On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
The `ttm_resource_manager_usage()` function currently assumes `man->bdev` is non-NULL when accessing `man->bdev->lru_lock`.
However, in scenarios where the resource manager is not fully initialized (e.g., APU platforms that lack dedicated VRAM, or incomplete manager setup),
`man->bdev` may remain NULL. This leads to a NULL pointer dereference when attempting to acquire the `lru_lock`, triggering kernel OOPS.
Fix this by adding an explicit safety check for `man->bdev` before accessing its members:
- Use `WARN_ON_ONCE(!man->bdev)` to emit a one-time warning (a soft assertion) when `man->bdev` is NULL. This helps catch invalid usage patterns during debugging without breaking production workflows.
- Return 0 immediately if `man->bdev` is NULL, as a non-initialized manager cannot have valid resource usage to report.
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://lore.kernel.org/r/20251013085849.1735612-1-Jesse.Zhang@amd.com
In normal operation, a registered exec queue is disabled and
deregistered through the GuC, and freed only after the GuC confirms
completion. However, if the driver is forced to unbind while the exec
queue is still running, the user may call exec_destroy() after the GuC
has already been stopped and CT communication disabled.
In this case, the driver cannot receive a response from the GuC,
preventing proper cleanup of exec queue resources. Fix this by directly
releasing the resources when GuC is not running.
Here is the failure dmesg log:
"
[ 468.089581] ---[ end trace 0000000000000000 ]---
[ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535)
[ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535
[ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1
[ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1)
[ 468.092716] ------------[ cut here ]------------
[ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe]
"
v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled().
As CT may go down and come back during VF migration.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251010172529.2967639-2-shuicheng.lin@intel.com
(cherry picked from commit 9b42321a02)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Moving to VRAM will fail if mixed mappings are present or if the page is
already located in VRAM. Atomic faults that require a move to VRAM
currently retry without attempting to evict mixed mappings or locate
existing VRAM mappings.
This patch fixes the issue by attempting to evict mixed mappings or find
existing VRAM pages when a move to VRAM fails during atomic fault
handling.
Fixes: a9ac0fa455 ("drm/xe: Strict migration policy for atomic SVM faults")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251009130629.3531962-1-matthew.brost@intel.com
(cherry picked from commit 75188605c5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 45e33f220f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Using 2M pages in xe_migrate_vram has two benefits: we issue fewer
instructions per 2M copy (1 vs. 512), and the cache hit rate should be
higher. This results in increased copy engine bandwidth, as shown by
benchmark IGTs.
Enable 2M pages by reserving PDEs in the migrate VM and using 2M pages
in xe_migrate_vram if the DMA address order matches 2M.
v2:
- Reuse build_pt_update_batch_sram (Stuart)
- Fix build_pt_update_batch_sram for PAGE_SIZE > 4K
v3:
- More fixes for PAGE_SIZE > 4K, align chunk, decrement chunk as needed
- Use stack incr var in xe_migrate_vram_use_pde (Stuart)
v4:
- Split PAGE_SIZE > 4K fix out in different patch (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20251013034555.4121168-3-matthew.brost@intel.com
Correct several spelling and grammar issues in xe_gt struct
documentation to improve readability:
- Fix "to not" -> "do not".
- Fix "mmigrations" -> "migrations".
- Fix "Multiple queues exists" -> "Multiple queues exist".
- Fix "are be processed" -> "to be processed".
- Fix "have being processed" -> "have been processed".
These changes are purely cosmetic and do not affect functionality.
v2: drop kernel-doc formatting change. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251006151317.2553182-2-shuicheng.lin@intel.com
User requested power limits and clock settings are already restored as
part of smu_restore_dpm_user_profile(). It's unnecessary to call the
same restore as part of smu_resume().
Revert the following commits to drop that extra restore:
commit ed4efe426a ("drm/amd: Restore cached power limit during resume")
commit 796ff8a7e0 ("drm/amd: Restore cached manual clock settings during resume")
commit f9b80514a7 ("drm/amd: Only restore cached manual clock settings in restore if OD enabled")
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove queue after reset flag is required to remove a queue that has
been successfully reset to clean up the MES' internal state.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
userptrs could be changed by the user at any time and
hence while locking all the bos before GPU start processing
validate all the userptr bos.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At times we need a bo reference for hmm and for that add
a new struct amdgpu_hmm_range which will hold an optional
bo member and hmm_range.
Use amdgpu_hmm_range instead of hmm_range and let the bo
as an optional argument for the caller if they want to
the bo reference to be taken or they want to handle that
explicitly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For legacy SOCs, discovery binary is sideloaded. Instead of checking for
binary blob, use a flag to determine if discovery region needs to be
reserved.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow access to user interfaces like sysfs/hwmon only after full
initialization of the device. When device is part of XGMI hive and a
reset is required during initialization, the inteface files will be
created as part of minimal device initialization. Full initialization of
the device will be done only after all devices in XGMI hive are probed
and a reset is done together on all.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Complete reset-on-init sequence before sysfs interfaces are created.
Devices get properly initiaized only after reset, and then only sysfs
interfaces should be made available.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decouple the amdgpu fence from the amdgpu_job structure.
This lets us clean up the separate fence ops for the embedded
fence and other fences. This also allows us to allocate the
vm fence up front when we allocate the job.
v2: Additional cleanup suggested by Christian
v3: Additional cleanups suggested by Christian
v4: Additional cleanups suggested by David and
vm fence fix
v5: cast seqno (David)
Cc: David.Wu3@amd.com
Cc: christian.koenig@amd.com
Tested-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vangogh has separate limits for default PPT and fast PPT. Add
infrastructure to save both of these limits and restore both of them.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The min/max limits only make sense for default PPT. Restructure
smu_set_power_limit() to only use them in that case.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When passed around internally the upper 8 bits of power limit include
the limit type. This is non-obvious without digging into the nuances
of each function. Instead pass the limit type as an argument to all
applicable layers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN and VPE userqs are not yet supported and this code is
not correct. Userspace should provide the correct
doorbell offset with in their doorbell page for the IP.
Adjusting it here will not work as expected as userspace
and the queue itself will have different offsets.
We need to add a INFO IOCTL query to get the offset and
range for each IP within the doorbell page to handle this
properly.
Cc: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a userq failed to suspend the rest of the suspend sequence may
have problems. Pass the error code up to the caller for a decision
on what to do.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If multiple userq IDR are in use and there is an error handling one
at suspend or resume it will be silently discarded.
Switch the suspend/resume() code to use guards and return immediately.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_ip_suspend_phase2() calls amdgpu_ip_block_suspend()
which already sets HW block status to false when succeeding with
IP suspend. Remove the explicit call in
amdgpu_device_ip_suspend_phase2() so that the status is accurate.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error handling was introduced in commit e095026f00 ("drm/amdgpu:
validate suspend before function call") so the comment about TODO is no
longer needed.
Fixes: e095026f00 ("drm/amdgpu: validate suspend before function call")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The shutdown() callback uses amdgpu_ip_suspend() which doesn't notify
drm clients during shutdown. This could lead to hangs.
[How]
Change amdgpu_pci_shutdown() to call the same sequence as suspend/resume.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a user unmaps a userq VA, the driver must ensure
the queue has no in-flight jobs. If there is pending work,
the kernel should wait for the attached eviction (bookkeeping)
fence to signal before deleting the mapping.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeping waiting the userq fence infinitely until
hang detection, and then suspend the hang queue and
set the fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
