The bdev parameter to ->ioctl contains the block device that the ioctl
is called on, which can be the partition. But the openers check in
nbd_bdev_reset really needs to check use the whole device, so switch to
using that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc -Wextra warns about mixing drbd_state_rv with drbd_ret_code
in a couple of places:
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_set_role':
drivers/block/drbd/drbd_nl.c:777:14: warning: comparison between 'enum drbd_state_rv' and 'enum drbd_ret_code' [-Wenum-compare]
777 | if (retcode != NO_ERROR)
| ^~
drivers/block/drbd/drbd_nl.c:784:12: warning: implicit conversion from 'enum drbd_ret_code' to 'enum drbd_state_rv' [-Wenum-conversion]
784 | retcode = ERR_MANDATORY_TAG;
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_attach':
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
1965 | retcode = rv; /* FIXME: Type mismatch. */
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_connect':
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2690 | retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_disconnect':
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2803 | retcode = rv; /* FIXME: Type mismatch. */
| ^
In each case, both are passed into drbd_adm_finish(), which just takes
a 32-bit integer and is happy with either, presumably intentionally.
Restructure the code to pass either type directly in there in most
cases, avoiding the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes: 036b17eaab ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For block devices, the SCSI target drivers implements UNMAP as calls to
blkdev_issue_discard, which does not guarantee zeroing just because
Write Zeroes is supported.
Note that this does not affect the file backed path which uses
fallocate to punch holes.
Fixes: 2237498f0b ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-9-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio
would not be associated with any blkcg, the usage of __bio_blkcg() in
BFQ is prone to races with the task being migrated between cgroups as
__bio_blkcg() calls at different places could return different blkcgs.
Convert BFQ to the new situation where bio->bi_blkg is initialized in
bio_set_dev() and thus practically always valid. This allows us to save
blkcg_gq lookup and noticeably simplify the code.
CC: stable@vger.kernel.org
Fixes: 0fe061b9f0 ("blkcg: fix ref count issue with bio_blkcg() using task_css")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track whether bfq_group is still online. We cannot rely on
blkcg_gq->online because that gets cleared only after all policies are
offlined and we need something that gets updated already under
bfqd->lock when we are cleaning up our bfq_group to be able to guarantee
that when we see online bfq_group, it will stay online while we are
holding bfqd->lock lock.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We call bfq_init_rq() from request merging functions where requests we
get should have already gone through bfq_init_rq() during insert and
anyway we want to do anything only if the request is already tracked by
BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply
skip requests untracked by BFQ. We move bfq_init_rq() call in
bfq_insert_request() a bit earlier to cover request merging and thus
can transfer FIFO position in case of a merge.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-6-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio().
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bfqq is shared by multiple processes it can happen that one of the
processes gets moved to a different cgroup (or just starts submitting IO
for different cgroup). In case that happens we need to split the merged
bfqq as otherwise we will have IO for multiple cgroups in one bfqq and
we will just account IO time to wrong entities etc.
Similarly if the bfqq is scheduled to merge with another bfqq but the
merge didn't happen yet, cancel the merge as it need not be valid
anymore.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can happen that the parent of a bfqq changes between the moment we
decide two queues are worth to merge (and set bic->stable_merge_bfqq)
and the moment bfq_setup_merge() is called. This can happen e.g. because
the process submitted IO for a different cgroup and thus bfqq got
reparented. It can even happen that the bfqq we are merging with has
parent cgroup that is already offline and going to be destroyed in which
case the merge can lead to use-after-free issues such as:
BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50
Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544
CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x46/0x5a
print_address_description.constprop.0+0x1f/0x140
? __bfq_deactivate_entity+0x9cb/0xa50
kasan_report.cold+0x7f/0x11b
? __bfq_deactivate_entity+0x9cb/0xa50
__bfq_deactivate_entity+0x9cb/0xa50
? update_curr+0x32f/0x5d0
bfq_deactivate_entity+0xa0/0x1d0
bfq_del_bfqq_busy+0x28a/0x420
? resched_curr+0x116/0x1d0
? bfq_requeue_bfqq+0x70/0x70
? check_preempt_wakeup+0x52b/0xbc0
__bfq_bfqq_expire+0x1a2/0x270
bfq_bfqq_expire+0xd16/0x2160
? try_to_wake_up+0x4ee/0x1260
? bfq_end_wr_async_queues+0xe0/0xe0
? _raw_write_unlock_bh+0x60/0x60
? _raw_spin_lock_irq+0x81/0xe0
bfq_idle_slice_timer+0x109/0x280
? bfq_dispatch_request+0x4870/0x4870
__hrtimer_run_queues+0x37d/0x700
? enqueue_hrtimer+0x1b0/0x1b0
? kvm_clock_get_cycles+0xd/0x10
? ktime_get_update_offsets_now+0x6f/0x280
hrtimer_interrupt+0x2c8/0x740
Fix the problem by checking that the parent of the two bfqqs we are
merging in bfq_setup_merge() is the same.
Link: https://lore.kernel.org/linux-block/20211125172809.GC19572@quack2.suse.cz/
CC: stable@vger.kernel.org
Fixes: 430a67f9d6 ("block, bfq: merge bursts of newly-created queues")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
