mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-09-13 01:52:36 -04:00
da1ea35fea67ad841f4ada28dd61b41be65e5437
28459 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
George Wilson
|
fb442a6673 |
powerpc/pseries: lparcfg - fix kbuf[] underflow
In lparcfg_write(), a count of 0 results in kbuf[] being indexed at -1.
Check for count == 0 in the existing check for count > sizeof(kbuf) and
return -EINVAL if true.
Fixes:
|
||
|
George Wilson
|
649c10bff5 |
powerpc/pseries: pci - logic bug
The checks on num_vfs in pseries_pci_sriov_enable() are ANDed where OR
was apparently intended. Change it to OR.
Fixes:
|
||
|
George Wilson
|
5b17f3f343 |
powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak
In papr_phy_attest_create_handle(), the params->cmd.length is not
validated before use, which can result in a buffer overlow. Check it and
return -EINVAL if it is either 0 or exceeds sizeof(params->cmd).
Also, params is freed on the success path but not error. Free it on
errors after memory allocation. And free it on negative fd.
Fixes:
|
||
|
Thorsten Blum
|
86f057c19f |
powerpc/serial: Fix include guard comment
Replace _PPC64_SERIAL_H with _ASM_POWERPC_SERIAL_H to match the actual macro name. Remove an empty comment while at it. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260623153825.403819-2-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
d71b3ca523 |
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
Replace the open-coded implementation with strstarts() to simplify is_thread_imc_pmu(). Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260704121353.201583-3-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
0bb024f11d |
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
If lv1_put_iopte() fails in dma_ioc0_map_pages(), the error path
decrements iopage but keeps using the failed mapping's offset. As a
result, it repeatedly tries to invalidate the failed IOPTE slot and
leaves the already installed IOPTEs valid.
Recompute offset and invalidate the installed IOPTEs instead.
Fixes:
|
||
|
Thorsten Blum
|
41bf83c1b1 |
powerpc/ps3: Remove unused struct table in setup_areas()
The local table structure is not used - remove it. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260713091731.97212-3-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
b24fc8278b |
powerpc/boot: Fix treeboot-akebono CPU node lookup check
fdt_node_offset_by_prop_value() returns a negative error code on
failure - fix the check accordingly.
Fixes:
|
||
|
Thorsten Blum
|
43863f6575 |
powerpc/boot: Fix treeboot-currituck CPU node lookup check
fdt_node_offset_by_prop_value() returns a negative error code on
failure - fix the check accordingly.
Fixes:
|
||
|
Thorsten Blum
|
c824ab6568 |
powerpc/boot: Fix simpleboot CPU node lookup check
fdt_node_offset_by_prop_value() returns a negative error code on
failure - fix the check accordingly.
Fixes:
|
||
|
Mukesh Kumar Chaurasiya (IBM)
|
263e5159e0 |
powerpc: Fix exit_flags field placement in pt_regs for ptrace
Commit |
||
|
Mukesh Kumar Chaurasiya (IBM)
|
bddf754009 |
powerpc/970: fix nap return address corruption on async interrupt exit
On PowerMac G5 (PPC970, CONFIG_PPC_970_NAP) the system panics shortly
after boot with symptoms including instruction fetch faults, kernel data
access faults, and stack corruption, predominantly on SMP and always
somewhere inside softirq processing.
The PPC970 idle path works by setting _TLF_NAPPING in the current
thread's local flags before entering the MSR_POW nap loop. When any
async interrupt wakes the CPU, nap_adjust_return() is expected to detect
_TLF_NAPPING, clear it, and rewrite regs->NIP to power4_idle_nap_return
so that the interrupt returns cleanly to the caller of power4_idle_nap()
rather than back into the nap spin loop.
DEFINE_INTERRUPT_HANDLER_ASYNC generates the following sequence:
irq_enter_rcu();
____func(regs); /* timer_interrupt / do_IRQ body */
irq_exit_rcu(); /* softirqs run here, irqs re-enabled */
arch_interrupt_async_exit_prepare(regs); /* nap_adjust_return was here */
irqentry_exit(regs, state);
irq_exit_rcu() calls invoke_softirq() -> do_softirq_own_stack(), which
runs softirqs with hardware interrupts re-enabled. A nested async
interrupt can therefore arrive while _TLF_NAPPING is still set. That
nested interrupt reaches nap_adjust_return() in its own
arch_interrupt_async_exit_prepare() call, finds _TLF_NAPPING set, and
redirects *its own* regs->NIP to power4_idle_nap_return. Returning via
that blr with an unrelated LR on the softirq stack jumps to a garbage
address, causing the observed crashes.
The comment that previously lived in arch_interrupt_async_exit_prepare()
even described this exact hazard ("must come before irq_exit()"), but
nap_adjust_return() was placed after irq_exit_rcu() in the macro, so
the protection was never effective.
Fix this by calling nap_adjust_return() inside DEFINE_INTERRUPT_HANDLER_ASYNC
immediately before irq_exit_rcu(), ensuring _TLF_NAPPING is cleared and
regs->NIP is adjusted before any code that can re-enable interrupts or
invoke softirqs runs. Move the explanatory comment into
nap_adjust_return() itself and remove it from arch_interrupt_async_exit_prepare().
Fixes:
|
||
|
Vaibhav Jain
|
8f45abd50a |
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
During pSeries_setup_arch(), VPA for boot-cpu is first to be initialized. However later in the boot, smp_setup_cpu() is called for setting up VPA on boot and secondary cpus that were brought online. This results in vpa_init() being called twice for boot-cpu and three redundant H_REGISTER_VPA hcalls being made to the hypervisor. Fix this by adding an extra condition in smp_set_cpu() to call vpa_init() only on non boot-cpus. Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260708015842.274690-1-vaibhav@linux.ibm.com |
||
|
Vaibhav Jain
|
810d07fb4c |
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
Currently pseries_kexec_cpu_down() skips unregistering vpa, slb_shadow and dtl areas during a crash and kexec shutdown path. It was done to avoid doing an HCALL while crashing. However recently Anushree reported that during kernel crash while the kdump kernel was coming up, Hypervisor reported invalid values for 'vpa.yield_count' while it dispatching L2-KVM Guest vcpus. The error manifested as debug build Hypervisor assert triggering to indicate possible VPA corruption. Looking at the kexec cpu offline path it was discovered that during crash kernel doesn't unregister the VPA/SLB-Shadow/DTL area with Hypervisor. Instead it re-allocates and re-registers these areas for cpus during boot. During kexec boot the previously allocated areas can get overwritten with new content without hypervisor knowledge. This creates a small window where while kexec kernel boots and the L2-VCPUs are being dispatched, Hypervisor may try to read/write to a wrong memory area which previously belonged to older VPA. Fix this possible race and memory corruption by updating pseries_kexec_cpu_down() to also unregister vpa,slb_shadow & dtl areas during a kernel crash. Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260708015802.274271-1-vaibhav@linux.ibm.com |
||
|
Christophe Leroy (CS GROUP)
|
a2c02aa0c6 |
powerpc: Remove dead non-preemption code
Since commit |
||
|
Amit Machhiwal
|
e4de1b9cb3 |
powerpc/dt_cpu_ftrs: Set CPU_FTR_P11_PVR for Power11 and later processors
When using device tree CPU features (dt-cpu-ftrs), the kernel bypasses
the traditional cputable-based CPU identification and instead derives
CPU features from the device tree's "ibm,powerpc-cpu-features" node
provided by firmware.
However, CPU_FTR_P11_PVR is a kernel-internal feature flag used to
identify Power11 and later processors, and is not represented in the
device tree's ISA feature set. While ISA v3.1 support (indicated by
CPU_FTR_ARCH_31) is present on both Power10 and Power11, the
CPU_FTR_P11_PVR flag is specifically needed by code that must
distinguish between Power10 and Power11 processors.
Without this flag set, code that checks for Power11 using
cpu_has_feature(CPU_FTR_P11_PVR) will incorrectly return false on
Power11+ systems using dt-cpu-ftrs, leading to incorrect behavior.
This issue manifests specifically in powernv environments (bare-metal
or QEMU TCG with powernv machine type), where skiboot/OPAL firmware
provides the "ibm,powerpc-cpu-features" node, causing the kernel to
use dt-cpu-ftrs. The issue does not affect pseries guests, where SLOF
firmware does not provide this node, causing the kernel to fall back
to the traditional cputable path (identify_cpu) which correctly sets
CPU_FTR_P11_PVR during PVR-based CPU identification.
In powernv TCG guests, the missing flag causes KVM code to trigger
warnings when attempting to create KVM guests, as cpu_features shows
0x000c00eb8f4fb187 (missing bit 53) instead of the correct
0x002c00eb8f4fb187 (with bit 53 set).
Fix this by setting CPU_FTR_P11_PVR for all processors with
PVR >= PVR_POWER11 when ISA v3.1 support is detected in
cpufeatures_setup_start(). This approach ensures forward
compatibility with future processor generations.
Fixes:
|
||
|
Thorsten Blum
|
bd83c98b98 |
powerpc/pseries: fix memory leak on krealloc failure in papr_init
When krealloc() fails, free the original esi_buf before returning to
avoid a memory leak.
Fixes:
|
||
|
Ethan Nelson-Moore
|
d610d3ab18 |
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
mask_user_address() incorrectly checks for CONFIG_E500 instead of CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on E500 hardware. Fix the check to use the correct name. Fixes: |
||
|
Shrikanth Hegde
|
c1c1ffa490 |
powerpc/vtime: Initialize starttime at boot for native accounting
It was observed that /proc/stat had very large value for one ore more
CPUs. It was more visible after recent code simplifications around
cpustats.
System has 240 CPUs.
cat /proc/uptime;
194.18 46500.55
cat /proc/stat
cpu 5966 39 837032887 4650070 164 185 100 0 0 0
cpu0 108 0 837030890 19109 24 4 23 0 0 0
Since uptime is 194s, system time of each CPU can't be more than 19400.
Sum of system time of all CPUs can't be more than 19400*240 4656000.
In fact huge value is close to mftb(). Note mftb doesn't reset on powerVM
when the LPAR restart. It only resets when whole system resets. The same
issue exists for kexec too.
This happens since starttime is not setup at init time. Once it is set
then subsequent vtime_delta will return the right delta.
Fix it by initializing the starttime during CPU initialization. This
fixes the large times seen.
cat /proc/uptime; cat /proc/stat
15.78 3694.63
cpu 6035 35 1347 369479 23 144 49 0 0 0
cpu0 19 0 38 1508 0 1 14 0 0 0
Now, system time is reported as expected.
Fixes:
|
||
|
Rosen Penev
|
25957f7c3d |
powerpc/85xx: Add fsl,ifc to common device ids
Add fsl,ifc to mpc85xx_common_ids so that of_platform_bus_probe
creates a platform device for the IFC node even without 'simple-bus'
in its compatible property. On P1010 and similar platforms the IFC
node is a direct child of the root, so it must be explicitly matched
to be populated.
Fixes:
|
||
|
Junrui Luo
|
47b87f469a |
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault().
Fixes:
|
||
|
Gautam Menghani
|
fe179677b6 |
powerpc/pseries/Kconfig: Enable CONFIG_VPA_PMU to be used with KVM
Currently, CONFIG_VPA_PMU is not enabled by default, and consequently cannot be used for KVM guests at all, unless explicitly enabled on host kernel. Mark CONFIG_VPA_PMU as "default m" to ensure it is available when KVM is being used. Cc: stable@vger.kernel.org # v6.13+ Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Gautam Menghani <gautam@linux.ibm.com> [Maddy: Changed tag order] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260615091120.84169-1-gautam@linux.ibm.com |
||
|
Linus Torvalds
|
d2c9a99135 |
Merge tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull mod_devicetable.h header split from Uwe Kleine-König:
"Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
|
||
|
Uwe Kleine-König (The Capable Hub)
|
995832b2ce |
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace the #include of <linux/mod_devicetable.h> by the more specific <linux/device-id/*.h> where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> |
||
|
Pawan Gupta
|
0bb99f2cfa |
bpf: Restrict JIT predictor flush to cBPF
Currently predictor flush on memory reuse is done for all BPF JIT allocations, but only cBPF programs can be loaded by an unprivileged user. eBPF is privileged by default, and flushing predictors for all CPUs on every eBPF reuse penalizes the common case for no security benefit. eBPF allocations can be frequent on busy systems, only flush predictors for cBPF programs. Trampoline and dispatcher allocations also skip the flush as they are eBPF-only. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Linus Torvalds
|
26ae421f7f |
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
||
|
Bjorn Helgaas
|
8b3a73b4fe |
Merge branch 'pci/sysfs'
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
|
||
|
Krzysztof Wilczyński
|
4e14b965a6 |
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
Currently, legacy_io and legacy_mem are dynamically allocated and created by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the attributes at runtime on Alpha to rename them and shift the size for sparse addressing. Convert to four static const attributes (legacy_io, legacy_io_sparse, legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use pci_legacy_has_sparse() to select the appropriate variant per bus. The sizes are compile-time constants and .size is set directly on each attribute. Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the driver model handles creation and removal automatically. Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the dynamic creation is no longer needed. Remove the __weak pci_adjust_legacy_attr(), Alpha's override, and its declaration from both Alpha and PowerPC asm/pci.h headers. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org |
||
|
Ilpo Järvinen
|
79a648209d |
PCI: Make pci_sriov_resource_alignment() pci_dev const
pci_sriov_resource_alignment() inputs struct pci_dev which it should not need to alter to calculate alignment. Make pci_dev pci_sriov_resource_alignment() inputs const. It requires making pci_iov_resource_size() input const as well. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo Järvinen
|
9f331c50b3 |
powerpc/pseries: Make pseries_get_iov_fw_value() & pnv_iov_get() pci_dev const
Convert input pci_dev for pseries_get_iov_fw_value() and pnv_iov_get() to const to be able to convert pcibios_iov_resource_alignment() as well in an upcoming change. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260429122617.7324-7-ilpo.jarvinen@linux.intel.com |
||
|
Linus Torvalds
|
0000d9ccbc |
Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH: "Here is the big set of char, misc, iio, fpga, and other small driver subsystems changes for 7.2-rc1. Lots of little stuff in here, the majority being of course the IIO driver updates, as a list they are: - IIO driver updates and additions - GPIB driver bugfixes and cleanups - Android binder driver updates (rust and C version) - counter driver updates - MHI driver updates - mei driver updates - w1 driver updates - interconnect driver updates - Comedi driver fixes and updates - some obsolete char drivers removed (applicom and dtlk) - hwtracing driver updates - other tiny driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) w1: ds2482: Use named initializers for arrays of i2c_device_data firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure iio: chemical: scd30: Replace manual locking with RAII locking iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle() iio: dac: ad5686: create bus ops struct iio: dac: ad5686: cleanup doc header of local structs iio: dac: ad5686: add control_sync() for single-channel devices iio: dac: ad5686: add helpers to handle powerdown masks iio: dac: ad5686: add of_match table to the spi driver iio: dac: ad5686: drop enum id iio: dac: ad5686: remove redundant register definition iio: dac: ad5686: refactor include headers iio: adc: ad4080: fix AD4880 chip ID iio: light: veml3328: add support for new device dt-bindings: iio: light: veml6030: add veml3328 fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() ... |
||
|
Linus Torvalds
|
8a500fd093 |
Merge tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 7.2-rc1. Overall we end up removing more code than added, due to an obsolete synclink_gt driver being removed from the tree, always a nice thing to see happen. Other than that driver removal, major things included in here are: - max310x serial driver updates and fixes - 8250 driver updates and rework in places to make it more "modern" - dts file updates - serial driver core tweaks and updates - vt code cleanups - vc_screen crash fixes - other minor driver updates and cleanups All of these have been in linux-next for well over a week with no reported issues" * tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits) serial: 8250_pci: Don't specify conflicting values to pci_device_id members vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width() serial: 8250: fix possible ISR soft lockup dt-bindings: serial: rs485: remove deprecated .txt binding stub serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial tty: serial: Use named initializers for arrays of i2c_device_data serial: 8250_dw: remove clock-notifier infrastructure serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails amba/serial: amba-pl011: Bring back zx29 UART support serial: 8250: Add support for console flow control serial: 8250: Check LSR timeout on console flow control serial: 8250: Set cons_flow on port registration tty: serial: 8250: protect against NULL uart->port.dev in register arm64: dts: add support for A9 based Amlogic BY401 dt-bindings: arm: amlogic: add A311Y3 support serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled serial: qcom-geni: Avoid probing debug console UART without console support serial: max310x: add comments for PLL limits ... |
||
|
Linus Torvalds
|
1a3746ccbb |
Merge tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strncpy removal from Kees Cook:
- Remove the per-arch strncpy implementations in alpha, m68k, powerpc,
x86, and xtensa
- Remove strncpy API
Over the last 6 years working on strncpy removal there were 362
commits by 70 contributors. Folks with more than 1 commit were:
211 Justin Stitt <justinstitt@google.com>
22 Xu Panda <xu.panda@zte.com.cn>
21 Kees Cook <kees@kernel.org>
17 Thorsten Blum <thorsten.blum@linux.dev>
12 Arnd Bergmann <arnd@arndb.de>
4 Pranav Tyagi <pranav.tyagi03@gmail.com>
4 Lee Jones <lee@kernel.org>
2 Steven Rostedt <rostedt@goodmis.org>
2 Sam Ravnborg <sam@ravnborg.org>
2 Marcelo Moreira <marcelomoreira1905@gmail.com>
2 Krzysztof Kozlowski <krzk@kernel.org>
2 Kalle Valo <kvalo@kernel.org>
2 Jaroslav Kysela <perex@perex.cz>
2 Daniel Thompson <danielt@kernel.org>
2 Andrew Lunn <andrew@lunn.ch>
* tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strncpy() from the kernel
xtensa: Remove arch-specific strncpy() implementation
x86: Remove arch-specific strncpy() implementation
powerpc: Remove arch-specific strncpy() implementation
m68k: Remove arch-specific strncpy() implementation
alpha: Remove arch-specific strncpy() implementation
|
||
|
Linus Torvalds
|
a552c81ff4 |
Merge tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
||
|
Linus Torvalds
|
91981f96d2 |
Merge tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Enable GENERIC_ENTRY feature
- Add missing property in DTS for mpc83xx platform
- Enable building of DTB based on platfrom Kconfig
- Add powerpc64 JIT support for timed may_goto
- Add timeout to RTAS busy-wait loops
- Simplify cpumask api usage for cpuinfo display
- implement get_direction() in cpm1 (8xx platform)
- MAINTAINERS file update for power VMX AES entries
- Fixes to handle preempt count
- Restore KUAP registers on syscall restart exit
- define MIN_RMA in bytes rather than MB
- misc fixes and cleanups
Thanks to Aboorva Devarajan, Adriano Vero, Amit Machhiwal, Anushree
Mathur, Bartosz Golaszewski, Christophe Leroy (CS GROUP), David Gow,
Jinjie Ruan, J. Neuschäfer, Linus Walleij, Mahesh Salgaonkar, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Saket Kumar Bhaskar,
Samir M, Sayali Patil, Shirisha G, Shivang Upadhyay, Shrikanth Hegde,
Sourabh Jain, Thorsten Blum, Venkat Rao Bagalkote, and Yury Norov.
* tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (32 commits)
powerpc/fadump: define MIN_RMA in bytes rather than MB
powerpc: Restore KUAP registers on syscall restart exit
powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus
powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
powerpc/boot: Allow text relocations for pseries wrapper with binutils 2.46+
powerpc: Simplify access_ok()
powerpc/entry: Disable interrupts before irqentry_exit
powerpc/8xx: implement get_direction() in cpm1
powerpc/pseries/lparcfg: Replace deprecated strcpy in parse_system_parameter_string
powerpc: Fix indentation and replace typedef with struct name
powerpc/rtas: Replace one-element array with flexible array member
powerpc: use sysfs_emit{_at} in sysfs show functions
MAINTAINERS: powerpc: update VMX AES entries
ppc/fadump: invoke kmsg_dump in fadump panic path
powerpc/xive: Add warning if target CPU not found
powerpc/perf: Use cpumask_intersects api for checking disable path
powerpc: Simplify cpumask api usage for cpuinfo display
powerpc: Use cpumask_next_wrap instead
powerpc/fadump: Add timeout to RTAS busy-wait loops
...
|
||
|
Kees Cook
|
7eda356658 |
powerpc: Remove arch-specific strncpy() implementation
strncpy() has no remaining callers in the kernel[1]. Remove the powerpc-specific assembly implementation from both the kernel (arch/powerpc/lib/string.S) and the boot wrapper (arch/powerpc/boot/string.S), along with the __HAVE_ARCH_STRNCPY define and declaration, falling back to the generic version in lib/string.c. The boot wrapper's strncpy had no callers in arch/powerpc/boot/. Link: https://github.com/KSPP/linux/issues/90 [1] Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
9c87e61e3c |
Merge tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
||
|
Linus Torvalds
|
b85966adbf |
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
||
|
Jakub Kicinski
|
8a398a0c18 |
appletalk: move the protocol out of tree
AppleTalk has been removed in MacOS X 10.6 (Snow Leopard), in 2009, according to Wikipedia. We recently got a burst of AI generated fixes to this protocol which nobody is reviewing. Let AppleTalk follow AX.25 and hamradio out of the Linux tree. We we will maintain the code at: github.com/linux-netdev/mod-orphan for anyone interested in playing with it. Retain the uAPI for now. No strong reason, simply because I suspect keeping it will be less controversial. Acked-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://patch.msgid.link/20260615222935.947233-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sayali Patil
|
42f252f5a6 |
powerpc/fadump: define MIN_RMA in bytes rather than MB
The MIN_RMA size checks in fadump_setup_param_area() use (MIN_RMA * 1024 * 1024), which is evaluated in int and can overflow when MIN_RMA is increased to values such as SZ_2G, triggering compiler warnings such as: warning: integer overflow in expression of type 'int' results in '0' [-Woverflow] Define MIN_RMA directly in bytes using SZ_1M and update the callers accordingly. This avoids repeated unit conversions and prevents integer overflow. Also convert MIN_RMA back to MB when populating the firmware architecture vector, since firmware expects the value in MB. Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Sayali Patil <sayalip@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/310b040acef712fdc79e3e37d0f4c2213938b556.1781589284.git.sayalip@linux.ibm.com |
||
|
Mukesh Kumar Chaurasiya (IBM)
|
4e1187e12d |
powerpc: Restore KUAP registers on syscall restart exit
During a syscall restart, block KUAP so that pending interrupts can be
replayed. The original KUAP state is not restored before returning to
userspace, causing subsequent userspace accesses to fault and eventually
trigger bad_access_pkey(), crashing the kernel.
The original KUAP register values are already saved in
arch_enter_from_user_mode(). Restore them on the syscall restart exit
path before returning to userspace.
Fixes:
|
||
|
Linus Torvalds
|
0d8c113493 |
Merge tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
||
|
Linus Torvalds
|
bd77e50c9a |
Merge tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
||
|
Linus Torvalds
|
80476f22b8 |
Merge tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
|
||
|
Aboorva Devarajan
|
5c86f1c1f9 |
powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus
kexec_prepare_cpus_wait() calls get_cpu() internally to obtain the
current CPU id. kexec_prepare_cpus() calls kexec_prepare_cpus_wait()
twice -- once for KEXEC_STATE_IRQS_OFF and once for
KEXEC_STATE_REAL_MODE -- but only issues a single put_cpu() at the end,
leaving preempt_count elevated by one extra nesting level.
In practice the imbalance does not trigger a 'scheduling while atomic'
splat because the kexec path is a one-way trip: IRQs are already
disabled, no schedule() occurs after the leak, and
default_machine_kexec() overwrites preempt_count with HARDIRQ_OFFSET
before jumping into kexec_sequence() which never returns. However the
bookkeeping is still wrong.
kexec_prepare_cpus() calls local_irq_disable()/hard_irq_disable()
before invoking kexec_prepare_cpus_wait(), so the CPU is already pinned
and the get_cpu()/put_cpu() preempt_disable() bracketing is unnecessary.
Only the current CPU id is needed, so replace get_cpu() with
raw_smp_processor_id() and drop the now-unneeded put_cpu().
Fixes:
|
||
|
Aboorva Devarajan
|
0ecd26e93e |
powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down
pnv_kexec_wait_secondaries_down() calls get_cpu() to obtain the current
CPU id but never calls the matching put_cpu(), leaking one
preempt_disable() nesting level on every invocation.
In practice the imbalance does not trigger a visible splat because the
kexec teardown path is a one-way trip: IRQs are already disabled, no
schedule() occurs after the leak, and default_machine_kexec() overwrites
preempt_count with HARDIRQ_OFFSET before jumping into kexec_sequence()
which never returns. However the bookkeeping is still wrong.
The function only needs the current CPU id, and this path runs with
interrupts disabled and the CPU pinned, so the preempt_disable()
side-effect of get_cpu() is unnecessary. Replace it with
raw_smp_processor_id().
Fixes:
|
||
|
Aboorva Devarajan
|
81e3a86030 |
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable.
Fixes:
|
||
|
Amit Machhiwal
|
97f902dd4c |
powerpc/boot: Allow text relocations for pseries wrapper with binutils 2.46+
Binutils 2.46 changed the default linker behavior from '-z notext' to
'-z text', which treats dynamic relocations in read-only segments as
errors rather than warnings. This causes the pseries boot wrapper build
to fail with:
/usr/bin/ld.bfd: arch/powerpc/boot/wrapper.a(crt0.o): warning:
relocation against `_platform_stack_top' in read-only section `.text'
/usr/bin/ld.bfd: error: read-only segment has dynamic relocations
The pseries wrapper uses '-pie' to create position-independent code.
However, crt0.S contains a pointer to '_platform_stack_top' in the .text
section, which requires a dynamic relocation at runtime. This creates
DT_TEXTREL (text relocations), which were allowed by default in binutils
2.45 and earlier (via implicit '-z notext') but are now rejected by
binutils 2.46+.
Add '-z notext' linker flag to explicitly allow text relocations for
the pseries platform, similar to what is already done for the epapr
platform. This restores the previous behavior and allows the boot
wrapper to build successfully with binutils 2.46+.
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260525161601.32097-1-amachhiw@linux.ibm.com
|
||
|
Linus Torvalds
|
2cbf335f8c |
Merge tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
||
|
Linus Torvalds
|
186d3c4e92 |
Merge tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner: - Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting the remaining users over. - Rework and sanitize the MIPS VDSO handling, so it does not handle the time related VDSO if there is no VDSO capable clocksource available. Also stop mapping VDSO data pages unconditionally even if there is no usage possible. * tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY MIPS: VDSO: Gate microMIPS restriction on GCC version MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available MIPS: VDSO: Only map the data pages when the vDSO is used MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY vdso/datastore: Always provide symbol declarations MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data() vdso/treewide: Drop GENERIC_TIME_VSYSCALL vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks |