mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-03 20:34:23 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,249,352 Commits 1 Branch 929 Tags
d5bd4041cd70faf26fc9a54bd6f172537bbe77f3
Commit Graph

1249352 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Johannes Berg
d5bd4041cd wifi: iwlwifi: mvm: don't set replay counters to 0xff 
The firmware (later) actually uses the values even for keys
that are invalid as far as the host is concerned, later in
rekeying, and then only sets the low 48 bits since the PNs
are only 48 bits over the air. It does, however, compare the
full 64 bits later, obviously causing problems.

Remove the memset and use kzalloc instead to avoid any old
heap data leaking to the firmware. We already init all the
other fields in the struct anyway. This leaves the data set
to zero for any unused fields, so the firmware can look at
them safely even if they're not used right now.

Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.462101146fef.I10f3855b99417af4247cff04af78dcbc6cb75c9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Mukesh Sisodiya
5f4e099499 wifi: iwlwifi: pcie: Add new PCI device id and CNVI 
Add the support for a new PCIE device-id 0x272E and a new CNVI
type.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.506db9b4a664.Ia2e3a77b880c449ac0e8d20b8cea25e6f07f1b81@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Emmanuel Grumbach
ff04f78ce3 wifi: iwlwifi: mvm: don't send the smart fifo command if not needed 
Newer firmware versions no longer needs this command. Don't send it if
the firmware advertises it does not need it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.527595995aa0.I0381bef1dc815945f2ec194fecc657e5c75bb2ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Emmanuel Grumbach
e35f316bce wifi: iwlwifi: mvm: don't set the MFP flag for the GTK 
The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.

Fixes: 5c75a208c2 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2f2c602ab3c6.If13b2e2fa532381d985c07df130bee1478046c89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Johannes Berg
38a3241f2f wifi: iwlwifi: fw: allow vmalloc for PNVM image 
This image can be pretty big (I've seen order-7 allocations!),
and we later have to copy it to DMA memory (in newer FW even
there it won't need to be contiguous), so we can easily deal
with it being in vmalloc. Use kvmemdup()/kvfree() for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.9b4c06b5d533.Idf699b36ec95ee36f530355cd2cb1da297a098f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Johannes Berg
c82a950f63 wifi: iwlwifi: mvm: don't do duplicate detection for nullfunc packets 
For non-QoS nullfunc packets we currently do the duplicate detection,
which seems a bit wrong. Fix the code to check for _any_ instead of
just _qos_ nullfunc.

Also remove setting the RX_FLAG_DUP_VALIDATED flag, we haven't done
anything here; in particular, we haven't checked for multicast in an
MLO scenario.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4fea3bd2d4a6.Ib80764f4581d875cff08469016894f7c817c3828@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Johannes Berg
2e0e766bd8 wifi: iwlwifi: mvm: fix erroneous queue index mask 
When retrieving the queue index ("SCD SSN") from the TX response,
it's currently masked with 0xFFF. However, now that we have queues
longer than 4k, that became wrong, so make the mask depend on the
hardware family.

This fixes an issue where if we get a single frame reclaim while
in the top half of an 8k long queue, we'd reclaim-wrap the queue
twice (once on this and then again on the next non-single reclaim)
which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(),
but could have other negative side effects (such as unmapping a
frame that wasn't transmitted yet, and then taking an IOMMU fault)
as well.

Fixes: 7b3e42ea2e ("iwlwifi: support multiple tfd queue max sizes for different devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4148a6ef54e0.I733a70f679c25f9f99097a8dcb3a1f8165da6997@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Shaul Triebitz
0c1c91604f wifi: iwlwifi: mvm: avoid garbage iPN 
After waking from D3, we set the iPN given by the firmware.
For some reason, CIPHER_SUITE_AES_CMAC was missed.
That caused copying garbage to the iPN - causing false replays.

(since 'seq' is on the stack, and the iPN from the firmware
was not copied into it, it contains garbage which later is
copied to the iPN key).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.2be5b35be30f.I99db8700d01092d22a6d76f1fc1bd5916c9df784@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Shaul Triebitz
c4302c0f2d wifi: iwlwifi: mvm: always update keys in D3 exit 
If during D3 there was both a GTK rekey and a
disconnection, when waking up, we must first
update the new keys and then disconnect.

The reason is that when disconnecting we first need
to remove the keys.
Trying to remove invalid keys results in firmware
assert.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.68cf3974b5d7.Iac9b71a1906ab973aba9baadc9e923b63c0b4945@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Johannes Berg
1b3741ea40 wifi: iwlwifi: mvm: limit pseudo-D3 to 60 seconds 
With unlimited pseudo-D3, we can get stuck here in the read if
the firmware never wakes up. All of our testing infrastructure
however will anyway give up after at most a minute, so there's
no value in that.

Limit this to about a minute to avoid getting stuck with the
RTNL held forever, which basically makes the machine unusable
and then we can't even understand what caused the failure.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.ca55b3a7fa8d.Id746846f187442ebc689416d2688f2bd9278c0e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:48 +01:00
Johannes Berg
066425b6c8 wifi: iwlwifi: mvm: combine condition/warning 
WARN() returns the value of the condition, so it's
nicer to combine the warning and the if.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.44f63334760e.If0a2cf347a8676a3830c5c3183a257fe11f31419@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Shaul Triebitz
f05ef3497f wifi: iwlwifi: mvm: fix the key PN index 
When waking from D3 (and a GTK rekey happened during
D3), the key itself is saved in iwl_wowlan_status_data::gtk
array, but the PN is saved in iwl_wowlan_status_data::gtk_seq
array.
The indices (of the same key) might differ in both arrays.
Fix using the gtk array index in the gtk_seq array.
Rather, iterate and search for the correct key in the
gtk_seq array.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.bdd0511c007d.I3325288c64c010a4d008ac4429de1c2b14ef764c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Daniel Amosi
b7acc059a7 wifi: iwlwifi: mvm: Keep connection in case of missed beacons during RX 
The client needs to disconnect from AP in case of more than 19 missed
beacons only if no data is coming from that AP, otherwise it needs to
stay connected.

Signed-off-by: Daniel Amosi <amosi.daniel@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.080195242c18.Ib166fc4e46666165a88e673a4a196cb8f18fdec4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Miri Korenblit
556c7cd721 wifi: iwlwifi: properly check if link is active 
Before sending SESSION PROTECTION cmd the driver verifies that the
link for which the cmd is going to be sent is active.
The existing code is checking it only for MLD vifs,
but also the deflink (in non-MLD vifs) needs to be active in order
the have a session protection for it.
Fix this by checking if the link is active also for non-MLD vifs

Fixes: 1350658373 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240205211151.c61820f14ca6.Ibbe0f848f3e71f64313d21642650b6e4bfbe4b39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Miri Korenblit
74f4cd7107 wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef 
The BIOS tables SGOM and UATS are read from UEFI, but require
additional tables (WGDS and DSM func 3, respectively) which used to be
read from ACPI only, so the code handling those tables had to be under
ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from
both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI
anymore.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.dcaa3325773f.I649079c842369dcae3a362842322deca422a61d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Johannes Berg
0dd2b42c2c wifi: iwlwifi: mvm: don't abort queue sync in CT-kill 
CT kill should stop doing a lot of TX etc. to cool down the
NIC, but we don't stop all commands from going to the NIC,
and as such we shouldn't abort queue sync, since it can get
confused if we do, warning that we do it twice at the same
time etc. Only stop it when we'd also not send it in the
first place.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Shaul Triebitz
87f690f5a9 wifi: iwlwifi: mvm: define RX queue sync timeout as a macro 
define the timeout on RX queues notification as a macro so it will be
clearer.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Johannes Berg
f4eedfd88b wifi: iwlwifi: mvm: expand queue sync warning messages 
It's a bit tricky to understand what's going on here, add
more data to the warning messages to make that clearer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Ilan Peer
4d951e265c wifi: iwlwifi: mvm: Declare support for secure LTF measurement 
Declare support for secure LTF measurement if the FW supports it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.f20d2437c06f.I479df8ab543db2d05c413119ad3eb3936cc86294@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:47 +01:00
Avraham Stern
8b720901d9 wifi: iwlwifi: mvm: advertise support for protected ranging negotiation 
Advertise support for protected ranging negotiation if the firmware
supports it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206135637.9bb7e13ad18c.I578af1c9836e91069ce318b265bd221f42955992@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Johannes Berg
f863afbd30 wifi: iwlwifi: mvm: remove one queue sync on BA session stop 
As documented in the comment, this queue sync was here to
ensure that an async IWL_MVM_RXQ_NSSN_SYNC queue sync won't
race with setting up a new BA session with the same BAID.
However, we no longer do IWL_MVM_RXQ_NSSN_SYNC queue sync,
so we can remove this as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Grumbach, Emmanuel <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.0a09ab337b54.I0dfe239dc30577a2ff23f910b10e9957364ccc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Miri Korenblit
f51d643182 wifi: iwlwifi: support EHT for WH 
sku_cap_11be_enable should be set to true also for WH.

Fixes: e1374ed253 ("wifi: iwlwifi: Add support for new CNVi (SC)")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240204235836.a6d4097cbaca.I8b00fa7b6226b4116cd91f70fb0b15e79b4dee5a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Emmanuel Grumbach
449619744d wifi: iwlwifi: mvm: don't support reduced tx power on ack for new devices 
This is no longer supported by the firmware.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.768d56206093.I737872ff19f0dbeefca42a239d673f05b9ac06f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Johannes Berg
318b3fac34 wifi: iwlwifi: use system_unbound_wq for debug dump 
This can take some time, so it's better to use the unbound
workqueue.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.75c8d2286f81.I478e9faf422f22ae66c0a113003fea83565c5692@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Johannes Berg
83f57c936b wifi: iwlwifi: mvm: remove EHT code from mac80211.c 
The code here is the pre-MLD API, but of course older FW
that doesn't support MLD APIs cannot support EHT. Remove
some code that shouldn't be there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.bde5a9d87759.I4c69dd94416f92b0f1f53dd57dafecbec643600d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Miri Korenblit
814cdd7c37 wifi: iwlwifi: read mac step from aux register 
in BZ, the mac step is not updated to the HW REV CSR.
For BZ-I, read it from the CNVI aux register
For BZ-U always take B step.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.dcc18b533f13.I0a6267fa0a142744bcf7500b45f667b596b492c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Miri Korenblit
f94c24386d wifi: iwlwifi: adjust rx_phyinfo debugfs to MLO 
This debugfs entry is used to configure the rx_phyinfo.
Currently we are sending the phy cmd only for the deflink.
Change it to send the cmd for all active links of the vif

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240204235836.a68ee2b6cb58.Iddc47c608ec990b12be0ae5b1ee89bcf6beb0f6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Johannes Berg
e047e0e3cc wifi: iwlwifi: mvm: const-ify chandef pointers 
In much of the PHY context handling code the chandef
coming from mac80211 is read-only, mark them const
to make that clearer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.e7fbd3e26d85.I72d72e61dc5f5fc76c53e32cb60b66237eaedec3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:46 +01:00
Anjaneyulu
3d801a7591 wifi: iwlwifi: Add support for PPAG cmd v5 and PPAG revision 3 
Add support for
- PPAG revision 3 in BIOS to enable PPAG in UHB
- PPAG command version 5, this command allows OEM to control
  enablement of PPAG for LPI for UHB mode in USA and ETSI countries.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.d17425824b11.If2c1b29e3c579f4135383681af2d625cfe2cffcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Johannes Berg
a20ac99b5f wifi: iwlwifi: pcie: don't allow hw-rfkill to stop device on gen2 
On new devices the HW rfkill shutdown doesn't need to be handled
"as fast as possible", so disallow the immediate shutdown mode
here via documentation and a warning.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.794c5387e67e.I064365428815ec3135afa345fbbde78449b60203@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Miri Korenblit
80b0c88033 wifi: iwlwifi: add HONOR to PPAG approved list 
Add HONOR to the list of the OEMs that are allowed to use
the PPAG feature

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240204235836.3498abc62910.I156c34206c58ff26e73f705cbda6f1a49b88edda@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Aditya Kumar Singh
04ada8599c wifi: mac80211: add support to call csa_finish on a link 
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a
finalizing worker using the deflink. With MLO, there is a need to do it
on a given link basis.

Pass link ID of the link on which CSA needs to be finalized.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Aditya Kumar Singh
1a96bb4e8a wifi: mac80211: start and finalize channel switch on link basis 
Add changes to start a channel switch as well as finalize it on link basis
in order to support CSA with MLO as well.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Aditya Kumar Singh
a3a637a6c0 wifi: mac80211: handle set csa/after_csa beacon on per link basis 
In order to support CSA with MLO, there is a need to handle the functions
ieee80211_set_csa_beacon() and ieee80211_set_after_csa_beacon() on a per
link basis.

Implement this by making the function argument accept the the link data
instead of the sdata.

Currently, deflink would only be passed. Proper link data will be passed in
a subsequent patch.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-4-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Aditya Kumar Singh
480e7048aa wifi: mac80211: update beacon counters per link basis 
Currently, function to update beacon counter uses deflink to fetch
the beacon and then update the counter. However, with MLO, there is
a need to update the counter for the beacon in a particular link.

Add support to use link_id in order to fetch the beacon from a particular
link data during beacon update counter.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Aditya Kumar Singh
4ace04c0bd wifi: cfg80211: send link id in channel_switch ops 
Currently, during channel switch, no link id information is passed down.
In order to support channel switch during Multi Link Operation, it is
required to pass link id as well.

Add changes to pass link id in the channel_switch cfg80211_ops.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Michael-CY Lee
21c3f8f955 wifi: mac80211: refactor STA CSA parsing flows 
The new Wi-Fi Standard (IEEE Std 802.11-2020 9.4.2.160) specifies that
the Wide Bandwidth Channel Switch (WBCS) Element subfields have the same
definitions as VHT operation information if the operating band is not
S1G.

The problem comes when the BSS is in 6 GHz band, the STA parses the WBCS
Element by ieee80211_chandef_vht_oper(), which checks the capabilities for
HT/VHT mode, not HE/EHT mode.

This patch refactors STA CSA parsing flow so that the corresponding
capabilities can be checked. Also, it adds the way to use op_class in ECSA
Element to build a new chandef.

In summary, the new steps for STA to handle CSA event are:
1. build the new chandef from one of the CSA-related (Sub)Elements in
   following order,
   - Bandwidth Indication (Sub)Element
   - Wide Bandwidth Channel Switch (Sub)Element
   - Operating class in Extended Channel Switch Announcement Element
   - Channel Switch Announcement Element
2. convert the new chandef into operation information according to the
   operating band in order to check if the new chandef fits STA's
   capabilities.
3. downgrade the bandwidth until current bandwidth is not disabled.

Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20231222010914.6521-3-michael-cy.lee@mediatek.com
[rebase on top of the changes with struct ieee80211_conn_settings,
 prefer leXY_encode_bits()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:45 +01:00
Michael-CY Lee
68de13028b wifi: cfg80211: Add utility for converting op_class into chandef 
This utility is used in STA CSA handling. The op_class in the ECSA
Element can be converted into chandef.

Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20231222010914.6521-2-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Dan Carpenter
f29a8be886 wifi: iwlwifi: return negative -EINVAL instead of positive EINVAL 
The '-' character is missing in -EINVAL.

Fixes: fc7214c3c9 ("wifi: iwlwifi: read DSM functions from UEFI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/f0391316-ab30-4664-96ac-03445ab2aeba@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
37c37096ad wifi: mac80211: don't use sband->band early 
Some drivers may (notably mt76 does) not set up sband->band
before registering, and cfg80211 will fill it in later. But
since the HT/HE capability check mac80211 required it to be
initialized already, otherwise failing things.  This really
isn't necessary though since the code is iterating the list
of bands, and has the 'band' variable available.  Fix it to
not require the sband->band to be initialized already.

Fixes: f04d2c247e ("wifi: mac80211: disallow drivers with HT wider than HE")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Debugged-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218466
Link: https://msgid.link/20240207115920.43cbedffb5c3.I4968e12275a3f95926e3f3ccae81e50f23fe4d4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
84d3776ef7 wifi: mac80211_hwsim: add missing kernel-doc 
Some kernel-doc is missing here, add it.

Link: https://msgid.link/20240206134555.eb95c1dfc1f0.Ibaf8b3249d9de59358bf6503fe4a186d9ac6544d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
03145a1d5d wifi: mac80211: add missing kernel-doc for fast_tx_check 
This was added earlier, add kernel-doc for it.

Link: https://msgid.link/20240206134555.6354b0ac8610.Ib90d3651834c556b73697388f59bd396a1f6f9b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
91cdcbbcde wifi: mac80211: clarify vif handling in TX dequeue 
The vif pointer at least looks like it can actually be NULL
in some cases such as the monitor-mode vif, causing static
checkers to complain with the immediate derefence. In these
cases the sta pointer will also be NULL, but clarify it in
the code anyway.

Link: https://msgid.link/20240131164910.60066625a239.Idfb6a5a9876f9f631eae760055e1c4018259a971@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
55167a3eed wifi: mac80211: allow CSA to same channel 
This could be used e.g. for temporarily sending quiet
(mode=1 in CSA/ECSA), or updating bandwidth. This is
also useful for testing, since it's something that an
AP may do and the client needs to be prepared. Simply
allow it.

Link: https://msgid.link/20240129203544.ef7258d5790d.Idafe22e41621757458d4960659b9621853f7104d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
ea8af8be42 wifi: mac80211: convert ieee80211_ie_build_eht_cap() to SKB use 
Convert ieee80211_ie_build_eht_cap() to the SKB-put function
style, renaming it to ieee80211_put_eht_cap().

Link: https://msgid.link/20240129202041.ece9769e3c94.Ibd17bea6311f0c7ba56f6c1803fa3208abaaebb9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
28aa895bb0 wifi: mac80211: convert ieee80211_ie_build_he_cap() to SKB use 
Convert ieee80211_ie_build_he_cap() to the SKB-put function
style, renaming it to ieee80211_put_he_cap().

Link: https://msgid.link/20240129202041.e6ef888980d9.Ied9e014314b5d27611e693e3d4cb63bdc8d7de17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:44 +01:00
Johannes Berg
9d0480a7c0 wifi: mac80211: move element parsing to a new file 
This code got really big, move it to a new file.
Pure code move.

Link: https://msgid.link/20240129202041.7f27f7c895e4.I0adfc28bd656a4d44c2bf47966277eecf56cbaa0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:43 +01:00
Johannes Berg
07095d1677 wifi: mac80211: start building elements in SKBs 
The building of elements is really mess, and really the only
reason we're not doing it in SKBs in the first place is that
the scan code in ieee80211_build_preq_ies() doesn't.

Convert ieee80211_build_preq_ies() to use an SKB internally
so that we can gradually convert other things to ..._put_*()
style interfaces.

Link: https://msgid.link/20240129202041.c3a8e3c2cc99.I9d9920858c30ae5154719783933de0d7bc2a2cb9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:43 +01:00
Johannes Berg
147ceae205 wifi: mac80211: simplify adding supported rates 
Make this a new-style "put" function, and change the
parameters to pass more information directly, this
makes it usable also for the MLME code.

Link: https://msgid.link/20240129202041.f604a03bd728.I8c798ea45b8479ac9982e77d0378af11a09ccdaf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:43 +01:00
Johannes Berg
e0b5ee9187 wifi: mac80211: tdls: use ieee80211_put_he_6ghz_cap() 
We don't need to use the write function here since we already
have an SKB, so use ieee80211_put_he_6ghz_cap() with the SMPS
mode taken from the link we're using.

Link: https://msgid.link/20240129202041.6454ac78ff8c.I7152e3c27645105478c68d40ca493feb27cac6bf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2024-02-08 15:00:43 +01:00