In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d23 ("idpf: negotiate PTP capabilities and get PTP clock")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260506233745.111895-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These methods generally consume ownership of the provided skb, so even
if an error path is encountered, the skb is freed. This is because the
very first thing they do after some initial setup is to unconditionally
consume the skb via consume_skb(skb). Any subsequent errors lead to the
core netlink layer freeing the skb.
However, there is one check that occurs before ownership is passed,
which is the check for the group index. So if this error condition is
encountered, then the skb is leaked. This error condition is generally
considered a violation of the netlink API, so it's not expected to occur
under normal circumstances. For the same reason, no callers check for
this error condition, and no callers need to be adjusted. However, we
should still follow the same ownership semantics of the rest of the
function. Thus, free the skb in this codepath.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Matthew Maurer <mmaurer@google.com>
Fixes: 2a94fe48f3 ("genetlink: make multicast groups const, prevent abuse")
Link: https://lore.kernel.org/r/845b36ba-7b3a-41f2-acb2-b284f253e2ca@lunn.ch
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260506-genlmsg-return-v2-1-a63ee2a055d6@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NSH header length is a 6-bit field that encodes the total length of
the header in 4-byte words. So the maximum length is 0b111111 * 4,
which is 252 and not 256. The maximum context length is the same
number minus the length of the base header (8), so 244.
These macros are used to validate push_nsh() action in openvswitch.
Miscalculation here doesn't cause any real issues. In the worst case
the oversized context is truncated while building the header, so we'll
construct and send a broken packet, which is not a big problem, as any
receiver should validate the fields. No invalid memory accesses will
happen during the header push. But we should fix the macros to reject
the incorrect actions in the first place.
Using previously defined values and calculating the length instead
of defining numbers directly, so it's easier to understand where they
come from and harder to make a mistake.
Fixes: 1f0b7744c5 ("net: add NSH header structures and helpers")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260507120434.2962505-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I would like to hand over the macb maintenance to Théo, as I'm unable to
keep up with the recent flow of patches for this driver. After speaking
with Claudiu, he indicated that he is in the same position as me.
To help with this work, Conor has agreed to act as a reviewer.
I was given responsibility for this driver years ago, and I'm glad to
see it continue with talented developers.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260507120444.9733-1-nicolas.ferre@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When in irq deferral mode (defer-hard-irqs > 0), a short enough
gro-flush timeout can trigger before NAPI_STATE_SCHED is cleared if the
last poll in busy_poll_stop() takes too long. This can have the effect
of leaving the queue stuck with interrupts disabled and no timer armed
which results in a tx timeout if there is no subsequent busypoll cycle.
To prevent this, defer the gro-flush timer arm after the last poll.
Fixes: 7fd3253a7d ("net: Introduce preferred busy-polling")
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260506090808.820559-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maoyi Xie says:
====================
ipv6: flowlabel: per-netns budget for unprivileged callers
From: Maoyi Xie <maoyi.xie@ntu.edu.sg>
This series fixes the cross-tenant DoS in net/ipv6/ip6_flowlabel.c.
v1 through v6 were single-patch postings, each in its own thread.
v6 review pointed out that the existing fl_size read in
mem_check() and the corresponding write in fl_intern() are not in
the same critical section. v7 split the work into 2 patches.
Patch 1/2 is a prerequisite. It moves spin_lock_bh(&ip6_fl_lock)
and the matching unlock from fl_intern() into its only caller
ipv6_flowlabel_get(), so the mem_check() call runs under the same
critical section as the fl_intern() insert. With all writers and
the read of fl_size under the lock, fl_size is converted from
atomic_t to plain int. This is independent of the per-netns
budget. It also makes 2/2 backportable without conflicts.
Patch 2/2 is the v6 patch, rebased on 1/2.
- flowlabel_count is plain int rather than atomic_t, since the
previous patch put all writers and readers under ip6_fl_lock.
- In ip6_fl_gc(), fl_free() is now placed below the fl_size
and flowlabel_count decrements, removing the v6 cache of
fl->fl_net.
- In ip6_fl_purge(), fl_free() stays in its original position.
The function argument net is used for flowlabel_count.
- mem_check() uses spaces around the / operator on all four
expressions, addressing the checkpatch note in v6 review.
Numeric budget (preserved from v6):
pre-patch:
global non-CAP_NET_ADMIN budget = FL_MAX_SIZE - FL_MAX_SIZE/4
= 4096 - 1024 = 3072
per-actor reach = 3072
post-patch:
FL_MAX_SIZE doubled to 8192
global non-CAP_NET_ADMIN budget = 8192 - 2048 = 6144
per-netns ceiling = 6144 / 2 = 3072
per-actor reach = 3072 (preserved)
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
Reproducer (KASAN VM, 4 cores, qemu): unprivileged netns A holds
3072 flowlabels via 100 procs. Fresh unprivileged netns B then
allocates 32 flowlabels (the FL_MAX_PER_SOCK ceiling for one
socket), the same as a clean baseline. Without the per-netns
ceiling, netns A could push fl_size past FL_MAX_SIZE - FL_MAX_SIZE
/ 4 and netns B would see allocations denied.
====================
Link: https://patch.msgid.link/20260506082416.2259567-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl_size, fl_ht and ip6_fl_lock in net/ipv6/ip6_flowlabel.c are
file scope and shared across netns. mem_check() reads fl_size to
decide whether to deny non-CAP_NET_ADMIN callers. capable() runs
against init_user_ns, so an unprivileged user in any non-init
userns can push fl_size past FL_MAX_SIZE - FL_MAX_SIZE / 4 and
starve every other unprivileged userns on the host.
Add struct netns_ipv6::flowlabel_count, bumped and decremented
next to fl_size in fl_intern, ip6_fl_gc and ip6_fl_purge. The new
field fills the existing 4-byte hole after ipmr_seq, so struct
netns_ipv6 stays the same size on 64-bit builds.
Bump FL_MAX_SIZE from 4096 to 8192. It has been 4096 since the
file was added. Machines and connection counts have grown.
mem_check() folds an extra per-netns ceiling into the existing
non-CAP_NET_ADMIN conditional. The ceiling is half of the total
budget that unprivileged callers have ever been able to use, i.e.
(FL_MAX_SIZE - FL_MAX_SIZE / 4) / 2 = 3072 entries. With
FL_MAX_SIZE doubled, this preserves the original per-user reach
of 3K (what an unprivileged caller could already obtain before
this change), while forcing an attacker to spread allocations
across at least two netns to exhaust the global non-CAP_NET_ADMIN
budget.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
The previous patch took ip6_fl_lock across mem_check and
fl_intern, so the new flowlabel_count read in mem_check and the
new flowlabel_count++ in fl_intern run under the same critical
section. flowlabel_count is therefore plain int, like fl_size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-3-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mem_check() in net/ipv6/ip6_flowlabel.c reads fl_size without
holding ip6_fl_lock. fl_intern() takes the lock immediately
afterwards. The two checks therefore race against concurrent
fl_intern, ip6_fl_gc and ip6_fl_purge writers, which makes the
mem_check budget check approximate.
Move spin_lock_bh(&ip6_fl_lock) and the matching unlock from
fl_intern() into its only caller ipv6_flowlabel_get(). The
mem_check() call now runs under the same critical section as the
fl_intern() insert, so the budget check is exact.
With all writers and the read of fl_size under ip6_fl_lock,
convert fl_size from atomic_t to plain int. The four sites that
update or read fl_size are fl_intern (insert path), ip6_fl_gc
(garbage collector, the !sched check and the per-entry decrement),
ip6_fl_purge (per-netns purge), and mem_check (budget check), and
all four now run under ip6_fl_lock.
This is a prerequisite for adding a per-netns budget alongside
fl_size. The follow-up patch adds netns_ipv6::flowlabel_count and
folds it into mem_check().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It appears there's a need for a maintainer for the 3Com EtherLink III
family of Ethernet network adapters. There is documentation available
and the driver is very mature so the task ought to be of little hassle,
so I think I should be able to squeeze in any issues to be addressed.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/alpine.DEB.2.21.2604271056460.28583@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Two fixes for socket migration in reqsk_timer_handler().
The series fixes two bugs in the error path of socket migration
in reqsk_timer_handler().
Patch 1 fixes a potential UAF in reqsk_timer_handler().
Patch 2 fixes imbalanced icsk_accept_queue count.
====================
Link: https://patch.msgid.link/20260506035954.1563147-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration happens in reqsk_timer_handler(),
@sk_listener will be updated with the new listener.
When we call __inet_csk_reqsk_queue_drop(), the listener must
be the one stored in req->rsk_listener.
The cited commit accidentally replaced oreq->rsk_listener with
sk_listener, leading to imbalanced icsk_accept_queue count.
Let's pass the correct listener to __inet_csk_reqsk_queue_drop().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer.
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
Pull pmdomain fixes from Ulf Hansson:
- Fix detach procedure for virtual devices in genpd
- mediatek: Fix use-after-free in scpsys_get_bus_protection_legacy()
* tag 'pmdomain-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy()
pmdomain: core: Fix detach procedure for virtual devices in genpd
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
Fixes: 4d7c557f58 ("net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260506084614.192894-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260506014105.27093-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL;
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbdirect.h
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: misc. fixes for v7.1-rc3
Here are various fixes, mainly related to ADD_ADDRs:
- Patch 1: save ADD_ADDR for rtx with ID0 when needed. A fix for v6.1.
- Patch 2: remove unneeded exception for ID 0. A fix for v5.10.
- Patches 3-5: fix potential data-race and leaks during ADD_ADDR rtx. A
fix for v5.10.
- Patch 6: resched blocked ADD_ADDR rtx after a more appropriated
timeout, not after 15 seconds. A fix for v5.10.
- Patch 7: skip inactive subflows when when looking at the max RTO. A
fix for v6.18.
- Patch 8: avoid iterating over all subflows when there is no need to. A
fix for v6.18.
- Patch 9: skip closed subflows when looking at sending MP_PRIO. A fix
for v5.17.
- Patch 10: properly catch errors when using check_output() in the
selftests. A fix for v6.9.
- Patch 11: skip the 'unknown' flag test when 'ip mptcp' is used. A fix
for v6.10.
====================
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-0-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Fixes: 0cef6fcac2 ("selftests: mptcp: ip_mptcp option for more scripts")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
Fixes: 2d0c1d27ea ("selftests: mptcp: add mptcp_lib_check_output helper")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking at the maximum RTO amongst the subflows, inactive subflows
were taken into account: that includes stale ones, and the initial one
if it has been already been closed.
Unusable subflows are now simply skipped. Stale ones are used as an
alternative: if there are only stale ones, to take their maximum RTO and
avoid to eventually fallback to net.mptcp.add_addr_timeout, which is set
to 2 minutes by default.
Fixes: 30549eebc4 ("mptcp: make ADD_ADDR retransmission timeout adaptive")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-7-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-6-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding the ADD_ADDR to the list, the address including the IP, port
and ID are copied. On the other hand, when the endpoint corresponds to
the one from the initial subflow, the ID is set to 0, as specified by
the MPTCP protocol.
The issue is that the ID was reset after having copied the ID in the
ADD_ADDR entry. So the retransmission was done, but using a different ID
than the initial one.
Fixes: 8b8ed1b429 ("mptcp: pm: reuse ID 0 after delete and re-add")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-1-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_child_process( .. child ...) currently calls sock_put(child).
Unfortunately @child (named @nsk in callers) can be used after
this point to send a RST packet.
To fix this UAF, I remove the sock_put() from tcp_child_process()
and let the callers handle this after it is safe.
Remove @rsk variable in tcp_v4_do_rcv() and change tcp_v6_do_rcv()
so that both functions look the same.
Fixes: cfb6eeb4c8 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260505153927.3435532-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a lockless lookup over the inet_peer rbtree,
if a matching node is found, inet_getpeer() returns it immediately
without validating the seqlock sequence.
This missing check introduces a race condition:
Trigger Path: When a host receives an incoming fragmented IPv4 packet,
ip4_frag_init() (in net/ipv4/ip_fragment.c) calls inet_getpeer_v4()
to track the peer.
The Race: If the packet is from a new source IP, CPU A acquires the
write_seqlock, allocates a new inet_peer node (p), sets its IP address
(daddr), and links it to the rbtree (rb_link_node).
Uninitialized Access: Due to the lack of memory barriers between
rb_link_node and the initialization of the rest of the struct
(like refcount_set(&p->refcnt, 1)), CPU A can make the node visible
to readers before its refcnt is initialized.
This is especially true on weakly-ordered architectures like ARM64
where the CPU can reorder the memory stores.
Lockless Reader: Concurrently, CPU B processes a second fragmented packet
from the same source IP. CPU B does a lockless lookup, finds the newly
inserted node, and returns it immediately.
Use-After-Free (UAF): CPU B reads p->refcnt as uninitialized garbage
(left over from previous kmalloc-128/192 allocations).
If the garbage is > 0, refcount_inc_not_zero(&p->refcnt) succeeds.
CPU A then executes refcount_set(&p->refcnt, 1), overwriting CPU B's increment.
When CPU B finishes with the fragment queue, it calls inet_putpeer(),
which drops the refcount to 0 and frees the node via RCU.
The node is now freed but remains linked in the rbtree,
resulting in a Use-After-Free in the rbtree.
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260505133233.3039575-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka says:
====================
netdevsim: psp: fix init and uninit bugs
This series has three fixes. The first is a straightforward NULL
pointer dereference that is reachable by creating and destroying some
vfs on a kernel with INET_PSP enabled.
The last two patches deal with nsim_psp_rereg_write(), which is a
debugfs handler that reregisters netdevsim's psp_dev without
aquiescing and disabling tx/rx processing. This was added to enable
some tests in psp.py where a psp device is unregistered while it still
referenced by tcp socket state.
There are two issues with this code:
1. Calls to nsim_psp_uninit() are not properly serialized
2. netdevsim's psp_dev refcount can be released while nsim_do_psp() is
reading from it.
====================
Link: https://patch.msgid.link/20260505-psd-rcu-v1-0-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
