OP-TEE kernel private shared memory optimizations
Optimize OP-TEE driver private shared memory allocated as dynamic shared
memory. Both to handle larger than one page allocations and for more
efficient memory usage.
* tag 'kern-priv-shm-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: allocate shared memory with alloc_pages_exact()
optee: add page list to kernel private shared memory
Link: https://lore.kernel.org/r/20231211115815.GA616539@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE: asynchronous notifications with FF-A
Add support for asynchronous notifications in the OP-TEE FF-A driver. This
is the FF-A counterpart to the asynchronous notifications already
available in the OP-TEE SMC ABI.
* tag 'ffa-notif-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: ffa_abi: add asynchronous notifications
optee: provide optee_do_bottom_half() as a common function
Link: https://lore.kernel.org/r/20231211105249.GA587253@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE add reserved system thread
Add support for a reserved system thread in the SMC-ABI of the OP-TEE driver.
SCMI with OP-TEE transport uses this to guarantee that it will always have
a thread available in the secure world.
* tag 'system-thread-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
firmware: arm_scmi: optee: use optee system invocation
tee: optee: support tracking system threads
tee: system session
tee: optee: system thread call property
Link: https://lore.kernel.org/r/20231211102600.GA571787@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
HiSilicon driver updates for v6.8
- Add support for the platform with PCC type3 and interrupt ack
- Few cleanups and improvements: correct the format of some strings and domain typo,
add failure log
* tag 'hisi-drivers-for-6.8' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Support the platform with PCC type3 and interrupt ack
doc: kunpeng_hccs: Fix incorrect email domain name
soc: hisilicon: kunpeng_hccs: Remove an unused blank line
soc: hisilicon: kunpeng_hccs: Add failure log for no _CRS method
soc: hisilicon: kunpeng_hccs: Fix some incorrect format strings
Link: https://lore.kernel.org/r/6572C41B.6050703@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support the platform with PCC type3 and interrupt ack. And a version
specific structure is introduced to handle the difference between the
device in the code.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The email domain name in Contact is wrong. So this patch has to modify it.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Driver gets the PCC channel id by using the PCC GAS in _CRS.
But, currently, if the firmware has no _CRS method on platform, there
is not any failure log. So this patch adds the log for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This series converts all drivers below drivers/bus to struct
platform_driver::remove_new(). See commit 5c5a7680e6 ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.
After the initial simplification in commit 864acca580 ("bus: fsl-mc:
Drop if block with always false condition") all conversations are
trivial because the remove callbacks all return zero unconditionally.
* tag 'bus-platform-remove-void' of https://git.pengutronix.de/git/ukl/linux:
bus: ts-nbus: Convert to platform remove callback returning void
bus: ti-sysc: Convert to platform remove callback returning void
bus: ti-pwmss: Convert to platform remove callback returning void
bus: tegra-gmi: Convert to platform remove callback returning void
bus: tegra-aconnect: Convert to platform remove callback returning void
bus: sunxi-rsb: Convert to platform remove callback returning void
bus: sun50i-de2: Convert to platform remove callback returning void
bus: simple-pm-bus: Convert to platform remove callback returning void
bus: qcom-ssc-block-bus: Convert to platform remove callback returning void
bus: omap_l3_smx: Convert to platform remove callback returning void
bus: omap-ocp2scp: Convert to platform remove callback returning void
bus: hisi_lpc: Convert to platform remove callback returning void
bus: fsl-mc: Convert to platform remove callback returning void
bus: fsl-mc: Drop if block with always false condition
Link: https://lore.kernel.org/r/20231128174927.m46dgp4juig2omci@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Apple SoC mailbox updates for 6.8
This moves the mailbox driver out of the mailbox subsystem and into SoC,
next to its only consumer (RTKit). It has been cooking in linux-next for
a long while, so it's time to pull it in.
* tag 'asahi-soc-mailbox-6.8' of https://github.com/AsahiLinux/linux:
soc: apple: mailbox: Add explicit include of platform_device.h
soc: apple: mailbox: Rename config symbol to APPLE_MAILBOX
mailbox: apple: Delete driver
soc: apple: rtkit: Port to the internal mailbox driver
soc: apple: mailbox: Add ASC/M3 mailbox driver
soc: apple: rtkit: Get rid of apple_rtkit_send_message_wait
Link: https://lore.kernel.org/r/6e64472e-c55d-4499-9a61-da59cfd28021@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allocate memory to share with the secure world using alloc_pages_exact()
instead of alloc_pages() for more efficient memory usage.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Until now has kernel private shared memory allocated as dynamic shared
memory (not from the static shared memory pool) been returned without a
list of physical pages on allocations via RPC. To support allocations
larger than one page add a list of physical pages.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231109202830.4124591-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20231109202830.4124591-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20231109202830.4124591-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231109202830.4124591-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231109202830.4124591-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231109202830.4124591-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
Pull x86 microcode fixes from Ingo Molnar:
"Fix/enhance x86 microcode version reporting: fix the bootup log spam,
and remove the driver version announcement to avoid version confusion
when distros backport fixes"
* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Rework early revisions reporting
x86/microcode: Remove the driver announcement and version
Pull x86 perf event fix from Ingo Molnar:
"Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
code resulting in non-working events on those platforms"
* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
Pull smb client fixes from Steve French:
- use after free fix in releasing multichannel interfaces
- fixes for special file types (report char, block, FIFOs properly when
created e.g. by NFS to Windows)
- fixes for reporting various special file types and symlinks properly
when using SMB1
* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: introduce cifs_sfu_make_node()
smb: client: set correct file type from NFS reparse points
smb: client: introduce ->parse_reparse_point()
smb: client: implement ->query_reparse_point() for SMB1
cifs: fix use after free for iface while disabling secondary channels
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
Pull arm64 fixes from Catalin Marinas:
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: add dependency between vmlinuz.efi and Image
kselftest/arm64: Fix output formatting for za-fork
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
Pull xen fixes from Juergen Gross:
- A small cleanup patch for the Xen privcmd driver
- A fix for the swiotlb-xen driver which was missing the advertising of
the maximum mapping length
- A fix for Xen on Arm for a longstanding bug, which happened to occur
only recently: a structure in percpu memory crossed a page boundary,
which was rejected by the hypervisor
* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: fix xen_vcpu_info allocation alignment
xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
swiotlb-xen: provide the "max_mapping_size" method
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Pull s390 updates from Alexander Gordeev:
- Remove unnecessary assignment of the performance event last_tag.
- Create missing /sys/firmware/ipl/* attributes when kernel is booted
in dump mode using List-directed ECKD IPL.
- Remove odd comment.
- Fix s390-specific part of scripts/checkstack.pl script that only
matches three-digit numbers starting with 3 or any higher number and
skips any stack sizes smaller than 304 bytes.
* tag 's390-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/checkstack.pl: match all stack sizes for s390
s390: remove odd comment
s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init()
s390/pai: cleanup event initialization
Pull ACPI fixes from Rafael Wysocki:
"These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and
fix an ACPI processor idle issue leading to triple-faults in Xen HVM
guests and an ACPI backlight driver issue that causes GPUs to
misbehave while their children power is being fixed up.
Specifics:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede)
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse)
- Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans
de Goede)"
* tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
Pull power management fix from Rafael Wysocki:
"Fix a syntax error in the sleepgraph utility which causes it to exit
early on every invocation (David Woodhouse)"
* tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: tools: Fix sleepgraph syntax error
Pull AFS fixes from David Howells:
- Fix the afs_server_list struct to be cleaned up with RCU
- Fix afs to translate a no-data result from a DNS lookup into ENOENT,
not EDESTADDRREQ for consistency with OpenAFS
- Fix afs to translate a negative DNS lookup result into ENOENT rather
than EDESTADDRREQ
- Fix file locking on R/O volumes to operate in local mode as the
server doesn't handle exclusive locks on such files
- Set SB_RDONLY on superblocks for RO and Backup volumes so that the
VFS can see that they're read only
* tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
afs: Fix file locking on R/O volumes to operate in local mode
afs: Return ENOENT if no cell DNS record can be found
afs: Make error on cell lookup failure consistent with OpenAFS
afs: Fix afs_server_list to be cleaned up with RCU
Merge ACPI backlight driver fixes and an ACPI processor driver fix for
6.7-rc3:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede).
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse).
* acpi-video:
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
* acpi-processor:
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
