Add a new function to consolidate the required compatibility pattern for
driver data of checking against a minimum size, and checking for unknown
trailing bytes to be zero into a function.
This new function uses the faster copy_struct_from_user() instead of
trying to directly check for zero.
Incorporate the common ibdev_dbg() logging directly into the error paths
of the helper.
Link: https://patch.msgid.link/r/3-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the VAR allocation UAPI to accept an optional flags attribute,
allowing userspace to request TLP VAR allocation via the
MLX5_IB_UAPI_VAR_ALLOC_FLAG_TLP flag.
When the TLP flag "MLX5_IB_UAPI_VAR_ALLOC_FLAG_TLP" is specified,
the driver selects the TLP VAR region for allocation instead of the
regular VirtIO VAR region.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add support for TLP (Transaction Layer Packet) VAR regions used by
software-defined device emulation. TLP VAR provides dedicated response
gateways for sending TLP responses back to the host in TLP emulation
scenarios.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Extract mlx5_var_region struct from mlx5_var_table to enable
supporting multiple VAR regions in VAR table, which will be used in
the upcoming patches (Virtio emulation VAR and TLP emulation VAR).
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This series adds support for Transaction Layer Packet (TLP) emulation
response gateway regions, enabling userspace device emulation software
to write TLP responses directly to lower layers without kernel driver
involvement.
Currently, the mlx5 driver exposes VirtIO emulation access regions via
the MLX5_IB_METHOD_VAR_OBJ_ALLOC ioctl. This series extends that
ioctl to also support allocating TLP response gateway channels for
PCI device emulation use cases.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce the hardware structures and definitions needed for the driver
support of TLP emulation in mlx5_ifc.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Allow users to set FRMR pools aging timer through netlink.
This functionality will allow user to control how long handles reside in
the kernel before being destroyed, thus being able to tune the tradeoff
between memory and HW object consumption and memory registration
optimization.
Since FRMR pools is highly beneficial for application restart scenarios,
this command allows users to modify the aging timer to their application
restart time, making sure the FRMR handles deregistered on application
teardown are kept for long enough in the pools for reuse in the
application startup.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-9-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use the new generic FRMR pools mechanism to optimize the performance of
memory registrations.
The move to the new generic FRMR pools will allow users configuring MR
cache through debugfs of MR cache to use the netlink API for FRMR pools
which will be added later in this series. Thus being able to have more
flexibility configuring the kernel and also being able to configure on
machines where debugfs is not available.
Mlx5_ib will save the mkey index as the handle in FRMR pools, same as the
MR cache implementation.
Upon each memory registration mlx5_ib will try to pull a handle from FRMR
pools and upon each deregistration it will push the handle back to it's
appropriate pool.
Use the vendor key field in umr pool key to save the access mode of the
mkey.
Use the option for kernel-only FRMR pool to manage the mkeys used for
registration with DMAH as the translation between UAPI of DMAH and the
mkey property of st_index is non-trivial and changing dynamically.
Since the value for no PH is 0xff and not zero, switch between them in
the frmr_key to have a zero'ed kernel_vendor_key when not using DMAH.
Remove the limitation we had with MR cache for mkeys up to 2^20 dma
blocks and support mkeys up to HW limitations according to caps.
Remove all MR cache related code.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-6-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a configuration of pinned handles on a specific FRMR pool.
The configured amount of pinned handles will not be aged and will stay
available for users to claim.
Upon setting the amount of pinned handles to an FRMR pool, we will make
sure we have at least the pinned amount of handles associated with the
pool and create more, if necessary.
The count for pinned handles take into account handles that are used by
user MRs and handles in the queue.
Introduce a new FRMR operation of build_key that allows drivers to
manipulate FRMR keys supplied by the user, allowing failing for
unsupported properties and masking of properties that are modifiable.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-5-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add aging mechanism to handles of FRMR pools.
Keep the handles stored in FRMR pools for at least 1 minute for
application to reuse, destroy all handles which were not reused.
Add a new queue to each pool to accomplish that.
Upon aging trigger, destroy all FRMR handles from the new 'inactive'
queue and move all handles from the 'active' pool to the 'inactive' pool.
This ensures all destroyed handles were not reused for at least one aging
time period and were not held longer than 2 aging time periods.
Handles from the inactive queue will be popped only if the active queue is
empty.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-3-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a generic Fast Registration Memory Region pools mechanism to allow
drivers to optimize memory registration performance.
Drivers that have the ability to reuse MRs or their underlying HW
objects can take advantage of the mechanism to keep a 'handle' for those
objects and use them upon user request.
We assume that to achieve this goal a driver and its HW should implement
a modify operation for the MRs that is able to at least clear and set the
MRs and in more advanced implementations also support changing a subset
of the MRs properties.
The mechanism is built using an RB-tree consisting of pools, each pool
represents a set of MR properties that are shared by all of the MRs
residing in the pool and are unmodifiable by the vendor driver or HW.
The exposed API from ib_core to the driver has 4 operations:
Init and cleanup - handles data structs and locks for the pools.
Push and pop - store and retrieve 'handle' for a memory registration
or deregistrations request.
The FRMR pools mechanism implements the logic to search the RB-tree for
a pool with matching properties and create a new one when needed and
requires the driver to implement creation and destruction of a 'handle'
when pool is empty or a handle is requested or is being destroyed.
Later patch will introduce Netlink API to interact with the FRMR pools
mechanism to allow users to both configure and track its usage.
A vendor wishing to configure FRMR pool without exposing it or without
exposing internal MR properties to users, should use the
kernel_vendor_key field in the pools key. This can be useful in a few
cases, e.g, when the FRMR handle has a vendor-specific un-modifiable
property that the user registering the memory might not be aware of.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-2-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
Pull x86 fixes from Ingo Molnar:
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)
* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"
* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis
Pull irqchip driver fixes from Ingo Molnar:
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants
- Address Sparse warning by constifying a variable in the MMP driver
- Revert broken commit and also fix an error check in the ls-extirq
driver
* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
Pull SCSI fixes from James Bottomley:
"All changes in drivers (well technically SES is enclosure services,
but its change is minor). The biggest is the write combining change in
lpfc followed by the additional NULL checks in mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix shift out of bounds when MAXQ=32
scsi: ufs: core: Move link recovery for hibern8 exit failure to wl_resume
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
scsi: snic: MAINTAINERS: Update snic maintainers
scsi: snic: Remove unused linkstatus
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
scsi: ufs: core: Reset urgent_bkops_lvl to allow runtime PM power mode
scsi: ses: Fix devices attaching to different hosts
scsi: ufs: core: Fix RPMB region size detection for UFS 2.2
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
scsi: lpfc: Properly set WC for DPP mapping
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
Pull driver core fixes from Danilo Krummrich:
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()")
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n
* tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
clk: scu/imx8qxp: do not register driver in probe()
rust: io: macro_export io_define_read!() and io_define_write!()
device property: Allow secondary lookup in fwnode_get_next_child_node()
Pull smb client fixes from Steve French:
- Two multichannel fixes
- Locking fix for superblock flags
- Fix to remove debug message that could log password
- Cleanup fix for setting credentials
* tag 'v7.0rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Use snprintf in cifs_set_cifscreds
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
smb: client: fix broken multichannel with krb5+signing
smb: client: use atomic_t for mnt_cifs_flags
smb: client: fix cifs_pick_channel when channels are equally loaded
Pull spi fixes from Mark Brown:
"One fix for the stm32 driver which got broken for DMA chaining cases,
plus a removal of some straggling bindings for the Bikal SoC which has
been pulled out of the kernel"
* tag 'spi-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: fix missing pointer assignment in case of dma chaining
spi: dt-bindings: snps,dw-abp-ssi: Remove unused bindings
Pull regulator fixes from Mark Brown:
"A small pile of fixes, none of which are super major - the code fixes
are improved error handling and fixing a leak of a device node.
We also have a typo fix and an improvement to make the binding example
for mt6359 more directly usable"
* tag 'regulator-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Kconfig: fix a typo
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
regulator: fp9931: Fix PM runtime reference leak in fp9931_hwmon_read()
regulator: tps65185: check devm_kzalloc() result in probe
regulator: dt-bindings: mt6359: make regulator names unique
Pull s390 fixes from Vasily Gorbik:
- Fix guest pfault init to pass a physical address to DIAG 0x258,
restoring pfault interrupts and avoiding vCPU stalls during host
page-in
- Fix kexec/kdump hangs with stack protector by marking
s390_reset_system() __no_stack_protector; set_prefix(0) switches
lowcore and the canary no longer matches
- Fix idle/vtime cputime accounting (idle-exit ordering, vtimer
double-forwarding) and small cleanups
* tag 's390-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pfault: Fix virtual vs physical address confusion
s390/kexec: Disable stack protector in s390_reset_system()
s390/idle: Remove psw_idle() prototype
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
s390/irq/idle: Remove psw bits early
s390/idle: Inline update_timer_idle()
s390/idle: Slightly optimize idle time accounting
s390/idle: Add comment for non obvious code
s390/vtime: Fix virtual timer forwarding
s390/idle: Fix cpu idle exit cpu time accounting
KVM/arm64 fixes for 7.0, take #1
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered...
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Chaignon says:
====================
Fix invariant violation for single-value tnums
We're hitting an invariant violation in Cilium that sometimes leads to
BPF programs being rejected and Cilium failing to start [1]. As far as
I know this is the first case of invariant violation found in a real
program (i.e., not by a fuzzer). The following extract from verifier
logs shows what's happening:
from 201 to 236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
; if (magic == MARK_MAGIC_HOST || magic == MARK_MAGIC_OVERLAY || magic == MARK_MAGIC_ENCRYPT) @ bpf_host.c:1337
236: (16) if w9 == 0xe00 goto pc+45 ; R9=scalar(smin=umin=smin32=umin32=3585,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
237: (16) if w9 == 0xf00 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xe01, 0xe00] s64=[0xe01, 0xe00] u32=[0xe01, 0xe00] s32=[0xe01, 0xe00] var_off=(0xe00, 0x0)
More details are given in the second patch, but in short, the verifier
should be able to detect that the false branch of instruction 237 is
never true. After instruction 236, the u64 range and the tnum overlap
in a single value, 0xf00.
The long-term solution to invariant violation is likely to rely on the
refinement + invariant violation check to detect dead branches, as
started by Eduard. To fix the current issue, we need something with
less refactoring that we can backport to affected kernels.
The solution implemented in the second patch is to improve the bounds
refinement to avoid this case. It relies on a new tnum helper,
tnum_step, first sent as an RFC in [2]. The last two patches extend and
update the selftests.
Link: https://github.com/cilium/cilium/issues/44216 [1]
Link: https://lore.kernel.org/bpf/20251107192328.2190680-2-harishankar.vishwanathan@gmail.com/ [2]
Changes in v3:
- Fix commit description error spotted by AI bot.
- Simplify constants in first two tests (Eduard).
- Rework comment on third test (Eduard).
- Add two new negative test cases (Eduard).
- Rebased.
Changes in v2:
- Add guard suggested by Hari in tnum_step, to avoid undefined
behavior spotted by AI code review.
- Add explanation diagrams in code as suggested by Eduard.
- Rework conditions for readability as suggested by Eduard.
- Updated reference to SMT formula.
- Rebased.
====================
Link: https://patch.msgid.link/cover.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The reg_bounds_crafted tests validate the verifier's range analysis
logic. They focus on the actual ranges and thus ignore the tnum. As a
consequence, they carry the assumption that the tested cases can be
reproduced in userspace without using the tnum information.
Unfortunately, the previous change the refinement logic breaks that
assumption for one test case:
(u64)2147483648 (u32)<op> [4294967294; 0x100000000]
The tested bytecode is shown below. Without our previous improvement, on
the false branch of the condition, R7 is only known to have u64 range
[0xfffffffe; 0x100000000]. With our improvement, and using the tnum
information, we can deduce that R7 equals 0x100000000.
19: (bc) w0 = w6 ; R6=0x80000000
20: (bc) w0 = w7 ; R7=scalar(smin=umin=0xfffffffe,smax=umax=0x100000000,smin32=-2,smax32=0,var_off=(0x0; 0x1ffffffff))
21: (be) if w6 <= w7 goto pc+3 ; R6=0x80000000 R7=0x100000000
R7's tnum is (0; 0x1ffffffff). On the false branch, regs_refine_cond_op
refines R7's u32 range to [0; 0x7fffffff]. Then, __reg32_deduce_bounds
refines the s32 range to 0 using u32 and finally also sets u32=0.
From this, __reg_bound_offset improves the tnum to (0; 0x100000000).
Finally, our previous patch uses this new tnum to deduce that it only
intersect with u64=[0xfffffffe; 0x100000000] in a single value:
0x100000000.
Because the verifier uses the tnum to reach this constant value, the
selftest is unable to reproduce it by only simulating ranges. The
solution implemented in this patch is to change the test case such that
there is more than one overlap value between u64 and the tnum. The max.
u64 value is thus changed from 0x100000000 to 0x300000000.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/50641c6a7ef39520595dcafa605692427c1006ec.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch introduces selftests to cover the new bounds refinement
logic introduced in the previous patch. Without the previous patch,
the first two tests fail because of the invariant violation they
trigger. The last test fails because the R10 access is not detected as
dead code. In addition, all three tests fail because of R0 having a
non-constant value in the verifier logs.
In addition, the last two cases are covering the negative cases: when we
shouldn't refine the bounds because the u64 and tnum overlap in at least
two values.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/90d880c8cf587b9f7dc715d8961cd1b8111d01a8.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We're hitting an invariant violation in Cilium that sometimes leads to
BPF programs being rejected and Cilium failing to start [1]. The
following extract from verifier logs shows what's happening:
from 201 to 236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
; if (magic == MARK_MAGIC_HOST || magic == MARK_MAGIC_OVERLAY || magic == MARK_MAGIC_ENCRYPT) @ bpf_host.c:1337
236: (16) if w9 == 0xe00 goto pc+45 ; R9=scalar(smin=umin=smin32=umin32=3585,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
237: (16) if w9 == 0xf00 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xe01, 0xe00] s64=[0xe01, 0xe00] u32=[0xe01, 0xe00] s32=[0xe01, 0xe00] var_off=(0xe00, 0x0)
We reach instruction 236 with two possible values for R9, 0xe00 and
0xf00. This is perfectly reflected in the tnum, but of course the ranges
are less accurate and cover [0xe00; 0xf00]. Taking the fallthrough path
at instruction 236 allows the verifier to reduce the range to
[0xe01; 0xf00]. The tnum is however not updated.
With these ranges, at instruction 237, the verifier is not able to
deduce that R9 is always equal to 0xf00. Hence the fallthrough pass is
explored first, the verifier refines the bounds using the assumption
that R9 != 0xf00, and ends up with an invariant violation.
This pattern of impossible branch + bounds refinement is common to all
invariant violations seen so far. The long-term solution is likely to
rely on the refinement + invariant violation check to detect dead
branches, as started by Eduard. To fix the current issue, we need
something with less refactoring that we can backport.
This patch uses the tnum_step helper introduced in the previous patch to
detect the above situation. In particular, three cases are now detected
in the bounds refinement:
1. The u64 range and the tnum only overlap in umin.
u64: ---[xxxxxx]-----
tnum: --xx----------x-
2. The u64 range and the tnum only overlap in the maximum value
represented by the tnum, called tmax.
u64: ---[xxxxxx]-----
tnum: xx-----x--------
3. The u64 range and the tnum only overlap in between umin (excluded)
and umax.
u64: ---[xxxxxx]-----
tnum: xx----x-------x-
To detect these three cases, we call tnum_step(tnum, umin), which
returns the smallest member of the tnum greater than umin, called
tnum_next here. We're in case (1) if umin is part of the tnum and
tnum_next is greater than umax. We're in case (2) if umin is not part of
the tnum and tnum_next is equal to tmax. Finally, we're in case (3) if
umin is not part of the tnum, tnum_next is inferior or equal to umax,
and calling tnum_step a second time gives us a value past umax.
This change implements these three cases. With it, the above bytecode
looks as follows:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (47) r0 |= 3584 ; R0=scalar(smin=0x8000000000000e00,umin=umin32=3584,smin32=0x80000e00,var_off=(0xe00; 0xfffffffffffff1ff))
2: (57) r0 &= 3840 ; R0=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
3: (15) if r0 == 0xe00 goto pc+2 ; R0=3840
4: (15) if r0 == 0xf00 goto pc+1
4: R0=3840
6: (95) exit
In addition to the new selftests, this change was also verified with
Agni [3]. For the record, the raw SMT is available at [4]. The property
it verifies is that: If a concrete value x is contained in all input
abstract values, after __update_reg_bounds, it will continue to be
contained in all output abstract values.
Link: https://github.com/cilium/cilium/issues/44216 [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Link: https://github.com/bpfverif/agni [3]
Link: https://pastebin.com/raw/naCfaqNx [4]
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/ef254c4f68be19bd393d450188946821c588565d.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit introduces tnum_step(), a function that, when given t, and a
number z returns the smallest member of t larger than z. The number z
must be greater or equal to the smallest member of t and less than the
largest member of t.
The first step is to compute j, a number that keeps all of t's known
bits, and matches all unknown bits to z's bits. Since j is a member of
the t, it is already a candidate for result. However, we want our result
to be (minimally) greater than z.
There are only two possible cases:
(1) Case j <= z. In this case, we want to increase the value of j and
make it > z.
(2) Case j > z. In this case, we want to decrease the value of j while
keeping it > z.
(Case 1) j <= z
t = xx11x0x0
z = 10111101 (189)
j = 10111000 (184)
^
k
(Case 1.1) Let's first consider the case where j < z. We will address j
== z later.
Since z > j, there had to be a bit position that was 1 in z and a 0 in
j, beyond which all positions of higher significance are equal in j and
z. Further, this position could not have been unknown in a, because the
unknown positions of a match z. This position had to be a 1 in z and
known 0 in t.
Let k be position of the most significant 1-to-0 flip. In our example, k
= 3 (starting the count at 1 at the least significant bit). Setting (to
1) the unknown bits of t in positions of significance smaller than
k will not produce a result > z. Hence, we must set/unset the unknown
bits at positions of significance higher than k. Specifically, we look
for the next larger combination of 1s and 0s to place in those
positions, relative to the combination that exists in z. We can achieve
this by concatenating bits at unknown positions of t into an integer,
adding 1, and writing the bits of that result back into the
corresponding bit positions previously extracted from z.
>From our example, considering only positions of significance greater
than k:
t = xx..x
z = 10..1
+ 1
-----
11..0
This is the exact combination 1s and 0s we need at the unknown bits of t
in positions of significance greater than k. Further, our result must
only increase the value minimally above z. Hence, unknown bits in
positions of significance smaller than k should remain 0. We finally
have,
result = 11110000 (240)
(Case 1.2) Now consider the case when j = z, for example
t = 1x1x0xxx
z = 10110100 (180)
j = 10110100 (180)
Matching the unknown bits of the t to the bits of z yielded exactly z.
To produce a number greater than z, we must set/unset the unknown bits
in t, and *all* the unknown bits of t candidates for being set/unset. We
can do this similar to Case 1.1, by adding 1 to the bits extracted from
the masked bit positions of z. Essentially, this case is equivalent to
Case 1.1, with k = 0.
t = 1x1x0xxx
z = .0.1.100
+ 1
---------
.0.1.101
This is the exact combination of bits needed in the unknown positions of
t. After recalling the known positions of t, we get
result = 10110101 (181)
(Case 2) j > z
t = x00010x1
z = 10000010 (130)
j = 10001011 (139)
^
k
Since j > z, there had to be a bit position which was 0 in z, and a 1 in
j, beyond which all positions of higher significance are equal in j and
z. This position had to be a 0 in z and known 1 in t. Let k be the
position of the most significant 0-to-1 flip. In our example, k = 4.
Because of the 0-to-1 flip at position k, a member of t can become
greater than z if the bits in positions greater than k are themselves >=
to z. To make that member *minimally* greater than z, the bits in
positions greater than k must be exactly = z. Hence, we simply match all
of t's unknown bits in positions more significant than k to z's bits. In
positions less significant than k, we set all t's unknown bits to 0
to retain minimality.
In our example, in positions of greater significance than k (=4),
t=x000. These positions are matched with z (1000) to produce 1000. In
positions of lower significance than k, t=10x1. All unknown bits are set
to 0 to produce 1001. The final result is:
result = 10001001 (137)
This concludes the computation for a result > z that is a member of t.
The procedure for tnum_step() in this commit implements the idea
described above. As a proof of correctness, we verified the algorithm
against a logical specification of tnum_step. The specification asserts
the following about the inputs t, z and output res that:
1. res is a member of t, and
2. res is strictly greater than z, and
3. there does not exist another value res2 such that
3a. res2 is also a member of t, and
3b. res2 is greater than z
3c. res2 is smaller than res
We checked the implementation against this logical specification using
an SMT solver. The verification formula in SMTLIB format is available
at [1]. The verification returned an "unsat": indicating that no input
assignment exists for which the implementation and the specification
produce different outputs.
In addition, we also automatically generated the logical encoding of the
C implementation using Agni [2] and verified it against the same
specification. This verification also returned an "unsat", confirming
that the implementation is equivalent to the specification. The formula
for this check is also available at [3].
Link: https://pastebin.com/raw/2eRWbiit [1]
Link: https://github.com/bpfverif/agni [2]
Link: https://pastebin.com/raw/EztVbBJ2 [3]
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/93fdf71910411c0f19e282ba6d03b4c65f9c5d73.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiayuan Chen says:
====================
bpf: Fix per-CPU bulk queue races on PREEMPT_RT
On PREEMPT_RT kernels, local_bh_disable() only calls migrate_disable()
(when PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption. This means CFS scheduling can preempt a task inside the
per-CPU bulk queue (bq) operations in cpumap and devmap, allowing
another task on the same CPU to concurrently access the same bq,
leading to use-after-free, list corruption, and kernel panics.
Patch 1 fixes the cpumap race in bq_flush_to_queue(), originally
reported by syzbot [1].
Patch 2 fixes the same class of race in devmap's bq_xmit_all(),
identified by code inspection after Sebastian Andrzej Siewior pointed
out that devmap has the same per-CPU bulk queue pattern [2].
Both patches use local_lock_nested_bh() to serialize access to the
per-CPU bq. On non-RT this is a pure lockdep annotation with no
overhead; on PREEMPT_RT it provides a per-CPU sleeping lock.
To reproduce the devmap race, insert an mdelay(100) in bq_xmit_all()
after "cnt = bq->count" and before the actual transmit loop. Then pin
two threads to the same CPU, each running BPF_PROG_TEST_RUN with an XDP
program that redirects to a DEVMAP entry (e.g. a veth pair). CFS
timeslicing during the mdelay window causes interleaving. Without the
fix, KASAN reports null-ptr-deref due to operating on freed frames:
BUG: KASAN: null-ptr-deref in __build_skb_around+0x22d/0x340
Write of size 32 at addr 0000000000000d50 by task devmap_race_rep/449
CPU: 0 UID: 0 PID: 449 Comm: devmap_race_rep Not tainted 6.19.0+ #31 PREEMPT_RT
Call Trace:
<TASK>
__build_skb_around+0x22d/0x340
build_skb_around+0x25/0x260
__xdp_build_skb_from_frame+0x103/0x860
veth_xdp_rcv_bulk_skb.isra.0+0x162/0x320
veth_xdp_rcv.constprop.0+0x61e/0xbb0
veth_poll+0x280/0xb50
__napi_poll.constprop.0+0xa5/0x590
net_rx_action+0x4b0/0xea0
handle_softirqs.isra.0+0x1b3/0x780
__local_bh_enable_ip+0x12a/0x240
xdp_test_run_batch.constprop.0+0xedd/0x1f60
bpf_test_run_xdp_live+0x304/0x640
bpf_prog_test_run_xdp+0xd24/0x1b70
__sys_bpf+0x61c/0x3e00
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
[1] https://lore.kernel.org/all/69369331.a70a0220.38f243.009d.GAE@google.com/T/
[2] https://lore.kernel.org/bpf/20260212023634.366343-1-jiayuan.chen@linux.dev/
v3 -> v4: https://lore.kernel.org/all/20260213034018.284146-1-jiayuan.chen@linux.dev/
- Move panic trace to cover letter. (Sebastian Andrzej Siewior)
- Add Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> to both patches
from cover letter.
v2 -> v3: https://lore.kernel.org/bpf/20260212023634.366343-1-jiayuan.chen@linux.dev/
- Fix commit message: remove incorrect "spin_lock() becomes rt_mutex"
claim, the per-CPU bq has no spin_lock at all. (Sebastian Andrzej Siewior)
- Fix commit message: accurately describe local_lock_nested_bh()
behavior instead of referencing local_lock(). (Sebastian Andrzej Siewior)
- Remove incomplete discussion of snapshot alternative.
(Sebastian Andrzej Siewior)
- Remove panic trace from commit message. (Sebastian Andrzej Siewior)
- Add patch 2/2 for devmap, same race pattern. (Sebastian Andrzej Siewior)
v1 -> v2: https://lore.kernel.org/bpf/20260211064417.196401-1-jiayuan.chen@linux.dev/
- Use local_lock_nested_bh()/local_unlock_nested_bh() instead of
local_lock()/local_unlock(), since these paths already run under
local_bh_disable(). (Sebastian Andrzej Siewior)
- Replace "Caller must hold bq->bq_lock" comment with
lockdep_assert_held() in bq_flush_to_queue(). (Sebastian Andrzej Siewior)
- Fix Fixes tag to 3253cb49cb ("softirq: Allow to drop the
softirq-BKL lock on PREEMPT_RT") which is the actual commit that
makes the race possible. (Sebastian Andrzej Siewior)
====================
Link: https://patch.msgid.link/20260225121459.183121-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
