading the NVM data. In
preparation to adding support for WCN3950, which also requires similar
quirk, split the "variant" to be specified explicitly and merge two
snprintfs into a single one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
WCN3950 is another member of the WiFi/BT WCN39xx family of the chips. It
requires different firmware, so document it as a new compat string.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
NXP bluetooth controller may have GPIO pins used and routed for `WAKE_IN`
and `WAKE_OUT`, such pin info must be known so that the driver is can
configure the controller's firmware accordingly.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When using the out-of-band WAKE_IN and WAKE_OUT pins, we have to tell
the firmware which pins to use (from controller point of view). This
allows to report remote wakeup support when WAKE_OUT(c2h) is configured.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Older boards are having entry "enable-gpios" in dts, we can safely assume
latest boards which are supporting PMU node enrty will support power
sequencer.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'hci_register_dev()' calls power up function, which is executed by
kworker - 'hci_power_on()'. This function does access to bluetooth chip
using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'.
Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and
if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after
'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will
be executed before setting this bit. In that case HCI init logic fails.
Patch moves setting of 'HCI_UART_PROTO_READY' before calling function
'hci_uart_register_dev()'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add DSBR support for Scorpious Peak cores.
Refer commit eb9e749c01 ("Bluetooth: btintel: Allow configuring drive
strength of BRI") for details about DSBR.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Output of checkpatch shows warning:
drivers/bluetooth/bfusb.c:368: WARNING: braces {} are not necessary
for single statement blocks
Remove braces for single line statement.
Signed-off-by: Jeremy Clifton <deaner92@yahoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_pending_find_data() last use was removed in 2021 by
commit 5a75013746 ("Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFO")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are
extracted from Windows driver inf file for various types of
WoS (Windows on Snapdragon) laptop.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the error code to the message "Failed to claim iso
interface". That allows us to know which error case
usb_driver_claim_interface() hit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some field descriptions were missing, some were not very accurate.
Not touching the uAPI header or .c files for now.
Formatting of those comments isn't great in general, but at least
they are not missing anything now.
Before:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
16
After:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
0
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250320224431.252489-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
