GCC warns that vaddr is set but unused. Check the return value of
ion_buffer_kmap_get to make vaddr useful and make sure everything
is properly configured before beginning a DMA.
Suggested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_sme_set_pmksa function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_sme_set_rsn function
which are being used together with cpu_to_le16 using uint16_t
as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameters 'failure_count' and 'timer' was declared as unsigned
short and then there was being casted to u16 inside cpu_to_le16
to make the assignation. Just declare them as 'u16' and avoid
casting at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function hostif_bss_scan_request parameters 'scan_ssid' and
'scan_ssid_len' are declared as uint8_t. Change them to be 'u8'
instead which is preferred. Also update two casts inside the same
function to use 'u32' instead of 'uint32_t'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_phy_information_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_infrastructure_set_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_ps_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are soem assignments inside init_request function which
are being used together with cpu_to_le16 using uint16_t as cast
type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use u16 as cast type in hostif_start_request function replacing
uint16_t which was being used.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ks_wlan_cap there is a cast to uint16_t to use cpu_to_le16
with variable 'capability' which is already defined as u16.
Avoid this cast to clean code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second parameter 'mib_attribute' in function hostif_mib_get_request
is declared as unsigned long and inside the function a cast to uint32_t
is being used. Just pass a u32 instead and avoid the casting.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some castings inside the function hostif_data_request
which are being using with uint16_t type. Fields which have being
assigned are declared as u16. So update casts types to u16 in all
of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Field 'counter' in mic_failure struct is being assigned casting
value using uint16_t. Replace with u16 which is the correct type
of the field and the preferred one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'wakeup_count' in 'ks_wlan_private' struct is declared
as 'uint' which is not a standard type. Replace in favour of
'unsigned int' which it is.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_rx_gain a cast to uint8_t is being used
to assign reception gain. 'rx_gain' field is defined as u8 so
replace the cast to the correct type
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_tx_gain a cast to uint8_t is being used
to assign transmission gain. 'tx_gain' field is defined as u8 so
replace the cast to the correct type.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some casts to uint8_t in ks_wlan_set_rate function to
assign values of the bitrate. Just change it to u8 which is the one
defined for the field 'body' of the struct which is in use.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter 'size' in function ks_wlan_hw_rx is declared as
uint16_t and can be declared as size_t which makes more sense.
It is being passed to hif_align_size function which also expects
a size_t as parameter so just change its type. Also update two
casts in calls to this function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header size and event fields of header are declared
as __le16 and being casted using uint16_t in cpu_to_le16.
Change cast to use preferred u16.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'byte' in ks7010_upload_firmware function is declared
as unsigned char and is only being used to read hardware
registers which are expected in sdio_read_byteb function as u8.
Change 'byte' variable type to u8 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was two blank lines between definitions and statements
in ks7010_upload_firmware function. Remove one of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the ugly macro hack to make sure hw_stats and ethtool
strings are consisten, instead define a new struct which will hold the
stat string and his index within the hw_stats struct.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'connect_resp_info' structure as most of its elements are not used.
Modified wilc_parse_assoc_resp_info() to directly parse and fill value
in connect_info structure variable. Remove use of 'assoc_resp_len' variable.
get_assoc_resp_cap_info() & get_asoc_id() functions are remove as its
not used anymore.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'flag' function parameter in wilc_mac_indicate() as only one
condition was handled using that parameter. Also removed unnecessary
call to wilc_mac_indicate() as no operation was performed in that
function call.
After above changes below macros are not required anymore.
WILC_MAC_INDICATE_STATUS 0x1
WILC_MAC_INDICATE_SCAN 0x2
This changes also helped in resolving the line over 80 chars issue
found by checkatpch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added new macro to resolve below checkpatch issues in linux_mon.
"Lines should not end with a '('"
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 chars issue found by checkpatch.pl script by placing
the comment message above the macro preprocessor.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to fix open parenthesis alignment issue reported by
checkpatch.pl script in del_station().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to avoid use of datatype in variable name to follow as
per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issues found by checkpatch.pl script with
the help of local variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issue found by checkpatch.pl script in
function declaration.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issues reported by checkpatch.pl script in
wilc_wfi_cfg_tx_vendor_spec() by using temporary variable. Simplified
'if else' condition with 'if'.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor wilc_wfi_remain_on_channel_expired() to avoid line over 80
character issue reported by checkpatch.pl script. Also assigned value in the
variable at the time of declaration.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow(). Also
added code to set 'ies_len' to zero in case of memory allocation
failure.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issue reported by checkpatch in
add_network_to_shadow() by using temporary variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
