Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-18-tzimmermann@suse.de
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.
The driver uses a mixture of DMA helpers and deferred I/O. That
probably needs fixing by a driver maintainer.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-14-tzimmermann@suse.de
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Robin van der Gracht <robin@protonic.nl>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Robin van der Gracht <robin@protonic.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-11-tzimmermann@suse.de
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-9-tzimmermann@suse.de
Implement the driver's fops with the generator macros for deferred
I/O. Only requires per-driver code for the on-scren scanout buffer.
The generated helpers implement reading, writing and drawing on top
of that. Also update the selected Kconfig tokens accordingly.
Actual support for deferred I/O is missing from the driver. So
writing to memory-mapped pages does not automatically update the
scanout buffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jaya Kumar <jayalk@intworks.biz>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-7-tzimmermann@suse.de
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-5-tzimmermann@suse.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
There is one error path in tilcdc_pdev_remove() that potentially could
yield a non-zero return code. In this case an error message describing
the failure is emitted now instead of
remove callback returned a non-zero value. This will be ignored.
before. Otherwise there is no difference. Also note that currently
tilcdc_get_external_components() doesn't return negative values.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-34-u.kleine-koenig@pengutronix.de
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Detect device type and config mode in the PCI probe helper, but leave
DRM device initialization where it is. Structures the driver probe and
setup code into a detection and an initialization phase.
A later patch can add branching to the device-initialization code. Each
chip type can have it own initializer function, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
There are three different ways of retrieving the I/O-memory ranges
for AST devices: either from PCI BAR 1, from PCI BAR 2 or from PCI
BAR 1 by 'guessing'.
Make the respective code more readable by making each case self-
contained. Also add error checking against the length of the PCI
BARs.
v2:
* fix I/O range length to 128 bytes
* fix length test for PCI BAR 2
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-3-tzimmermann@suse.de
The lock for the I/O registers is only relevant during mode-setting
operations. It protects the registers from concurrent access from
reading EDID information.
Reduce lock coverage to mode setting, rename the lock and move it
entirely into the mode-setting code. No functional changes, as the
I/O lock was never used for anything else than mode setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-2-tzimmermann@suse.de
Backmerging to get commit 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The driver specific reference count indicates whether the VM should be
teared down, whereas GPUVM's reference count indicates whether the VM
structure can finally be freed.
Hence, free the VM structure in pvr_gpuvm_free() and drop the last
GPUVM reference after tearing down the VM. Generally, this prevents
lifetime issues such as the VM being freed as long as drm_gpuvm_bo
structures still hold references to the VM.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Tested-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124233650.152653-4-dakr@redhat.com
Use drm_gpuvm_bo_obtain() instead of drm_gpuvm_bo_create(). The latter
should only be used in conjunction with drm_gpuvm_bo_obtain_prealloc().
drm_gpuvm_bo_obtain() re-uses existing instances of a given VM and BO
combination, whereas drm_gpuvm_bo_create() would always create a new
instance of struct drm_gpuvm_bo and hence leave us with duplicates.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Tested-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124233650.152653-2-dakr@redhat.com
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") for further ast work in -next.
Minor conflicts in ivpu between 3de6d95978 ("accel/ivpu: Pass D0i3
residency time to the VPU firmware") and 3f7c063492
("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent
lines.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Try to allocate system memory on the NUMA node the device is closest to
and try to run delayed_delete workers on a CPU of this node as well.
To optimize the memory clearing operation when a TTM BO gets freed by
the delayed_delete worker, scheduling it closer to a NUMA node where the
memory was initially allocated helps avoid the cases where the worker
gets randomly scheduled on the CPU cores that are across interconnect
boundaries such as xGMI, PCIe etc.
This change helps USWC GTT allocations on NUMA systems (dGPU) and AMD
APU platforms such as GFXIP9.4.3.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231111130856.1168304-1-rajneesh.bhardwaj@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
