When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.
[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.
There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.
[How]
Check the clocks != 0 instead of the actual clocks.
Fixes: 9ed9203c3e ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Do the maths in celsius degree. This can fix the issues caused
by the changes below:
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
When system enters s3/s0i3, backlight PWM would set user level.
[How]
ABM disable function add keep current gain to avoid it.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.
[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.
[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.
In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.
Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.
[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.
Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.
With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.
Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1),
the caller should check error using DC_OK instead of checking against 0
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kvaddr element of the exynos_gem object points to a memory buffer, thus
it should not have a __iomem annotation. Then, to avoid a warning or
casting on assignment to fbi structure, the screen_buffer element of the
union should be used instead of the screen_base.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The drm scheduler currently expects that the stop/start sequence is always
executed in the timeout handling, as the job at the head of the hardware
execution list is always removed from the ring mirror before the driver
function is called and only inserted back into the list when starting the
scheduler.
This adds some unnecessary overhead if the timeout handler determines
that the GPU is still executing jobs normally and just wished to extend
the timeout, but a better solution requires a major rearchitecture of the
scheduler, which is not applicable as a fix.
Fixes: 135517d356 ("drm/scheduler: Avoid accessing freed bad job.")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
It looks like that this GPU core triggers an abort when
reading VIVS_HI_CHIP_PRODUCT_ID and/or VIVS_HI_CHIP_ECO_ID.
I looked at different versions of Vivante's kernel driver and did
not found anything about this issue or what feature flag can be
used. So go the simplest route and do not read these two registers
on the affected GPU core.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reported-by: Josua Mayer <josua.mayer@jm0.eu>
Fixes: 815e45bbd4 ("drm/etnaviv: determine product, customer and eco id")
Cc: stable@vger.kernel.org
Tested-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Pull EFI fixes from Thomas Gleixner:
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: efi: remove description of efi=old_map
efi/x86: Move 32-bit code into efi_32.c
efi/libstub: Handle unterminated cmdline
efi/libstub: Handle NULL cmdline
efi/libstub: Stop parsing arguments at "--"
efi: add missed destroy_workqueue when efisubsys_init fails
efi/x86: Mark kernel rodata non-executable for mixed mode
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The patch reorganizing the set_freq function made it so the gmu resume
doesn't always set the frequency, because a6xx_gmu_set_freq() exits early
when the frequency hasn't been changed. Note this always happens when
resuming GMU after recovering from a hang.
Use a simple workaround to prevent this from happening.
Fixes: 1f60d11423 ("drm: msm: a6xx: send opp instead of a frequency")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
For production devices, the debugbus sections will typically be fused
off and empty in the gpu device coredump. But since this may contain
data like cache contents, don't capture it by default.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
New Qualcomm firmware has changed a way it reports back the 'started'
event. Support new register values.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
Pull s390 fixes from Vasily Gorbik:
- a couple of fixes for storage key handling relevant for debugging
- add cond_resched into potentially slow subchannels scanning loop
- fixes for PF/VF linking and to ignore stale PCI configuration request
events
* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix PF/VF linking on hot plug
s390/pci: re-introduce zpci_remove_device()
s390/pci: fix zpci_bus_link_virtfn()
s390/ptrace: fix storage key handling
s390/runtime_instrumentation: fix storage key handling
s390/pci: ignore stale configuration request event
s390/cio: add cond_resched() in the slow_eval_known_fn() loop
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
