In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge
in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in
rxe_dma_info are actually used by the rxe kernel driver.
The userspace would set these values, but the kernel never read them.
This change has no affect on the current ABI and new or old versions of
rdma-core operate correctly with new or old versions of the kernel rxe
driver.
Link: https://lore.kernel.org/r/20220913222716.18335-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For mlx5 if ATS is enabled in the PCI config then the device will use ATS
requests for only certain DMA operations. This has to be opted in by the
SW side based on the mkey or umem settings.
ATS slows down the PCI performance, so it should only be set in cases when
it is needed. All of these cases revolve around optimizing PCI P2P
transfers and avoiding bad cases where the bus just doesn't work.
Link: https://lore.kernel.org/r/4-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is modeled after the similar EFA enablement in commit
66f4817b57 ("RDMA/efa: Add support for dmabuf memory regions").
Like EFA there is no support for revocation so we simply call the
ib_umem_dmabuf_get_pinned() to obtain a umem instead of the normal
ib_umem_get(). Everything else stays the same.
Link: https://lore.kernel.org/r/3-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This uses the same passing protocol as UVERBS_ATTR_FD (eg len = 0 data_s64
= fd), except that the FD is not required to be a uverbs object and the
core code does not covert the FD to an object handle automatically.
Access to the int fd is provided by uverbs_get_raw_fd().
Link: https://lore.kernel.org/r/2-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe0 ("RDMA/rxe: Add memory barriers to kernel queues")
Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes: 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In inter-subnet cases, when inbound/outbound PRs are available,
outbound_PR.dlid is used as the requestor's datapath DLID and
inbound_PR.dlid is used as the responder's DLID. The inbound_PR.dlid
is passed to responder side with the "ConnectReq.Primary_Local_Port_LID"
field. With this solution the PERMISSIVE_LID is no longer used in
Primary Local LID field.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/b3f6cac685bce9dde37c610be82e2c19d9e51d9e.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support receiving inbound and outbound IB path records (along with GMP
PathRecord) from user-space service through the RDMA netlink channel.
The LIDs in these 3 PRs can be used in this way:
1. GMP PR: used as the standard local/remote LIDs;
2. DLID of outbound PR: Used as the "dlid" field for outbound traffic;
3. DLID of inbound PR: Used as the "dlid" field for outbound traffic in
responder side.
This is aimed to support adaptive routing. With current IB routing
solution when a packet goes out it's assigned with a fixed DLID per
target, meaning a fixed router will be used.
The LIDs in inbound/outbound path records can be used to identify group
of routers that allow communication with another subnet's entity. With
them packets from an inter-subnet connection may travel through any
router in the set to reach the target.
As confirmed with Jason, when sending a netlink request, kernel uses
LS_RESOLVE_PATH_USE_ALL so that the service knows kernel supports
multiple PRs.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/2fa2b6c93c4c16c8915bac3cfc4f27be1d60519d.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Delay QP destroy completion until all siw references to QP are
dropped. The calling RDMA core will free QP structure after
successful return from siw_qp_destroy() call, so siw must not
hold any remaining reference to the QP upon return.
A use-after-free was encountered in xfstest generic/460, while
testing NFSoRDMA. Here, after a TCP connection drop by peer,
the triggered siw_cm_work_handler got delayed until after
QP destroy call, referencing a QP which has already freed.
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920082503.224189-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object.
Notice that srp_rsp[] is a pointer to a structure that contains
flexible-array member data[]:
struct srp_rsp {
...
__be32 sense_data_len;
__be32 resp_data_len;
u8 data[];
};
link: https://github.com/KSPP/linux/issues/201
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220909022943.8896-1-hbh25y@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A number of asynchronous event (AE) ids were not aligned to the
correct flush_code and event_type. Fix these up so that the
correct IBV error and event codes are returned to application.
Also, add handling for new AE ids like IRDMA_AE_INVALID_REQUEST to
return the correct WC error code.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
