On i.MX8MM the register of volume control has positive and negative
values. It is different from other platforms like i.MX8MP and i.MX93
which only have positive values. Add a volume_sx flag to use SX_TLV
volume control for this kind of platform. Use common TLV volume control
for other platforms.
Fixes: cdfa92eb90 ("ASoC: fsl_micfil: Correct the number of steps on SX controls")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20241017071507.2577786-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Turns out some registers of pre-2.5 version of rxmacro codecs are not
located at the expected offsets but 0xc further away in memory. So far
the detected registers are CDC_RX_RX2_RX_PATH_SEC7 and
CDC_RX_RX2_RX_PATH_DSM_CTL.
CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n) macro incorrectly generates the address
0x540 for RX2 but it should be 0x54C and it also overwrites
CDC_RX_RX2_RX_PATH_SEC7 which is located at 0x540.
The same goes for CDC_RX_RXn_RX_PATH_SEC7(rx, n).
Fix this by introducing additional rxn_reg_stride2 offset. For 2.5 version
and above this offset will be equal to 0.
With such change the corresponding RXn() macros will generate the same
values for 2.5 codec version for all RX paths and the same old values
for pre-2.5 version for RX0 and RX1. However for the latter case with
RX2 path it will also add rxn_reg_stride2 on top.
While at this, also remove specific if-check for INTERP_AUX from
rx_macro_digital_mute() and rx_macro_enable_interp_clk(). These if-check
was used to handle such special offset for AUX interpolator but since
CDC_RX_RXn_RX_PATH_SEC7(rx, n) and CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n)
macros will generate the correst addresses of dsm register, they are no
longer needed.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241016221049.1145101-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On the HiHope boards, we have a single port with a single endpoint defined
as below:
....
rsnd_port: port {
rsnd_endpoint: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint>;
frame-master = <&rsnd_endpoint>;
playback = <&ssi2>;
};
};
....
With commit 547b02f74e ("ASoC: rsnd: enable multi Component support for
Audio Graph Card/Card2"), support for multiple ports was added. This caused
probe failures on HiHope boards, as the endpoint could not be retrieved due
to incorrect device node pointers being used.
This patch fixes the issue by updating the `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions to use the correct device node pointers based
on the port names ('port' or 'ports'). It ensures that the endpoint is
properly parsed for both single and multi-port configurations, restoring
compatibility with HiHope boards.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241010141432.716868-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable slot_found is being initialized to zero and inside
a for-loop is being checked if it's reached MAX_NUM_CH, however,
this is currently impossible since slot_found is never changed.
In a previous loop a similar coding pattern is used and slot_found
is being incremented. It appears the increment of slot_found is
missing from the loop, so fix the code by adding in the increment.
Fixes: 6a8e1d46f0 ("ASoC: max98388: add amplifier driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241010182032.776280-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation does not work for widgets of DAPMs without
component, as snd_soc_dapm_to_component() requires it. If the widget is
directly owned by the card, e.g. as it is the case for the tegra
implementation, the call leads to UB. Therefore directly access the
component of the widget's DAPM to be able to check if a component is
available.
Fixes: f82eb06a40 ("ASoC: tegra: machine: Handle component name prefix")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://patch.msgid.link/20241008-tegra-dapm-v2-1-5e999cb5f0e7@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function snd_pcm_period_elapsed() is part of sequence servicing HDAudio
stream IRQs. It's called under Global Interrupt Enable (GIE) disabled -
no HDAudio interrupts will be raised. At the same time, the function may
end up calling __snd_pcm_xrun() or snd_pcm_drain_done(). On the
avs-driver side, this translates to IPCs and as GIE is disabled, these
will never complete successfully.
Improve system stability by scheduling stream-IRQ handling in a separate
thread.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20241008083758.756578-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
