Patch series "Readahead patches for 5.9/5.10".
These are infrastructure for both the THP patchset and for the fscache
rewrite,
For both pieces of infrastructure being build on top of this patchset, we
want the ractl to be available higher in the call-stack.
For David's work, he wants to add the 'critical page' to the ractl so that
he knows which page NEEDS to be brought in from storage, and which ones
are nice-to-have. We might want something similar in block storage too.
It used to be simple -- the first page was the critical one, but then mmap
added fault-around and so for that usecase, the middle page is the
critical one. Anyway, I don't have any code to show that yet, we just
know that the lowest point in the callchain where we have that information
is do_sync_mmap_readahead() and so the ractl needs to start its life
there.
For THP, we havew the code that needs it. It's actually the apex patch to
the series; the one which finally starts to allocate THPs and present them
to consenting filesystems:
798bcf30ab
This patch (of 8):
Allow for a more concise definition of a struct readahead_control.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: David Howells <dhowells@redhat.com>
Link: https://lkml.kernel.org/r/20200903140844.14194-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20200903140844.14194-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a THP is removed from the page cache by reclaim, we replace it with a
shadow entry that occupies all slots of the XArray previously occupied by
the THP. If the user then accesses that page again, we only allocate a
single page, but storing it into the shadow entry replaces all entries
with that one page. That leads to bugs like
page dumped because: VM_BUG_ON_PAGE(page_to_pgoff(page) != offset)
------------[ cut here ]------------
kernel BUG at mm/filemap.c:2529!
https://bugzilla.kernel.org/show_bug.cgi?id=206569
This is hard to reproduce with mainline, but happens regularly with the
THP patchset (as so many more THPs are created). This solution is take
from the THP patchset. It splits the shadow entry into order-0 pieces at
the time that we bring a new page into cache.
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Qian Cai <cai@lca.pw>
Link: https://lkml.kernel.org/r/20200903183029.14930-4-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fix read-only THP for non-tmpfs filesystems".
As described more verbosely in the [3/3] changelog, we can inadvertently
put an order-0 page in the page cache which occupies 512 consecutive
entries. Users are running into this if they enable the
READ_ONLY_THP_FOR_FS config option; see
https://bugzilla.kernel.org/show_bug.cgi?id=206569 and Qian Cai has also
reported it here:
https://lore.kernel.org/lkml/20200616013309.GB815@lca.pw/
This is a rather intrusive way of fixing the problem, but has the
advantage that I've actually been testing it with the THP patches, which
means that it sees far more use than it does upstream -- indeed, Song has
been entirely unable to reproduce it. It also has the advantage that it
removes a few patches from my gargantuan backlog of THP patches.
This patch (of 3):
This function returns the order of the entry at the index. We need this
because there isn't space in the shadow entry to encode its order.
[akpm@linux-foundation.org: export xa_get_order to modules]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Qian Cai <cai@lca.pw>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/r/20200903183029.14930-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20200903183029.14930-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
powerpc used to set the pte specific flags in set_pte_at(). This is
different from other architectures. To be consistent with other
architecture update pfn_pte to set _PAGE_PTE on ppc64. Also, drop now
unused pte_mkpte.
We add a VM_WARN_ON() to catch the usage of calling set_pte_at() without
setting _PAGE_PTE bit. We will remove that after a few releases.
With respect to huge pmd entries, pmd_mkhuge() takes care of adding the
_PAGE_PTE bit.
[akpm@linux-foundation.org: whitespace fix, per Christophe]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20200902114222.181353-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Kunit updates from Shuah Khan:
"Several kunit tool bug fixes in flag handling, run outside kernel
tree, make errors, and generating results"
* tag 'linux-kselftest-kunit-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix display of make errors
kunit: tool: handle when .kunit exists but .kunitconfig does not
kunit: tool: fix --alltests flag
kunit: tool: allow generating test results in JSON
kunit: tool: fix running kunit_tool from outside kernel tree
Pull kselftest updates from Shuah Khan:
- speed up headers_install done during selftest build
- add generic make nesting support
- add support to select individual tests:
Selftests build/install generates run_kselftest.sh script to run
selftests on a target system. Currently the script doesn't have
support for selecting individual tests. Add support for it.
With this enhancement, user can select test collections (or tests)
individually. e.g:
run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep
Additionally adds a way to list all known tests with "-l", usage with
"-h", and perform a dry run without running tests with "-n".
* tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
doc: dev-tools: kselftest.rst: Update examples and paths
selftests/run_kselftest.sh: Make each test individually selectable
selftests: Extract run_kselftest.sh and generate stand-alone test list
selftests: Add missing gitignore entries
selftests: more general make nesting support
selftests: use "$(MAKE)" instead of "make" for headers_install
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
Pull HID updates from Jiri Kosina:
- Lenovo X1 Tablet support improvements from Mikael Wikström
- "heartbeat" report fix for several Wacom devices from Jason Gerecke
- bounds checking fix in hid-roccat from Dan Carpenter
- stylus battery reporting fix from Dmitry Torokhov
- i2c-hid support for wakeup from suspend-to-idle from Kai-Heng Feng
- new driver for Vivaldi devices from Sean O'Brien
- other assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle
HID: add vivaldi HID driver
HID: hid-input: fix stylus battery reporting
HID: wacom: Avoid entering wacom_wac_pen_report for pad / battery
HID: i2c-hid: fix kerneldoc warnings in i2c-hid-core.c
HID: core: fix kerneldoc warnings in hid-core.c
HID: multitouch: Lenovo X1 Tablet Gen2 trackpoint and buttons
HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons
HID: alps: clean up indentation issue
HID: intel-ish-hid: simplify the return expression of ishtp_bus_remove_device()
HID: hid-debug: fix nonblocking read semantics wrt EIO/ERESTARTSYS
HID: i2c-hid: Prefer asynchronous probe
HID: ite: Add USB id match for Acer One S1003 keyboard dock
HID: roccat: add bounds checking in kone_sysfs_write_settings()
HID: wiimote: narrow spinlock range in wiimote_hid_event()
HID: wiimote: make handlers[] const
HID: apple: Add support for Matias wireless keyboard
HID: cp2112: Use irqchip template
Pull livepatching update from Jiri Kosina:
"livepatching kselftest output fix from Miroslav Benes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: Do not check order when using "comm" for dmesg checking
Pull direct-io fix from Jan Kara:
"Fix for unaligned direct IO read past EOF in legacy DIO code"
* tag 'dio_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
direct-io: defer alignment check until after the EOF check
direct-io: don't force writeback for reads beyond EOF
direct-io: clean up error paths of do_blockdev_direct_IO
Pull UDF, reiserfs, ext2, quota fixes from Jan Kara:
- a couple of UDF fixes for issues found by syzbot fuzzing
- a couple of reiserfs fixes for issues found by syzbot fuzzing
- some minor ext2 cleanups
- quota patches to support grace times beyond year 2038 for XFS quota
APIs
* tag 'fs_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: Fix oops during mount
udf: Limit sparing table size
udf: Remove pointless union in udf_inode_info
udf: Avoid accessing uninitialized data on failed inode read
quota: clear padding in v2r1_mem2diskdqb()
reiserfs: Initialize inode keys properly
udf: Fix memory leak when mounting
udf: Remove redundant initialization of variable ret
reiserfs: only call unlock_new_inode() if I_NEW
ext2: Fix some kernel-doc warnings in balloc.c
quota: Expand comment describing d_itimer
quota: widen timestamps for the fs_disk_quota structure
reiserfs: Fix memory leak in reiserfs_parse_options()
udf: Use kvzalloc() in udf_sb_alloc_bitmap()
ext2: remove duplicate include
Pull configfs updates from Christoph Hellwig:
"Various cleanups for the configfs samples (Bartosz Golaszewski)"
* tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs:
samples: configfs: prefer pr_err() over bare printk(KERN_ERR
samples: configfs: don't use spaces before tabs
samples: configfs: consolidate local variables of the same type
samples: configfs: don't reinitialize variables which are already zeroed
samples: configfs: replace simple_strtoul() with kstrtoint()
samples: configfs: fix alignment in item struct
samples: configfs: drop unnecessary ternary operators
samples: configfs: remove redundant newlines
MAINTAINERS: add the sample directory to the configfs entry
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Pull dmaengine updates from Vinod Koul:
"Core:
- Mark dma_request_slave_channel() deprecated in favour of
dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Also updates to bunch of driver notably TI, DW and AXI-DMAC"
* tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits)
dmaengine: owl-dma: fix kernel-doc style for enum
dmaengine: zynqmp_dma: fix kernel-doc style for tasklet
dmaengine: xilinx_dma: fix kernel-doc style for tasklet
dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet
dmaengine: altera-msgdma: fix kernel-doc style for tasklet
dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API
dt-bindings: Fix 'reg' size issues in zynqmp examples
dmaengine: rcar-dmac: drop double zeroing
dmaengine: sh: drop double zeroing
dmaengine: ioat: Allocate correct size for descriptor chunk
dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname
dmaengine: fsl: remove bad channel update
dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status
dmaengine: pl330: fix argument for tasklet
dmaengine: dmatest: Return boolean result directly in filter()
dmaengine: dmatest: Check list for emptiness before access its last entry
dmaengine: ti: k3-udma-glue: fix channel enable functions
dmaengine: iop-adma: Fix pointer cast warnings
dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c
...
Many laptops can be woken up from Suspend-to-Idle by touchpad. This is
also the default behavior on other OSes.
However, if touchpad and touchscreen contact to each other when lid is
closed, wakeup events can be triggered inadventertly.
So let's disable the wakeup by default, but enable the wakeup capability
so users can enable it at their own discretion.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
