Propagate return values from __v4l2_ctrl_modify_range() and
__v4l2_ctrl_s_ctrl() in imx219_set_ctrl() and imx219_set_pad_format().
This ensures proper error handling instead of ignoring possible
failures. Also return the result of imx219_set_pad_format() from
imx219_init_state().
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for monochrome media bus formats, for use with monochrome/IR
camera sensors.
This has been tested on a Dell XPS 13 9320 with OV1A1B IR sensor.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Smatch is confused by the control initialization logic. It assumes that
there can be a case where imx214->link_freq can be NULL and ctrls_init
returns 0.
Re-arrange the function to make smatch happy.
This patch fixes this smatch error:
drivers/media/i2c/imx214.c:1109 imx214_ctrls_init() error: we previously assumed 'imx214->link_freq' could be null (see line 1017)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Call on v4l2_get_active_data_lanes() to check if the driver reports that
the number of lanes actively used by the MIPI CSI transmitter differs to
the maximum defined in device tree.
If the number of active data lanes reported by the driver is invalid,
catch and return the error. If the operation is not supported, fall back
to the number of allowed data lanes.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the num_data_lanes field to the mipi_csis_device struct, and set it
equal to csis->bus.num_data_lanes. This is in preparation to support
cases when the data lanes actively used differs from the maximum
supported data lanes.
No functional changes intended by this commit.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sometimes, users will not use all of the MIPI CSI 2 lanes available when
connecting to the MIPI CSI receiver of their device. Add a helper
function that checks the mbus_config for the device driver to allow
users to define the number of active data lanes through the
get_mbus_config op.
If the driver does not implement this op, fall back to using the maximum
number of lanes available.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Introduce 2x2 binning mode (1312x972@60fps). Since there are multiple
modes now, use v4l2_find_nearest_size() to select the appropriate mode
in .set_fmt().
For 2x2 binning the minimum shutter value supported is 17 instead of 9.
This effects the maximum allowed exposure time, and if not enforced then
the sensor produces very dark frames when the minimum shutter limit is
violated.
Lastly, update the crop size reported to the userspace. When trying 2x2
binning with the datasheet suggested pixel array size (i.e. 2592 / 2 =>
1296), on some platforms (Raspberry Pi 5) artefacts are introduced on
the right edge of the output image. Instead, using a higher width of
1312 works fine on all platforms.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
While switching modes, updating to a different value of HBLANK isn't
sufficient, as this is a read-only control with a single allowed value,
and thus hblank_min == hblank_max == hblank of the default mode.
So to correctly update the user-facing value of the HBLANK parameter,
which is necessary for correct framerate calculation, update the whole
range when switching modes.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Support vertical flip by setting REG_VREVERSE.
Additional registers also needs to be set per mode, according
to the readout direction (normal/inverted) as mentioned in the
data sheet.
Since the register IMX335_REG_AREA3_ST_ADR_1 is based on the
flip (and is set via vflip related registers), it has been
moved out of the 2592x1944 mode regs.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Linux 6.18-rc5
* tag 'v6.18-rc5': (1016 commits)
Linux 6.18-rc5
kbuild: Let kernel-doc.py use PYTHON3 override
rtc: rx8025: fix incorrect register reference
Revert "drm/nouveau: set DMA mask before creating the flush page"
io_uring: fix regbuf vector size truncation
compiler_types: Move unused static inline functions warning to W=2
smb: client: validate change notify buffer before copy
tracing/tools: Fix incorrcet short option in usage text for --threads
drm/xe: Enforce correct user fence signaling order using
x86/microcode/AMD: Add more known models to entry sign checking
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
gpio: tb10x: Drop unused tb10x_set_bits() function
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
...
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.
Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.
Fixes: a4b80242d0 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull i2c fix from Wolfram Sang:
"Two reverts merged into one commit to handle a regression caused by a
wrong cleanup because the underlying implications were unclear"
* tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: pca954x: Fix broken reset-gpio usage
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull drm fix from Dave Airlie:
"Brown paper bag, the dma mask fix which I applied and actually looked
through for bad things, actually broke newer GPUs, there might be some
latent part in the boot path that is assuming 32-bit still, but we
will figure that out elsewhere.
nouveau:
- revert DMA mask change"
* tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau: set DMA mask before creating the flush page"
Pull x86 fixes from Ingo Molnar:
- Fix AMD PCI root device caching regression that triggers
on certain firmware variants
- Fix the zen5_rdseed_microcode[] array to be NULL-terminated
- Add more AMD models to microcode signature checking
* tag 'x86-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add more known models to entry sign checking
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
x86/amd_node: Fix AMD root device caching
Pull scheduler fix from Ingo Molnar:
"Fix a group-throttling bug in the fair scheduler"
* tag 'sched-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Prevent cfs_rq from being unthrottled with zero runtime_remaining
Pull perf event fix from Ingo Molnar:
"Fix a system hang caused by cpu-clock events deadlock"
* tag 'perf-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix system hang caused by cpu-clock usage
Pull locking fix from Ingo Molnar:
"Fix (well, cut in half) a futex performance regression on PowerPC"
* tag 'locking-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Optimize per-cpu reference counting
Pull io_uring fix from Jens Axboe:
"Single fix in there, fixing an overflow in calculating the needed
segments for converting into a bvec array"
* tag 'io_uring-6.18-20251107' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix regbuf vector size truncation
Pull xfs fixes from Carlos Maiolino:
"This contain fixes for the RT and zoned allocator, and a few fixes for
atomic writes"
* tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: free xfs_busy_extents structure when no RT extents are queued
xfs: fix zone selection in xfs_select_open_zone_mru
xfs: fix a rtgroup leak when xfs_init_zone fails
xfs: fix various problems in xfs_atomic_write_cow_iomap_begin
xfs: fix delalloc write failures in software-provided atomic writes
This reverts commit ebe7556050.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
Pull parisc fix from Helge Deller:
- fix crash triggered by unaligned access in parisc unwinder
* tag 'parisc-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid crash due to unaligned access in unwinder
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
Pull slab fix from Vlastimil Babka:
- Fix for potential infinite loop in kmalloc_nolock() when debugging
is enabled for the cache (Vlastimil Babka)
* tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: prevent infinite loop in kmalloc_nolock() with debugging
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
