Moving sram code from plat-omap got the attention of the kernel test robot.
I found a few more places with related warnings because the sram
references are a mix of kernel pointers and __iomem pointers:
mach-omap1/sram-init.c:56:17: warning: cast removes address space '__iomem' of expression
mach-omap1/board-ams-delta.c:667:9: warning: incorrect type in argument 1 (different base types)
mach-omap2/sram.c:78:17: warning: cast removes address space '__iomem' of expression
mach-omap2/omap4-common.c:142:27: warning: incorrect type in assignment (different address spaces)
mach-omap2/omap4-common.c:142:27: expected void [noderef] __iomem *static [toplevel] sram_sync
mach-omap2/omap4-common.c:142:27: got void *
mach-omap2/pm34xx.c:113:45: warning: incorrect type in argument 1 (different address spaces)
mach-omap2/pm34xx.c:113:45: expected void [noderef] __iomem *save_regs
mach-omap2/pm34xx.c:113:45: got void *extern [addressable] [toplevel] omap3_secure_ram_storage
There is no good solution here, as sram is a bit special in this
regard. Change the annotations to at least shut up the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two of the remaining four headers are never used, the other
two are only used inside of the platform code. Move them
next to the files that include them and remove the
Makefile trick that adds the include path.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The files in include/mach are only used from mach/davinci,
so they are no longer needed in the traditional location.
Move them to arch/arm/mach-davinci/ and drop the logic for
the special include path.
The mach/uncompress.h file is not used at all and can just
be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mach/serial.h is only included from arch/arm/mach-omap2/serial.h,
and the other two files are unused and empty.
Remove the directory by relocating the contents of mach/serial.h
and dropping all other references.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ap_init_early function is defined a global but has no declaration,
so it produces a warning:
arch/arm/mach-versatile/integrator_ap.c:148:13: warning: no previous prototype for 'ap_init_early' [-Wmissing-prototypes
The function could be made 'static' but since it's empty, we can
just remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the full series for converting OMAP1 to multiplatform, rebased
from my 2019 attempt to do the same thing. The soc tree contains simpler
patches to do the same for iop32x, ixp4xx, ep93xx and s3c24xx, which
means we are getting closer to completing this for all ARMv5 platforms
(I have patches for PXA, which is the last one remaining).
Janusz already tested the branch separately and did the missing work
for the common-clk conversion after my previous approach was broken.
Aaro found one regression during additional testing, this is fixed now.
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The include directory is gone, so stop passing the command line flag.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Janusz has been active with improving and testing the omap1 SoC support
and has been recently working on adding support for the common clock
framework.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some OMAP1 clock code bits that have no effect:
- crystal_type variable is set to 0 but never changed, then
crystal_type == 2 condition is never true and ck_ref.rate never set to
19200000,
- clk->ops->allow_idle() is called from omap_clk_enable_autoidle_all() but
that op is not configured for any clock, then the function does nothing
and the op field is not needed,
- ENABLE_ON_INIT flag is set for some clocks but is never checked by any
code, then not needed.
Drop that code.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The code of OMAP1 clocks contains quite a few unused elements:
- functions and function like macros never called: clk_reparent(),
recalculate_root_clocks(), clk_enable_init_clocks(),
omap_clk_get_by_name(), omap_clk_disable_autoidle_all(),
__clk_get_parent(clk), __clk_get_rate(),
- unused structure fields:
- clkops: .find_idlest(), .find_companion(), .deny_idle(),
- clk: .src_offset, as well as .clkdm -- no longer present but still
mentioned in comments,
- definitions of unused flags: INVERT_ENABLE, CLOCK_CLKOUTX2,
- definitions of unused data types: struct clk_functions,
- prototypes of functions with no implementation: clk_init(),
omap1_watchdog_recalc().
- declarations of never defined global variables: clkops_dummy.
Drop them.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number. Fix it.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit ef772f2ee3 ("ARM: OMAP: Fix CONFIG_DEBUG_LL") was supposed to fix
low level debugging, most possibly by early enabling UART clocks. The fix
actually introduced early reset of most bits of MOD_CONF_CTRL_0 register,
with the exception of UART1 and UART2 clock related bits which were set
high. However, UART1 clock bit can play different roles on different
OMAP1 variants. On OMAP1610 it enables the clock as intended, but on
OMAP1510 it switches the clock rate from 12 to 48 MHz. Even worth, for
UART2 the bit changes its clock rate also on OMAP1610. As a result, UART
rates set by a bootloader can be unintentionally changed early on kernel
boot and low level debugging broken, not fixed. Besides, reset of all
other bits was not justified.
Don't touch register bits not related to UART clocks. Also, don't touch
the bit of UART2 clock. Make sure UART1 and UART3 are enabled early on
relevant OMAP1610 machine types while preserving bootloader UART clock
rates on others.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation for conversion of OMAP1 clocks to common clock framework,
identify arch/arm/mach-omap1 local users of those clocks and update them
to call clk_prepare_enable/clk_disable_unprepare() instead of just
clk_enable/disable(), as required by CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a multiplatform randconfig kernel, one can have
CONFIG_ARCH_OMAP1 enabled, but none of the specific SoCs.
This leads to some build issues as the code is not
meant to deal with this configuration at the moment:
arch/arm/mach-omap1/io.c:86:20: error: unused function 'omap1_map_common_io' [-Werror,-Wunused-function]
arch/arm/mach-omap1/pm.h:113:2: error: "Power management for this processor not implemented yet" [-Werror,-W#warnings]
Use the same trick as on OMAP2 and guard the actual compilation
of platform code with another Makefile ifdef check based
on an option that depends on having at least one SoC enabled.
The io.c file still needs to get compiled to allow building
device drivers with a dependency on CONFIG_ARCH_OMAP1.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the header files are no longer referenced from outside
arch/arm/mach-omap1, so move them all to that place directly
and change their users to use the new location.
The exceptions are:
- mach/compress.h is used by the core architecture code
- mach/serial.h is used by mach/compress.h
The mach/memory.h is empty and gets removed in the process,
avoiding the need for CONFIG_NEED_MACH_MEMORY_H.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ISA I/O space handling in omap_cf is incompatible with
PCI drivers in a multiplatform kernel, and requires a custom
mach/io.h.
Change the driver to use pci_remap_iospace() like PCI drivers do,
so the generic ioport access can work across platforms.
To actually use that code, we have to select CONFIG_PCI
here.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The address range 0xfee00000-0xfeffffff is used for PCI and
PCMCIA I/O port mappings, but OMAP1 has its static mappings
there as well.
Move the OMAP1 addresses a little higher to avoid crashing
at boot.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The last file in this directory is gone, and it can be removed as well.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sram initialization code is the only shared omap1/2 code that
is not a standalone driver, but it is very short. Having two copies
of this code means some duplication of the sources, but actually
saves object code size as it can be inlined better.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All the remaining features in here are either omap1
or omap2plus specific, so move them into the respective
Kconfig files.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the interface functions in plat/dma.c are only used from the
USB driver, which is practically OMAP1 specific, except for compile
testing.
The omap_get_plat_info(), omap_request_dma() and omap_free_dma()
functions are never called on omap2 because of runtime checks.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No part of plat-omap/dma.c is called on omap2 any more, so
anything omap2 specific in here can simply be removed.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The legacy interface for omap-dma is only used on OMAP1, and the
same is true for the non-DT case. Make both of these conditional on
CONFIG_ARCH_OMAP1 being set to simplify the dependency.
The non-OMAP stub functions in include/linux/omap-dma.h are note needed
any more either now, because they are only called on OMAP1.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Samsung S3C24xx and S3C64xx platforms are very old designs. S3C2416
was introduced in 2008 and S3C6410 in 2009/2010. They are not widely
available anymore - out-of-stock on FriendlyArm (one of manufacturers of
boards) and only few specialist stores still offer them for quite a high
price.
The community around these platforms was not very active, so I suspect
no one really uses them anymore. Maintenance takes precious time so
there is little sense in keeping them alive if there are no real users.
Let's mark all S3C24xx and S3C64xx platforms as deprecated and mention
possible removal in after 2022 for the first and 2024 for the lattere.
The deprecation message will be as text in Kconfig, build message (not a
warning though) and runtime print error.
If there are any users, they might respond and postpone the removal.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220407072319.75614-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the plat-omap/dma.c code is specific to the USB
driver. Hide that code when it is not in use, to make it
clearer which parts are actually still required.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It has been impossible to select this driver for six years
without anyone noticing, so just kill it completely.
Fixes: 54ea18e886 ("ARM: OMAP2+: Remove board file for H4")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
omap2 stopped using this code with commit 8d39ff3d16 ("ARM: OMAP2+:
Remove unused legacy code for timer"), so just move it to mach-omap1 now,
along with the other half of that driver.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The innovator board needs a special case for its phy control.
Move the corresponding code into the board file and out of the
common code by adding another callback.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omap-keypad driver currently relies on including mach/memory.h
implicitly, but that won't happen once omap1 is converted to
CONFIG_ARCH_MULTIPLATFORM. Include the required header
explicitly.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As a preparation for cleaning up the omap1 headers, start
including linux/soc/ti/omap1-soc.h directly so we can
keep calling cpu_is_omap1510().
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As a preparation for future omap1 multiplatform support, stop
using mach/hardware.h and instead include the omap1-io.h
for low-level register access to MOD_CONF_CTRL_1.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omap usb drivers still rely on mach/*.h headers that
are explicitly or implicitly included, but all the required
definitions are now in include/linux/soc/ti/, so use those
instead and allow compile-testing on other architectures.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All the headers we actually need are now in include/linux/soc,
so use those versions instead and allow compile-testing on
other architectures.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver has always had a FIXME about this, and it seems
like this trivial code move avoids a mach header inclusion,
so just do it.
With that out of the way, and the header file inclusions
changed to global files, the driver can also be compile-tested
on other platforms.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three remaining header files that are used by omap1
specific device drivers:
- mach/soc.h provides cpu_is_omapXXX abstractions
- mach/hardware.h provides omap_read/omap_write functions
and physical addresses
- mach/mux.h provides an omap specific pinctrl abstraction
This is generally not how we do platform abstractions today,
and it would be good to completely get rid of these in favor
of passing information through platform devices and the pinctrl
subsystem.
However, given that nobody is working on that, just move it
one step forward by splitting out the header files that are
used by drivers today from the machine headers that are only
used internally.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The obsolete camera support was removed, but a few lines remain in this
file and cause a warning:
arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: 'ams_delta_camera_power' defined but not used [-Wunused-function]
462 | static int ams_delta_camera_power(struct device *dev, int power)
Remove this and all related lines as well.
Fixes: ce548396a4 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid relying on the mach/irqs.h header, stop using
OMAP_LCDC_IRQ and INT_1610_SoSSI_MATCH directly in the driver
code, but instead pass these as resources.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
omapfb calls directly into the omap_set_dma_priority() function in
the DMA driver. This prevents compile-testing omapfb on other
architectures. Add an inline function next to the other ones
for non-omap configurations.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omapfb driver is split into platform specific code for omap1, and
driver code that is also specific to omap1.
Moving both parts into the driver directory simplifies the structure
and avoids the dependency on certain omap machine header files.
As mach/lcd_dma.h can not be included from include/linux/omap-dma.h
any more now, move the omap_lcd_dma_running() declaration into the
omap-dma header, which matches where it is defined.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid using the mach/omap1510.h header file, pass the correct
address as platform data.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent cleanup patch removed the only reference to a local variable
in some configurations.
Move the variable into the one block it is still used in, inside
of an #ifdef, to avoid this warning.
Fixes: 9d773f103b ("video: fbdev: omapfb: lcd_ams_delta: Make use of the helper function dev_err_probe()")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After all the work that Linus Walleij did on this platform, it can be
part of a generic kernel build as well.
Note that there are known bugs in little-endian mode on ixp4xx, and
no other ARMv5 platform at this point supports big-endian mode, or is
likely to in the future, so there is limited practical value in this,
but it helps with build testing and ixp4xx little-endian support may
get fixed in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Choosing big-endian vs little-endian kernels in Kconfig has not worked
correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long
time ago.
The problems is that CONFIG_BIG_ENDIAN depends on
ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform
in the config, but would actually have to be supported by all
of them.
This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and
tend to just work aside from problems in nonportable device drivers.
For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM
were never set together, so this was disabled on all those machines
except for IXP4xx.
As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to
formalize this logic: all ARMv4/v5 platforms get an explicit dependency
on being either big-endian (ixp4xx) or little-endian (the rest). We may
want to fix ixp4xx in the future to support both, but it does not work
in LE mode at the moment.
For the ARMv6/v7 platforms, there are two ways this could be handled
a) allow both modes only for platforms selecting
'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the
others, given that these were added intentionally at some
point.
b) allow both modes everwhere, given that it was already possible
to build that way by e.g. selecting ARCH_VIRT, and that the
list is not an accurate reflection of which platforms may or
may not work.
Out of these, I picked b) because it seemed slighly more logical
to me.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After iop32x was converted to the generic multi-irq entry
code, nothing really stops us from building it into a
generic kernel.
The two last headers can simply be removed, the mach/irqs.h
gets replaced with the sparse-irq intiialization from the
board specific .nr_irqs value, and the decompressor debug
output can use the debug_ll hack that all other platforms
use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the custom ISA I/O and the missing sparse-irq support
out of the way, s3c24xx can now be built into the same
kernel as all other ARM9 based platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As a final bit of preparation for converting to ARCH_MULTIPLATFORM,
change the interrupt handling for s3c24xx to use sparse IRQs.
Since the number of possible interrupts is already fixed and relatively
small per chip, just make it use all legacy interrupts preallocated
using the .nr_irqs field in the machine descriptor, rather than actually
allocating domains on the fly.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
