How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long. But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.
Fix this by getting rid of the ternary.
Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda
Fixes: 8cb7cf56c9 ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Having added the support for SCMI protocols as modules in order to let
vendors extend the SCMI core with their own additions it seems odd to
then force SCMI drivers built on top to use a static device table to
declare their devices since this way any new SCMI drivers addition
would need the core SCMI device table to be updated too.
Remove the static core device table and let SCMI drivers to simply declare
which device/protocol pair they need at initialization time: the core will
then take care to generate such devices dynamically during platform
initialization or at module loading time, as long as the requested
underlying protocol is defined in the devicetree.
Link: https://lore.kernel.org/r/20210316124903.35011-39-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add new core SCMI transfer operations based on protocol handles to
enable protocols to builds and send their own protocol specific messages.
Keep old original scmi_xfer_ operations interface as wrappers around the
new interface in order to let coexist old and new interfaces to ease
protocol by protocol migration.
In order to support such migration the above wrappers and some
additional transient code is also introduced in this commit. It will be
later removed as a whole once the full migration of protocols and SCMI
drivers will have been completed.
Link: https://lore.kernel.org/r/20210316124903.35011-9-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Convert all refactored events registration routines to use protocol
handles.
In order to maintain bisectability and to allow protocols and drivers
to be later ported to the new protocol handle interface one by one,
introduce here also some transient code that will be removed later
in order to ease such transition.
Link: https://lore.kernel.org/r/20210316124903.35011-8-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a new refactored protocol events registration helper and invoke it
from the centralized initialization process triggered by get_ops() and
friends.
Also add a `get_num_sources` as a new optional callback amongst protocol
events operations. Finally remove events registration call-sites from
within the legacy protocol init routines.
Link: https://lore.kernel.org/r/20210316124903.35011-7-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add basic protocol handles definitions and private data helpers.
A protocol handle identifies a protocol instance initialized against a
specific handle, it embeds all the references to the core SCMI transfer
methods that will be needed by a protocol implementation to build and
send its own protocol specific messages using common core methods.
As such, in the interface, a protocol handle will be passed down from
the core to the protocol specific initialization callback at init time.
Anyways, at this point only definitions are introduced, all protocols
initialization code and SCMI drivers probing is still based on the old
interface, so no functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-3-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Extend common protocol registration routines and provide some new generic
protocols get/put helpers that can track protocols usage and automatically
perform the proper initialization and de-initialization on demand when
required.
Convert all standard protocols to use this new registration scheme while
keeping them all still using the usual initialization logic bound to SCMI
devices probing.
Link: https://lore.kernel.org/r/20210316124903.35011-2-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).
It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.
In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.
To restore correct functionality, retrieve information of CPUs under the
same performance domain from operating-points-v2 in DT, and pass it on to
EM.
Link: https://lore.kernel.org/r/20210218222326.15788-3-nicola.mazzucato@arm.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull rdma fixes from Jason Gunthorpe:
"Nothing special here, though Bob's regression fixes for rxe would have
made it before the rc cycle had there not been such strong winter
weather!
- Fix corner cases in the rxe reference counting cleanup that are
causing regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
RDMA/rxe: Fix missed IB reference counting in loopback
RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
RDMA/mlx5: Set correct kernel-doc identifier
IB/mlx5: Add missing error code
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
Pull block fixes from Jens Axboe:
- NVMe fixes:
- more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
Terjan)
- fix a hwmon error return (Daniel Wagner)
- fix the keep alive timeout initialization (Martin George)
- ensure the model_number can't be changed on a used subsystem
(Max Gurtovoy)
- rsxx missing -EFAULT on copy_to_user() failure (Dan)
- rsxx remove unused linux.h include (Tian)
- kill unused RQF_SORTED (Jean)
- updated outdated BFQ comments (Joseph)
- revert work-around commit for bd_size_lock, since we removed the
offending user in this merge window (Damien)
* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
nvmet: model_number must be immutable once set
nvme-fabrics: fix kato initialization
nvme-hwmon: Return error code when registration fails
nvme-pci: add quirks for Lexar 256GB SSD
nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
rsxx: Return -EFAULT if copy_to_user() fails
block/bfq: update comments and default value in docs for fifo_expire
rsxx: remove unused including <linux/version.h>
block: Drop leftover references to RQF_SORTED
block: revert "block: fix bd_size_lock use"
Pull io_uring fixes from Jens Axboe:
"A bit of a mix between fallout from the worker change, cleanups and
reductions now possible from that change, and fixes in general. In
detail:
- Fully serialize manager and worker creation, fixing races due to
that.
- Clean up some naming that had gone stale.
- SQPOLL fixes.
- Fix race condition around task_work rework that went into this
merge window.
- Implement unshare. Used for when the original task does unshare(2)
or setuid/seteuid and friends, drops the original workers and forks
new ones.
- Drop the only remaining piece of state shuffling we had left, which
was cred. Move it into issue instead, and we can drop all of that
code too.
- Kill f_op->flush() usage. That was such a nasty hack that we had
out of necessity, we no longer need it.
- Following from ->flush() removal, we can also drop various bits of
ctx state related to SQPOLL and cancelations.
- Fix an issue with IOPOLL retry, which originally was fallout from a
filemap change (removing iov_iter_revert()), but uncovered an issue
with iovec re-import too late.
- Fix an issue with system suspend.
- Use xchg() for fallback work, instead of cmpxchg().
- Properly destroy io-wq on exec.
- Add create_io_thread() core helper, and use that in io-wq and
io_uring. This allows us to remove various silly completion events
related to thread setup.
- A few error handling fixes.
This should be the grunt of fixes necessary for the new workers, next
week should be quieter. We've got a pending series from Pavel on
cancelations, and how tasks and rings are indexed. Outside of that,
should just be minor fixes. Even with these fixes, we're still killing
a net ~80 lines"
* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
io_uring: don't restrict issue_flags for io_openat
io_uring: make SQPOLL thread parking saner
io-wq: kill hashed waitqueue before manager exits
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
io_uring: don't keep looping for more events if we can't flush overflow
io_uring: move to using create_io_thread()
kernel: provide create_io_thread() helper
io_uring: reliably cancel linked timeouts
io_uring: cancel-match based on flags
io-wq: ensure all pending work is canceled on exit
io_uring: ensure that threads freeze on suspend
io_uring: remove extra in_idle wake up
io_uring: inline __io_queue_async_work()
io_uring: inline io_req_clean_work()
io_uring: choose right tctx->io_wq for try cancel
io_uring: fix -EAGAIN retry with IOPOLL
io-wq: fix error path leak of buffered write hash map
io_uring: remove sqo_task
io_uring: kill sqo_dead and sqo submission halting
io_uring: ignore double poll add on the same waitqueue head
...
