Only copy ucode for enabled xcc instead of copy for all 8 xcc
for rlc autoload on gfx v12_1 to save time.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the function execution sequence after removing
kgd2kfd_init_zone_device out of gpu full access region.
Fixes: c71980a3fc ("drm/amdgpu: reduce the full gpu access time in amdgpu_device_init.")
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
edp_pr_get_state() incorrectly casts a uint64_t * to uint32_t * when
calling dc_wake_and_execute_gpint(). The GPINT path writes only 32 bits,
leaving the upper 32 bits of the u64 output uninitialized. Replace the
cast with a u32 temporary and copy the result into the u64 pointer.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c
1448 bool edp_pr_get_state(const struct dc_link *link, uint64_t *state)
^^^^^^^^^^^^^^^
1449 {
...
1457 do {
1458 // Send gpint command and wait for ack
--> 1459 if (!dc_wake_and_execute_gpint(dc->ctx, DMUB_GPINT__GET_REPLAY_STATE, panel_inst,
1460 (uint32_t *)state, DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY)) {
^^^^^^^^^^^^^^^^^
The dc_wake_and_execute_gpint() function doesn't take a u64, it takes a
u32. It tries to initialize the state to zero at the start but that's
not going to work because of the type mismatch. It suggests that
callers are allowed to pass uninitialized data to edp_pr_get_state() but
at present there are no callers so this is only a bug in the code but
doesn't affect runtime.
1461 // Return invalid state when GPINT times out
1462 *state = PR_STATE_INVALID;
1463 }
Fixes: 74ce00932e ("drm/amd/display: Refactor panel replay set dmub cmd flow")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Robin Chen <robin.chen@amd.com>
Cc: Jack Chang <jack.chang@amd.com>
Cc: Leon Huang <Leon.Huang1@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of screen_info, store a copy of sysfb_primary_display as
device data. Pick it up in drivers. Later changes will add additional
data to the display info, such as EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 4846300ba8 ("rust: derive `Zeroable` for all structs & unions
generated by bindgen where possible") automatically derives
`MaybeZeroable` for all bindings. This is better than selectively
deriving `Zeroable` as it ensures all types that can implement
`Zeroable` do.
Regenerate the nova-core bindings so they benefit from this, and remove
a now unneeded implementation of `Zeroable`.
Fixes: 75f6b1de81 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251216-nova-fixes-v3-3-c7469a71f7c4@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The size of messages' payload is miscalculated, leading to extra data
passed to the message handler. While this is not a problem with our
current set of commands, others with a variable-length payload may
misbehave. Fix this by introducing a method returning the payload size
and using it.
Fixes: 75f6b1de81 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251216-nova-fixes-v3-2-c7469a71f7c4@nvidia.com
[acourbot@nvidia.com: update `PANIC:` comments as pointed out by Joel.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Commit 469c1c9eb6 ("kernel-doc: Issue warnings that were silently
discarded") started emitting warnings for cases that were previously
silently discarded. One such case is in intel_wakeref.h:
Warning: drivers/gpu/drm/i915/intel_wakeref.h:156 expecting prototype
for __intel_wakeref_put(). Prototype was for INTEL_WAKEREF_PUT_ASYNC()
instead
Arguably kernel-doc should be able to handle this, as it's valid C, but
having the flags defined between the function declarator and the body is
just asking for trouble. Move the INTEL_WAKEREF_PUT_* macros away from
there, making kernel-doc's life easier.
While at it, reduce the unnecessary abstraction levels by removing the
enum, and append _MASK to INTEL_WAKEREF_PUT_DELAY for clarity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251215120908.3515578-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Update the driver to use the non-deprecated mipi_dsi_*_multi()
helpers, as recommended in Documentation/gpu/todo.rst. The multi
variants provide proper error accumulation and handle the required
DCS NOP insertions, which suits the OTM8009A command sequences.
Refactor otm8009a_dcs_write_buf() and the dcs_write_seq/dcs_write_cmd_at
macros to take a mipi_dsi_multi_context pointer, passing it through
from callers. This ensures consistent error handling throughout the
driver.
Replace all mdelay() and msleep() calls within DSI command sequences
with mipi_dsi_msleep() for proper error accumulation.
The init, disable, and backlight update paths now return dsi_ctx.accum_err,
ensuring errors are propagated to callers.
Signed-off-by: Amin GATTOUT <amin.gattout@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251213142421.6762-1-amin.gattout@gmail.com
Add MIPI DSI support for the Renesas RZ/V2H(P) SoC. Compared to the
RZ/G2L family, the RZ/V2H(P) requires dedicated D-PHY PLL programming,
different clock configuration, and additional timing parameter handling.
The driver introduces lookup tables and helpers for D-PHY timings
(TCLK*, THS*, TLPX, and ULPS exit) as specified in the RZ/V2H(P) hardware
manual. ULPS exit timing depends on the LPCLK rate and is now handled
explicitly.
The implementation also adds support for 16 bpp RGB format, updates the
clock setup path to use the RZ/V2H PLL divider limits, and provides new
.dphy_init, .dphy_conf_clks, and .dphy_startup_late_init callbacks to
match the RZ/V2H sequence.
With these changes, the RZ/V2H(P) can operate the MIPI DSI interface in
compliance with its hardware specification while retaining support for
existing RZ/G2L platforms.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-8-prabhakar.mahadev-lad.rj@bp.renesas.com
If a dma-fence submission has in-fences and pagefault queues are running
work, there is little incentive to kick the pagefault queues off the
hardware until the dma-fence submission is ready to run. Therefore, wait
on the in-fences of the dma-fence submission before removing the
pagefault queues from the hardware.
v2:
- Fix kernel doc (CI)
- Don't wait under lock (Thomas)
- Make wait interruptable
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-6-matthew.brost@intel.com
If an exec queue is idle, there is no need to issue a schedule disable
to the GuC when suspending the queue’s execution. Opportunistically skip
this step if the queue is idle and not a parallel queue. Parallel queues
must have their scheduling state flipped in the GuC due to limitations
in how submission is implemented in run_job().
Also if all pagefault queues can skip the schedule disable during a
switch to dma-fence mode, do not schedule a resume for the pagefault
queues after the next submission.
v2:
- Don't touch the LRC tail is queue is suspended but enabled in run_job
(CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-5-matthew.brost@intel.com
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
During GT reset recovery in do_gt_restart(), xe_uc_start() was called
before xe_reg_sr_apply_mmio() restored engine-specific registers. This
created a race window where the scheduler could run jobs before hardware
state was fully restored.
This caused failures in eudebug tests (xe_exec_sip_eudebug@breakpoint-
waitsip-*) where TD_CTL register (containing TD_CTL_GLOBAL_DEBUG_ENABLE)
wasn't restored before jobs started executing. Breakpoints would fail to
trigger SIP entry because the debug enable bit wasn't set yet.
Fix by moving xe_uc_start() after all MMIO register restoration,
including engine registers and CCS mode configuration, ensuring all
hardware state is fully restored before any jobs can be scheduled.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Jan Maslak <jan.maslak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251210145618.169625-2-jan.maslak@intel.com
(cherry picked from commit 825aed0328)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
MEI GSC interrupt comes from i915 or xe driver. It has top half and
bottom half. Top half is called from i915/xe interrupt handler. It
should be in irq disabled context.
With RT kernel(PREEMPT_RT enabled), by default IRQ handler is in
threaded IRQ. MEI GSC top half might be in threaded IRQ context.
generic_handle_irq_safe API could be called from either IRQ or
process context, it disables local IRQ then calls MEI GSC interrupt
top half.
This change fixes B580 GPU boot issue with RT enabled.
Fixes: e02cea83d3 ("drm/xe/gsc: add Battlemage support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251107033152.834960-1-junxiao.chang@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 3efadf0287)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If wait for ring space started just before migration, it can delay
the recovery process, by waiting without bailout path for up to 2
seconds.
Two second wait for recovery is not acceptable, and if the ring was
completely filled even without the migration temporarily stopping
execution, then such a wait will result in up to a thousand new jobs
(assuming constant flow) being added while the wait is happening.
While this will not cause data corruption, it will lead to warning
messages getting logged due to reset being scheduled on a GT under
recovery. Also several seconds of unresponsiveness, as the backlog
of jobs gets progressively executed.
Add a bailout condition, to make sure the recovery starts without
much delay. The recovery is expected to finish in about 100 ms when
under moderate stress, so the condition verification period needs to be
below that - settling at 64 ms.
The theoretical max time which the recovery can take depends on how
many requests can be emitted to engine rings and be pending execution.
While stress testing, it was possible to reach 10k pending requests
on rings when a platform with two GTs was used. This resulted in max
recovery time of 5 seconds. But in real life situations, it is very
unlikely that the amount of pending requests will ever exceed 100,
and for that the recovery time will be around 50 ms - well within our
claimed limit of 100ms.
Fixes: a4dae94aad ("drm/xe/vf: Wakeup in GuC backend on VF post migration recovery")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251204200820.2206168-1-tomasz.lis@intel.com
(cherry picked from commit a00e305fba)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The Xe driver fails to build when CONFIG_DRM_XE_GPUSVM is disabled
but CONFIG_DRM_GPUSVM is turned on, due to the clash of two commits:
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:8:
drivers/gpu/drm/xe/xe_svm.h: In function 'xe_svm_init':
include/linux/stddef.h:8:14: error: passing argument 5 of 'drm_gpusvm_init' makes integer from pointer without a cast [-Wint-conversion]
drivers/gpu/drm/xe/xe_svm.h:217:38: note: in expansion of macro 'NULL'
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ^~~~
In file included from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from drivers/gpu/drm/xe/xe_vm_madvise.c:11:
include/drm/drm_gpusvm.h:254:35: note: expected 'long unsigned int' but argument is of type 'void *'
254 | unsigned long mm_start, unsigned long mm_range,
| ~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:14:
drivers/gpu/drm/xe/xe_svm.h:216:16: error: too many arguments to function 'drm_gpusvm_init'; expected 10, have 11
216 | return drm_gpusvm_init(&vm->svm.gpusvm, "Xe SVM (simple)", &vm->xe->drm,
| ^~~~~~~~~~~~~~~
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ~
include/drm/drm_gpusvm.h:251:5: note: declared here
Adapt the caller to the new argument list by removing the extraneous
NULL argument.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094704.1030933-1-arnd@kernel.org
(cherry picked from commit 29bce9c8b4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
