When the link partner goes down, "ethtool --show-mm" still displays
"Verification status: SUCCEEDED," reflecting a previous state that is
no longer valid.
Reset the verification status to ensure it reflects the current state.
Reviewed-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It appears that stmmac is not the only hardware which requires a
software-driven verification state machine for the MAC Merge layer.
While on the one hand it's good to encourage hardware implementations,
on the other hand it's quite difficult to tolerate multiple drivers
implementing independently fairly non-trivial logic.
Extract the hardware-independent logic from stmmac into library code and
put it in ethtool. Name the state structure "mmsv" for MAC Merge
Software Verification. Let this expose an operations structure for
executing the hardware stuff: sync hardware with the tx_active boolean
(result of verification process), enable/disable the pMAC, send mPackets,
notify library of external events (reception of mPackets), as well as
link state changes.
Note that it is assumed that the external events are received in hardirq
context. If they are not, it is probably a good idea to disable hardirqs
when calling ethtool_mmsv_event_handle(), because the library does not
do so.
Also, the MM software verification process has no business with the
tx_min_frag_size, that is all the driver's to handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The upcoming patch will extract verification logic into a new module,
MMSV (MAC Merge Software Verification). MMSV will handle most FPE fields,
except frag_size. It introduces its own lock (mmsv->lock), replacing
fpe_cfg->lock.
Since frag_size handling remains in the driver, the existing rtnl_lock()
is sufficient. Move frag_size handling out of spin_lock_irq_save() to keep
the upcoming patch a pure refactoring without behavior changes.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
fib_rule, ip6_tunnel, and a whole lot of if_* headers lack the customary
_UAPI in the header guard. Without it YNL build can't protect from in tree
and system headers both getting included. YNL doesn't need most of these
but it's annoying to have to fix them one by one.
Note that header installation strips this _UAPI prefix so this should
result in no change to the end user.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250416200840.1338195-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new GCC 15 warning -Wunterminated-string-initialization reports:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en.h:55,
from drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:34:
drivers/net/ethernet/mellanox/mlx5/core/en_stats.h:57:46: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
57 | #define MLX5E_DECLARE_PTP_RQ_STAT(type, fld) "ptp_rq%d_"#fld, offsetof(type, fld)
| ^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:2279:11: note: in expansion of macro 'MLX5E_DECLARE_PTP_RQ_STAT'
2279 | { MLX5E_DECLARE_PTP_RQ_STAT(struct mlx5e_rq_stats, csum_complete_tail_slow) },
| ^~~~~~~~~~~~~~~~~~~~~~~~~
This stat string is being used in ethtool_sprintf(), so it must be a
valid NUL-terminated string. Currently the string lacks the final NUL
byte (as GCC warns), but by absolute luck, the next byte in memory is a
space (decimal 32) followed by a NUL. "format" is immediately followed
by little-endian size_t:
struct counter_desc {
char format[32]; /* 0 32 */
size_t offset; /* 32 8 */
};
The "offset" member is populated by the stats member offset:
#define MLX5E_DECLARE_PTP_RQ_STAT(type, fld) "ptp_rq%d_"#fld, offsetof(type, fld)
which for this struct mlx5e_rq_stats member, csum_complete_tail_slow, is
32, or space, and then the rest of the "offset" bytes are NULs.
struct mlx5e_rq_stats {
...
u64 csum_complete_tail_slow; /* 32 8 */
The use of vsnprintf(), within ethtool_sprintf(), reads past the end of
"format" and sees the format string as "ptp_rq%d_csum_complete_tail_slow ",
with %d getting resolved by MLX5E_PTP_CHANNEL_IX (value 0):
ethtool_sprintf(data, ptp_rq_stats_desc[i].format,
MLX5E_PTP_CHANNEL_IX);
With an output result of "ptp_rq0_csum_complete_tail_slow", which gets
precisely truncated to 31 characters with a trailing NUL.
So, instead of accidentally getting this correct due to the NUL bytes
at the end of the size_t that happens to follow the format string, just
make the string initializer 1 byte shorter by replacing "%d" with "0",
since MLX5E_PTP_CHANNEL_IX is already hard-coded. This results in no
initializer truncation and no need to call sprintf().
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20250416020109.work.297-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many drivers populate the stats buffer using C-String based APIs (e.g.
ethtool_sprintf() and ethtool_puts()), usually when building up the
list of stats individually (i.e. with a for() loop). This, however,
requires that the source strings be populated in such a way as to have
a terminating NUL byte in the source.
Other drivers populate the stats buffer directly using one big memcpy()
of an entire array of strings. No NUL termination is needed here, as the
bytes are being directly passed through. Yet others will build up the
stats buffer individually, but also use memcpy(). This, too, does not
need NUL termination of the source strings.
However, there are cases where the strings that populate the
source stats strings are exactly ETH_GSTRING_LEN long, and GCC
15's -Wunterminated-string-initialization option complains that the
trailing NUL byte has been truncated. This situation is fine only if the
driver is using the memcpy() approach. If the C-String APIs are used,
the destination string name will have its final byte truncated by the
required trailing NUL byte applied by the C-string API.
For drivers that are already using memcpy() but have initializers that
truncate the NUL terminator, mark their source strings as __nonstring to
silence the GCC warnings.
For drivers that have initializers that truncate the NUL terminator and
are using the C-String APIs, switch to memcpy() to avoid destination
string truncation and mark their source strings as __nonstring to silence
the GCC warnings. (Also introduce ethtool_cpy() as a helper to make this
an easy replacement).
Specifically the following warnings were investigated and addressed:
../drivers/net/ethernet/chelsio/cxgb/cxgb2.c:364:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
364 | "TxFramesAbortedDueToXSCollisions",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:165:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
165 | { ENETC_PM_R1523X(0), "MAC rx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:190:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
190 | { ENETC_PM_T1523X(0), "MAC tx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/google/gve/gve_ethtool.c:76:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
76 | "adminq_dcfg_device_resources_cnt", "adminq_set_driver_parameter_cnt",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:117:53: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
117 | STMMAC_STAT(ptp_rx_msg_type_pdelay_follow_up),
| ^
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:46:12: note: in definition of macro 'STMMAC_STAT'
46 | { #m, sizeof_field(struct stmmac_extra_stats, m), \
| ^
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:328:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
328 | .str = "a_mac_control_frames_transmitted",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:340:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
340 | .str = "a_pause_mac_ctrl_frames_received",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250416010210.work.904-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: sunxi cleanups
This series cleans up the sunxi (sun7i) code in two ways:
1. it converts to use the new set_clk_tx_rate() method, even though
we don't use clk_tx_i. In doing so, I reformat the function to
read better, but with no changes to the code.
2. convert from stmmac_dvr_probe() to stmmac_pltfr_probe(), and then
to its devm variant, which allows code simplification.
====================
Link: https://patch.msgid.link/Z_5WT_jOBgubjWQg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using devm_stmmac_pltfr_probe() simplifies the probe function. This
will not only call plat_dat->init (sun7i_dwmac_init), but also
plat_dat->exit (sun7i_dwmac_exit) appropriately if stmmac_dvr_probe()
fails. This results in an overall simplification of the glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4fre-000nMr-FT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than open-coding the calls to sun7i_gmac_init() and
sun7i_gmac_exit() in the probe function, use stmmac_pltfr_probe()
which will automatically call the plat_dat->init() and plat_dat->exit()
methods appropriately. This simplifies the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4frZ-000nMl-BB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
Pull xen fix from Juergen Gross:
"Just a single fix for the Xen multicall driver avoiding a percpu
variable referencing initdata by its initializer"
* tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix multicall debug feature
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following batch contains one Netfilter fix for net:
1) conntrack offload bit is erroneously unset in a race scenario,
from Florian Westphal.
netfilter pull request 25-04-17
* tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix erronous removal of offload bit
====================
Link: https://patch.msgid.link/20250417102847.16640-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
* tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: vhci: Avoid needless snprintf() calls
Bluetooth: l2cap: Process valid commands in too long frame
====================
Link: https://patch.msgid.link/20250416210126.2034212-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peter Seiderer says:
====================
net: pktgen: fix checkpatch code style errors/warnings
Fix checkpatch detected code style errors/warnings detected in
the file net/core/pktgen.c (remaining checkpatch checks will be addressed
in a follow up patch set).
====================
Link: https://patch.msgid.link/20250415112916.113455-1-ps.report@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Iurman says:
====================
Mitigate double allocations in ioam6_iptunnel
Commit dce525185b ("net: ipv6: ioam6_iptunnel: mitigate 2-realloc
issue") fixed the double allocation issue in ioam6_iptunnel. However,
since commit 92191dd107 ("net: ipv6: fix dst ref loops in rpl, seg6
and ioam6 lwtunnels"), the fix was left incomplete. Because the cache is
now empty when the dst_entry is the same post transformation in order to
avoid a reference loop, the double reallocation is back for such cases
(e.g., inline mode) which are valid for IOAM. This patch provides a way
to detect such cases without having a reference loop in the cache, and
so to avoid the double reallocation issue for all cases again.
v1: https://lore.kernel.org/netdev/20250410152432.30246-1-justin.iurman@uliege.be/T/#t
====================
Link: https://patch.msgid.link/20250415112554.23823-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the dst_entry is the same post transformation (which is a valid use
case for IOAM), we don't add it to the cache to avoid a reference loop.
Instead, we use a "fake" dst_entry and add it to the cache as a signal.
When we read the cache, we compare it with our "fake" dst_entry and
therefore detect if we're in the special case.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Antonio Quartulli says:
====================
Introducing OpenVPN Data Channel Offload
Notable changes since v25:
* removed netdev notifier (was only used for our own devices)
* added .dellink implementation to address what was previously
done in notifier
* removed .ndo_open and moved netif_carrier_off() call to .ndo_init
* fixed author in MODULE_AUTHOR()
* properly indented checks in ovpn.yaml
* switched from TSTATS to DSTATS
* removed obsolete comment in ovpn_socket_new()
* removed unrelated hunk in ovpn_socket_new()
The latest code can also be found at:
https://github.com/OpenVPN/ovpn-net-next
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
====================
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-0-577f6097b964@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ovpn-cli tool can be compiled and used as selftest for the ovpn
kernel module.
[NOTE: it depends on libmedtls for decoding base64-encoded keys]
ovpn-cli implements the netlink and RTNL APIs and can thus be integrated
in any script for more automated testing.
Along with the tool, a bunch of scripts are provided that perform basic
functionality tests by means of network namespaces.
These scripts take part to the kselftest automation.
The output of the scripts, which will appear in the kselftest
reports, is a list of steps performed by the scripts plus some
output coming from the execution of `ping`, `iperf` and `ovpn-cli`
itself.
In general it is useful only in case of failure, in order to
understand which step has failed and why.
Please note: since peer sockets are tied to the userspace
process that created them (i.e. exiting the process will result
in closing the socket), every run of ovpn-cli that created
one will go to background and enter pause(), waiting for the
signal which will allow it to terminate.
Termination is accomplished at the end of each script by
issuing a killall command.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-23-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IV wrap-around is cryptographically dangerous for a number of ciphers,
therefore kill the key and inform userspace (via netlink) should the
IV space go exhausted.
Userspace has two ways of deciding when the key has to be renewed before
exhausting the IV space:
1) time based approach:
after X seconds/minutes userspace generates a new key and sends it
to the kernel. This is based on guestimate and normally default
timer value works well.
2) packet count based approach:
after X packets/bytes userspace generates a new key and sends it to
the kernel. Userspace keeps track of the amount of traffic by
periodically polling GET_PEER and fetching the VPN/LINK stats.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-20-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In a multi-peer scenario there are a number of situations when a
specific peer needs to be looked up.
We may want to lookup a peer by:
1. its ID
2. its VPN destination IP
3. its transport IP/port couple
For each of the above, there is a specific routing table referencing all
peers for fast look up.
Case 2. is a bit special in the sense that an outgoing packet may not be
sent to the peer VPN IP directly, but rather to a network behind it. For
this reason we first perform a nexthop lookup in the system routing
table and then we use the retrieved nexthop as peer search key.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-15-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
