The last set of reworks included some fixes to change the A83t behaviour
and "fix" it.
It turns out that the controller described in the datasheet and the one
supported here are not the same, yet the A83t has the two of them, and the
one supported in the driver wasn't the one described in the datasheet.
Fix this by reintroducing the proper quirks.
Fixes: 69e450e50c ("ASoC: sun4i-i2s: Fix the LRCK period on A83t")
Fixes: bf943d5279 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t")
Fixes: 2e04fc4dbf ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t")
Fixes: 515fcfbc77 ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs")
Fixes: c1d3a921d7 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs")
Fixes: fb19739d7f ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs")
Fixes: 71137bcd0a ("ASoC: sun4i-i2s: Move the format configuration to a callback")
Fixes: d70be625f2 ("ASoC: sun4i-i2s: Move the channel configuration to a callback")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827123131.29129-2-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 3e9acd7ac6 (ASoC: sun4i-i2s: Remove
duplicated quirks structure").
It turns out that while one I2S controller is described in the A83t
datasheet, the driver supports another, undocumented, one that has been
inherited from the older SoCs, while the documented one uses the new
design.
Fixes: 3e9acd7ac6 ("ASoC: sun4i-i2s: Remove duplicated quirks structure")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827093206.17919-1-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warnings:
sound/soc/sof/imx/imx8.c:104:6: warning: symbol 'imx8_dsp_handle_reply' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:115:6: warning: symbol 'imx8_dsp_handle_request' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:336:5: warning: symbol 'imx8_get_bar_index' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:341:6: warning: symbol 'imx8_ipc_msg_data' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:348:5: warning: symbol 'imx8_ipc_pcm_params' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190823125939.30012-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
From function name point of view, "soc_post_component_init()" sounds
like "component initialize function".
But in reality it is rtd setup function.
This patch renames soc_post_component_init() to soc_rtd_init()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9uo7lc3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can find specified name component via snd_soc_rtdcom_lookup().
But, it is not enough under multi CPU/Codec/Platform, because many
components which have same driver name might be connected to same rtd.
Not using this function as much as possible is best solution,
but some drivers are already deeply depended to it.
We can expand this function, for example having "num" which specifies
found order at parameter, etc (In such case, it need to have fixed
probing order).
Or, use different driver name in such component, etc.
We will have such issue if multi CPU/Codec/Platform were supported.
To indicate it, this patch adds NOTE to this function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874l2c1ldi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
soc-core.c is using device_unregiser(), but there is no its paired
device_regiser(). We can find its code at soc_post_component_init()
which is using device_initialize() and device_add().
Here, device_initialize() + device_add() = device_register().
-- linux/drivers/base/core.c --
int device_register(struct device *dev)
{
device_initialize(dev);
return device_add(dev);
}
device_initialize() is doing each dev member's initialization only,
not related to device parent/release/groups.
Thus, we can postpone it.
let's use device_register() instead of device_initialize()/device_add().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sro1ldw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This controller supports capture and playback running at the same time,
with the limitation that both capture and playback must be configured the
same way (sample rate, sample format, number of channels, etc). For this,
we have to assure that the configuration registers look the same when
capture and playback are initiated.
This patch fixes a bug in which the controller is in master mode and the
hw_params() callback fails for the second audio stream. The fail occurs
because the divisors are calculated after comparing the configuration
registers for capture and playback. The fix consists in calculating the
divisors before comparing the configuration registers. BCLK and LRC are
then configured and started only if the controller is not already running.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-4-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK and BCLK polarity offsets on newer SoCs has been
changed, yet the driver didn't take it into account for all of them.
This was taken into account for the H3, but not the A83t. This was handled
using a reg_field for the H3.
However, the value in that field will not be the same, so reg_field is not
adapted in that case. Let's change for proper calls with the regular
values.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/9cbdde80a299288878e58225df4d7884e0301348.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two main generations of our I2S controller require a slightly different
format configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/dc818644c3e40734e7a97247c994b1fca1c3c047.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two main generations of our I2S controller require a slightly different
channel configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/6414463de69584e8227fa495b13aa5f4798e1f0e.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
