A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some Qualcomm platforms, like SC8280XP, the attempt to set PC mode
during boot fails with PSCI_RET_DENIED and since commit 998fcd001f
("firmware/psci: Print a warning if PSCI doesn't accept PC mode") this
is now logged at warning level:
psci: failed to set PC mode: -3
As there is nothing users can do about the firmware behaving this way,
demote the warning to info level and clearly mark it as a firmware bug:
psci: [Firmware Bug]: failed to set PC mode: -3
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some interop issues seen across a few DP monitors with
HBR3 and herobrine boards where the DP display stays blank with hbr3.
This is still under investigation but in preparation for supporting
higher resolutions, its better to disable HBR3 till the issues are
root-caused as there is really no guarantee which monitors will show
the issue and which would not.
This can be enabled back after successful validation across more DP
sinks.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230329233416.27152-1-quic_abhinavk@quicinc.com
Since commit 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb6 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.
Fixes: bd5880e109 ("ARM: dts: colibri-imx6ull: Enable dual-role switching")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove unnecessary #address-cells/#size-cells to fix it.
Fixes: 9076cbaa77 ("ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property should be off-on-delay-us, not off-on-delay
Fixes: a39ed23bdf ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property should be off-on-delay-us, not off-on-delay
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The osc_32k supports #clock-cells as 0, using an id is wrong, drop it.
Fixes: a6a355ede5 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6b ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
Pull btrfs fixes from David Sterba:
- scan block devices in non-exclusive mode to avoid temporary mkfs
failures
- fix race between quota disable and quota assign ioctls
- fix deadlock when aborting transaction during relocation with scrub
- ignore fiemap path cache when there are multiple paths for a node
* tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ignore fiemap path cache when there are multiple paths for a node
btrfs: fix deadlock when aborting transaction during relocation with scrub
btrfs: scan device in non-exclusive mode
btrfs: fix race between quota disable and quota assign ioctls
This reverts commit a837e5161c, which broke probing of the venus
driver, at least on the SC7180 SoC HP X2 Chromebook:
qcom-venus aa00000.video-codec: Adding to iommu group 11
qcom-venus aa00000.video-codec: non legacy binding
qcom-venus aa00000.video-codec: failed to reset venus core
qcom-venus: probe of aa00000.video-codec failed with error -110
Matthias Kaehlcke also reported that the same change caused a regression
in SC7180 and sc7280, that prevents AOSS from entering sleep mode during
system suspend. So let's revert this commit for now to fix both issues.
Fixes: a837e5161c ("venus: firmware: Correct non-pix start and end addresses")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull driver core fixes from Greg KH:
"Here are three small changes for 6.3-rc5 semi-related to driver core
stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems"
* tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
cacheinfo: Fix LLC is not exported through sysfs
Documentation/security-bugs: move from admin-guide/ to process/
mtd: spi-nor: fix memory leak when using debugfs_lookup()
Pull powerpc fixes from Michael Ellerman:
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)
- Fix oops when a PF_IO_WORKER thread tries to core dump
- Don't try to reconfigure VAS when it's disabled
Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.
* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc/64s: Fix __pte_needs_flush() false positive warning
Pull cifs client fixes from Steve French:
"Four cifs/smb3 client (reconnect and DFS related) fixes, including two
for stable:
- DFS oops fix
- DFS reconnect recursion fix
- An SMB1 parallel reconnect fix
- Trivial dead code removal in smb2_reconnect"
* tag '6.3-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: get rid of dead check in smb2_reconnect()
cifs: prevent infinite recursion in CIFSGetDFSRefer()
cifs: avoid races in parallel reconnects in smb1
cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
Pull input fixes from Dmitry Torokhov:
- fixes to ALPS and Focaltech PS/2 drivers dealing with the breakage of
switching to -funsigned-char
- quirks to i8042 to better handle Lifebook A574/H and TUXEDO devices
- a quirk to Goodix touchscreen driver to handle Yoga Book X90F
- a fix for incorrectly merged patch to xpad game controller driver
* tag 'input-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix
Input: alps - fix compatibility with -funsigned-char
Input: focaltech - use explicitly signed char type
Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTON
Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table
Input: i8042 - add quirk for Fujitsu Lifebook A574/H
Pull pin control fixes from Linus Walleij:
"Some pin control fixes for the v6.3 series.
The most notable and urgent one is probably the AMD fix which affects
AMD laptops, found by the Chromium people.
Summary:
- Fix up the Kconfig options for MediaTek MT7981
- Fix the irq domain name in the AT91-PIO4 driver
- Fix some alternative muxing modes in the Ocelot driver
- Allocate the GPIO numbers dynamically in the STM32 driver
- Disable and mask interrupts on resume in the AMD driver
- Fix a typo in the Qualcomm SM8550 pin control device tree bindings"
* tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold
pinctrl: amd: Disable and mask interrupts on resume
pinctrl: stm32: use dynamic allocation of GPIO base
pinctrl: ocelot: Fix alt mode for ocelot
pinctrl: at91-pio4: fix domain name assignment
pinctrl: mediatek: fix naming inconsistency
pinctrl: mediatek: add missing options to PINCTRL_MT7981
Pull Kbuild fixes from Masahiro Yamada:
- Fix linux-headers debian package
- Fix a merge_config.sh error due to a misspelled variable
- Fix modversion for 32-bit build machines
* tag 'kbuild-fixes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix processing of CRCs on 32-bit build machines
scripts: merge_config: Fix typo in variable name.
kbuild: deb-pkg: set version for linux-headers paths
Pull iommu fixes from Joerg Roedel:
- Maintainer update for S390 IOMMU driver
- A fix for the set_platform_dma_ops() call-back in the Exynos
IOMMU driver
- Intel VT-d fixes from Lu Baolu:
- Fix a lockdep splat
- Fix a supplement of the specification
- Fix a warning in perfmon code
* tag 'iommu-fixes-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix an IOMMU perfmon warning when CPU hotplug
iommu/vt-d: Allow zero SAGAW if second-stage not supported
iommu/vt-d: Remove unnecessary locking in intel_irq_remapping_alloc()
iommu/exynos: Fix set_platform_dma_ops() callback
MAINTAINERS: Update s390-iommu driver maintainer information
The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper that
requires a __maybe_unused annotation to avoid a warning:
drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
static int imx290_runtime_resume(struct device *dev)
^
drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
static int imx290_runtime_suspend(struct device *dev)
^
Convert this to the new RUNTIME_PM_OPS() helper that so this is not
required. To improve this further, also use the pm_ptr() helper that
lets the dev_pm_ops get dropped entirely when CONFIG_PM is disabled.
A related mistake happened in the of_match_ptr() macro here, which like
SET_RUNTIME_PM_OPS() requires the match table to be marked as
__maybe_unused, though I could not reproduce building this without
CONFIG_OF. Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.
Fixes: 02852c01f6 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull NFS client fixes from Anna Schumaker:
- Fix shutdown of NFS TCP client sockets
- Fix hangs when recovering open state after a server reboot
* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix shutdown of NFS TCP client socket
NFSv4: Fix hangs when recovering open state after a server reboot
Pull x86 platform driver fixes from Hans de Goede:
- Fix a regression in ideapad-laptop which caused the touchpad to stop
working after a suspend/resume on some models
- One other small fix and three hw-id additions
* tag 'platform-drivers-x86-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLE
platform/x86: asus-nb-wmi: Add quirk_asus_tablet_mode to other ROG Flow X13 models
platform/x86: gigabyte-wmi: add support for X570S AORUS ELITE
platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AX
platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix
Pull PCI fix from Bjorn Helgaas:
- Fix DesignWare PORT_LINK_CONTROL setup, which was corrupted when the
DT "snps,enable-cdm-check" property was present (Yoshihiro Shimoda)
* tag 'pci-v6.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled
Pull regulator fix from Mark Brown:
"Deferred probe fix for v6.3.
This fixes a rarely triggered issue where we would treat probe
deferral for clocks as a fatal error in the fixed regulator, causing
it to fail to retry when it should"
* tag 'regulator-fix-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Handle deferred clk
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Mark Lexar NM760 as IGNORE_DEV_SUBNQN (Juraj Pecigos)
- Fix a possible UAF when failing to allocate an TCP io queue (Sagi
Grimberg)
- MD pull request via Song:
- Fix a null pointer deference in 6.3-rc (Yu Kuai)
- uevent partition fix (Alyssa)
* tag 'block-6.3-2023-03-30' of git://git.kernel.dk/linux:
nvme-tcp: fix a possible UAF when failing to allocate an io queue
md: fix regression for null-ptr-deference in __md_stop()
nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
loop: LOOP_CONFIGURE: send uevents for partitions
Pull io_uring fixes from Jens Axboe:
- Fix a regression with the poll retry, introduced in this merge window
(me)
- Fix a regression with the alloc cache not decrementing the member
count on removal. Also a regression from this merge window (Pavel)
- Fix race around rsrc node grabbing (Pavel)
* tag 'io_uring-6.3-2023-03-30' of git://git.kernel.dk/linux:
io_uring: fix poll/netmsg alloc caches
io_uring/rsrc: fix rogue rsrc node grabbing
io_uring/poll: clear single/double poll flags on poll arming
Commit 5829f8a897 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.
This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).
But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.
It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.
So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.
Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.
Fixes: 5829f8a897 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@redhat.com
Pull thermal control fixes from Rafael Wysocki:
"These remove two recently added excessive lockdep assertions from the
sysfs-related thermal code and fix two issues in Intel thermal
drivers.
Specifics:
- Drop two lockdep assertions producing false positive warnings from
the sysfs-related thermal core code (Rafael Wysocki)
- Fix handling of two recently added module parameters in the Intel
powerclamp thermal driver (David Arcari)
- Fix one more deadlock in the int340x thermal driver (Srinivas
Pandruvada)"
* tag 'thermal-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
thermal: intel: int340x: processor_thermal: Fix additional deadlock
thermal: core: Drop excessive lockdep_assert_held() calls
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression related to the handling of ACPI notifications
that made it more likely for ACPI driver callbacks to be invoked in an
unexpected order and NULL pointers can be dereferenced as a result or
similar.
The fix is to modify the global ACPI notification handler so it does
not invoke driver callbacks at all and allow the device-level
notification handlers to receive "system" notifications (for the
drivers that want to receive them)"
* tag 'acpi-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Rework system-level device notification handling
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for FPU probing in XIP kernels
- Always enable the alternative framework for non-XIP kernels
* tag 'riscv-for-linus-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Pull MIPS fix from Thomas Bogendoerfer:
"Fix to avoid crash on BCM6358 platforms"
* tag 'mips-fixes_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: bmips: BCM6358: disable RAC flush for TP1
A warning can be triggered when hotplug CPU 0.
$ echo 0 > /sys/devices/system/cpu/cpu0/online
------------[ cut here ]------------
Voluntary context switch within RCU read-side critical section!
WARNING: CPU: 0 PID: 19 at kernel/rcu/tree_plugin.h:318
rcu_note_context_switch+0x4f4/0x580
RIP: 0010:rcu_note_context_switch+0x4f4/0x580
Call Trace:
<TASK>
? perf_event_update_userpage+0x104/0x150
__schedule+0x8d/0x960
? perf_event_set_state.part.82+0x11/0x50
schedule+0x44/0xb0
schedule_timeout+0x226/0x310
? __perf_event_disable+0x64/0x1a0
? _raw_spin_unlock+0x14/0x30
wait_for_completion+0x94/0x130
__wait_rcu_gp+0x108/0x130
synchronize_rcu+0x67/0x70
? invoke_rcu_core+0xb0/0xb0
? __bpf_trace_rcu_stall_warning+0x10/0x10
perf_pmu_migrate_context+0x121/0x370
iommu_pmu_cpu_offline+0x6a/0xa0
? iommu_pmu_del+0x1e0/0x1e0
cpuhp_invoke_callback+0x129/0x510
cpuhp_thread_fun+0x94/0x150
smpboot_thread_fn+0x183/0x220
? sort_range+0x20/0x20
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The synchronize_rcu() will be invoked in the perf_pmu_migrate_context(),
when migrating a PMU to a new CPU. However, the current for_each_iommu()
is within RCU read-side critical section.
Two methods were considered to fix the issue.
- Use the dmar_global_lock to replace the RCU read lock when going
through the drhd list. But it triggers a lockdep warning.
- Use the cpuhp_setup_state_multi() to set up a dedicated state for each
IOMMU PMU. The lock can be avoided.
The latter method is implemented in this patch. Since each IOMMU PMU has
a dedicated state, add cpuhp_node and cpu in struct iommu_pmu to track
the state. The state can be dynamically allocated now. Remove the
CPUHP_AP_PERF_X86_IOMMU_PERF_ONLINE.
Fixes: 46284c6ceb ("iommu/vt-d: Support cpumask for IOMMU perfmon")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230328182028.1366416-1-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230329134721.469447-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
Using dmar_global_lock in intel_irq_remapping_alloc() is unnecessary as
the DMAR global data structures are not touched there. Remove it to avoid
below lockdep warning.
======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc2 #468 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ff1db4cb40178698 (&domain->mutex){+.+.}-{3:3},
at: __irq_domain_alloc_irqs+0x3b/0xa0
but task is already holding lock:
ffffffffa0c1cdf0 (dmar_global_lock){++++}-{3:3},
at: intel_iommu_init+0x58e/0x880
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (dmar_global_lock){++++}-{3:3}:
lock_acquire+0xd6/0x320
down_read+0x42/0x180
intel_irq_remapping_alloc+0xad/0x750
mp_irqdomain_alloc+0xb8/0x2b0
irq_domain_alloc_irqs_locked+0x12f/0x2d0
__irq_domain_alloc_irqs+0x56/0xa0
alloc_isa_irq_from_domain.isra.7+0xa0/0xe0
mp_map_pin_to_irq+0x1dc/0x330
setup_IO_APIC+0x128/0x210
apic_intr_mode_init+0x67/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x41e/0x7e0
secondary_startup_64_no_verify+0xe0/0xeb
-> #0 (&domain->mutex){+.+.}-{3:3}:
check_prevs_add+0x160/0xef0
__lock_acquire+0x147d/0x1950
lock_acquire+0xd6/0x320
__mutex_lock+0x9c/0xfc0
__irq_domain_alloc_irqs+0x3b/0xa0
dmar_alloc_hwirq+0x9e/0x120
iommu_pmu_register+0x11d/0x200
intel_iommu_init+0x5de/0x880
pci_iommu_init+0x12/0x40
do_one_initcall+0x65/0x350
kernel_init_freeable+0x3ca/0x610
kernel_init+0x1a/0x140
ret_from_fork+0x29/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(dmar_global_lock);
lock(&domain->mutex);
lock(dmar_global_lock);
lock(&domain->mutex);
*** DEADLOCK ***
Fixes: 9dbb8e3452 ("irqdomain: Switch to per-domain locking")
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Tested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230314051836.23817-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20230329134721.469447-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is neither a driver that parses this nor a DT binding schema that
documents it, so let's remove from the DTS files that make use of this.
The properties that exist are post-pwm-on-delay-ms and pwm-off-delay-ms,
defined in the pwm-backlight DT binding. If the delays are really needed
then those properties should be used instead.
Brian Norris mentioned though that looking at the first downstream usage
of the pwm-delay-us property for RK3399 Gru systems in ChromiumOS tree,
he couldn't find a spec reference that said that this was really needed.
So perhaps it was unnecessary added and a simple removal would be enough.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20230330231924.2404747-1-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull dma-mapping fixes from Christoph Hellwig:
- fix for swiotlb deadlock due to wrong alignment checks (GuoRui.Yu,
Petr Tesarik)
* tag 'dma-mapping-6.3-2023-03-31' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix slot alignment checks
swiotlb: use wrap_area_index() instead of open-coding it
swiotlb: fix the deadlock in swiotlb_do_find_slots
