Messaging functions are now moved to message control block. Remove
unused legacy functions around messaging.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add asynchronous messaging (message which doesn't wait for response)
using message control block.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add message control block to abstract PMFW message protocol. Message
control block primarily carries message config which is set of register
addresses and message ops which abstracts the protocol of sending messages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, compressible surfaces were required to be non-coherent
(allocated as WC) because compression and coherency were mutually
exclusive. Starting with Xe3, hardware supports combining compression
with 1-way coherency, allowing compressible surfaces to be allocated as
WB memory. This provides applications with more efficient memory
allocation by avoiding WC allocation overhead that can cause system
stuttering and memory management challenges.
The implementation adds support for compressed+coherent PAT entry for
the xe3_lpg devices and updates the driver logic to handle the new
compression capabilities.
v2: (Matthew Auld)
- Improved error handling with XE_IOCTL_DBG()
- Enhanced documentation and comments
- Fixed xe_bo_needs_ccs_pages() outdated compression assumptions
v3:
- Improve WB compression support detection by checking PAT table
instead of version check
v4:
- Add XE_CACHE_WB_COMPRESSION, which simplifies the logic.
v5:
- Use U16_MAX for the invalid PAT index. (Matthew Auld)
Bspec: 71582, 59361, 59399
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260109093007.546784-1-x.wang@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add support for the dw-hdmi-qp driver to handle devices with missing
HPD pins.
Since in this situation we are now polling for the EDID data via i2c
change the error message to a rate limited debug message when we are
unable to complete an i2c read, as a disconnected device would
otherwise fill dmesg with i2c read errors.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-3-macroalpha82@gmail.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251031104846.119503-3-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251031104846.119503-2-marco.crivellari@suse.com
On Xe3_LPD, there is no instruction to program the CD2X divider anymore
and the hardware is expected to always use the default value of 0b00,
meaning "divide by 1".
With that, the CDCLK_CTL register was changed so that:
(1) The field "CD2X Divider Select" became a debug-only field.
Because we are programming CDCLK_CTL with a direct write instead
of read-modify-write operation, we still need to program "CD2X
Divider Select" in order to keep the field from deviating from its
default value. Let's, however, throw a warning if we encounter a
CDCLK value that would result in an unexpected value for that
field.
(2) The field "CD2X Pipe Select" has been removed. In fact, some
debugging in a PTL machine showed that such field comes back as
zero after writing a non-zero value to it. As such, do not
program it starting with Xe3_LPD.
v2:
- Add missing "val |= " when calling bxt_cdclk_cd2x_pipe().
(Dnyaneshwar)
Bspec: 68864, 69090
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260106-xe3_lpd-no-cd2x-divider-v2-1-06e5cbc9dabb@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
On the RK3506 platform, there is no iommu hardware. And even on
platform that have iommu hardware, it should be possible to use
VOP without enabling iommu. In this case, a contiguous memory
space like CMA should be used.
So this patch removes the dependency on ROCKCHIP_IOMMU
with an 'optional-dependency'.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
[added reference to optional-dependies description]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251106020632.92-9-kernel@airkyi.com
If a user has set an invalid CONFIG_DRM_PANIC_SCREEN value (such as
"qr_code" without CONFIG_DRM_PANIC_SCREEN_QR_CODE=y due to missing or
incorrect Rust dependencies), there is a panic when accessing
/sys/module/drm/parameters/panic_screen:
[ 12.218375] BUG: unable to handle page fault for address: 0000000796dd8818
[ 12.219737] #PF: supervisor read access in kernel mode
...
[ 12.227167] RIP: 0010:drm_panic_type_get+0x1b/0x30
If drm_panic_type_set() does not find a valid drm_panic_type enumeration
in drm_panic_type_map based on the provided value, it does not change
drm_panic_type from the default -1 value, which is not a valid index for
accessing drm_panic_type_map in drm_panic_type_get(), resulting in the
crash.
Validate the value of CONFIG_DRM_PANIC_SCREEN at boot time via the
return value of drm_panic_type_set() in drm_panic_init() and explicitly
fall back to the default of "user" with a message to the user so that
they can adjust their configuration or fix missing dependencies.
[ 0.800697] Unsupported value for CONFIG_DRM_PANIC_SCREEN ('qr_code'), falling back to 'user'...
Fixes: e85e9ccf3f ("drm/panic: Report invalid or unsupported panic modes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260105-drm_panic-handle-invalid-drm_panic_screen-v1-1-55228bd4b0f8@kernel.org
drm-misc-next for 6.20:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260108-literate-nyala-of-courtesy-de501a@houat
For 64KB pages, XE_PTE_PS64 is defined for all consecutive 4KB pages and
are all considered leaf nodes, so existing check was falsely adding
multiple 64KB pages to PRL.
For larger entries such as 2MB PDE, the check for pte->base.children is
insufficient since this array is always defined for page directory,
level 1 and above, so perform a check on the entry itself pointing to
the correct page.
For unmaps, if the range is properly covered by the page full directory,
page walker may finish without walking to the leaf nodes.
For example, a 1G range can be fully covered by 512 2MB pages if
alignment allows. In this case, the page walker will walk until
it reaches this corresponding directory which can correlate to the 1GB
range. Page walker will simply complete its walk and the individual 2MB
PDE leaves won't get accessed.
In this case, PRL invalidation is also required, so add a check to see if
pt entry cover the entire range since the walker will complete the walk.
There are possible race conditions that will cause driver to read a pte
that hasn't been written to yet. The 2 scenarios are:
- Another issued TLB invalidation such as from userptr or MMU notifier.
- Dependencies on original bind that has yet to be executed with an
unbind on that job.
The expectation is these race conditions are likely rare cases so simply
perform a fallback to full PPC flush invalidation instead.
v2:
- Reword commit and updated zero-pte handling. (Matthew B)
v3:
- Rework if statement for abort case with additional comments. (Matthew B)
Fixes: b912138df2 ("drm/xe: Create page reclaim list on unbind")
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260107010447.4125005-9-brian3.nguyen@intel.com
