When an output buffer contains error frame header,
v4l2_jpeg_parse_header() will return error, then driver will mark this
buffer and a capture buffer done with error flag in device_run().
But if the error occurs in the first frames, before setup the capture
queue, there is no chance to schedule device_run(), and there may be no
capture to mark error.
So we need to drop this buffer with error flag, and make the decoding
can continue.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mediatek devices that support HEVC also support the main still picture
profile, but today, the main still picture profile is excluded.
This removes the skip mask for HEVC, and enables the main still
picture profile decoding.
Signed-off-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CRU block on the Renesas RZ/G3E SoC is similar to the one found on
the Renesas RZ/G2L SoC, with the following differences:
- Additional registers rzg3e_cru_regs.
- A different irq handler rzg3e_cru_irq.
- A different rzg3e_cru_csi2_setup.
- A different max input width.
- Additional stride register.
Introduce rzg3e_cru_info struct to handle differences between RZ/G2L
and RZ/G3E and related RZ/G3E functions:
- rzg3e_cru_enable_interrupts()
- rzg3e_cru_enable_interrupts()
- rz3e_fifo_empty()
- rzg3e_cru_csi2_setup()
- rzg3e_cru_get_current_slot()
Add then support for the RZ/G3E SoC CRU block with the new compatible
string "renesas,r9a09g047-cru".
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-18-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add `irq_handler` to the `rzg2l_cru_info` structure and pass it as part of
the OF data. This prepares for supporting RZ/G3E and RZ/V2H(P) SoCs, which
require a different IRQ handler. Update the IRQ request code to use the
handler from the OF data.
Add `enable_interrupts` and `disable_interrupts` function pointers to the
`rzg2l_cru_info` structure and pass them as part of the OF data. This
prepares for supporting RZ/G3E and RZ/V2H(P) SoCs, which require different
interrupt configurations.
Implement `rzg2l_cru_enable_interrupts()` and
`rzg2l_cru_disable_interrupts()` functions and update the code to use them
instead of directly writing to interrupt registers.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-15-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding support for the RZ/V2H(P) SoC, where the D-PHY
differs from the existing RZ/G2L implementation, introduce a new
rzg2l_csi2_info structure. This structure provides function pointers for
SoC-specific D-PHY enable and disable operations.
Modify rzg2l_csi2_dphy_setting() to use these function pointers instead of
calling rzg2l_csi2_dphy_enable() and rzg2l_csi2_dphy_disable() directly.
Update the device match table to store the appropriate function pointers
for each compatible SoC.
This change prepares the driver for future extensions without affecting
the current functionality for RZ/G2L.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-9-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CRU block found on the Renesas RZ/G3E ("R9A09G047") SoC has five
interrupts:
- image_conv: image_conv irq
- axi_mst_err: AXI master error level irq
- vd_addr_wend: Video data AXI master addr 0 write end irq
- sd_addr_wend: Statistics data AXI master addr 0 write end irq
- vsd_addr_wend: Video statistics data AXI master addr 0 write end irq
This IP has only one input port 'port@1' similar to the RZ/G2UL CRU.
Document the CRU block found on the Renesas RZ/G3E ("R9A09G047") SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-4-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There are two ways to switch GDSC mode. One is to write the POWER_CONTROL
register and the other is to use dev_pm_genpd_set_hwmode(). However, they
rely on different clock driver flags. dev_pm_genpd_set_hwmode() depends on
the HW_CTRL_TRIGGER flag and POWER_CONTROL register depends on the HW_CTRL
flag.
By default, the dev_pm_genpd_set_hwmode() is used to switch the GDSC mode.
If it fails and dev_pm_genpd_set_hwmode() returns -EOPNOTSUPP, it means
that the clock driver uses the HW_CTRL flag. At this time, the GDSC mode
is switched to write the POWER_CONTROL register.
Clock driver is using HW_CTRL_TRIGGER flag with V6. So hwmode_dev is
always true on using V6 platform. Conversely, if hwmode_dev is false, this
platform must be not using V6. Therefore, replace IS_V6 in poweroff_coreid
with hwmode_dev. Also, with HW_CTRL_TRIGGER flag, the vcodec gdsc gets
enabled in SW mode by default. Therefore, before disabling the GDSC, GDSC
should be switched to SW mode so that GDSC gets enabled in SW mode in the
next enable.
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
[bod: added media prefix]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For the seek case, the input port will be called stream_off and then
stream_on in the driver. Firmware will flush all buffers during stream_off
input port. Therefore, driver needs to queue DPB buffers to firmware
during stream_on input port to ensure that decoder can decode normally
when it receives enough input and output buffers. Otherwise, decoder
will not be able to decode due to lack of DPB buffer even if there are
enough input and output buffers.
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
[bod: added media prefix]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Video device registering has been moved earlier in the probe function,
but the new order has not been propagated to error handling. This means
we can end with unreleased resources on error (e.g dangling video device
on missing firmware probe aborting).
Fixes: 08b1cf474b ("media: venus: core, venc, vdec: Fix probe dependency error")
Cc: stable@vger.kernel.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
QCS615 uses the same video core as SC7180.
Therefore, add qcom,qcs615-venus compatible to qcom,sc7180-venus.yaml to
enable video hardware support on QCS615 platform. Make qcom,qcs615-venus
fallback to qcom,sc7180-venus to ensure compatibility with existing
configurations.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For various SoC skews at 4nm CSIPHY 2.1.2 is used. Add in the init sequence
with base control reg offset of 0x1000.
This initial version will support X1E80100. Take the silicon verification
PHY init parameters as a first/best guess pass.
SKEW_CAL is included as received from the qcom silicon init sequence.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently we have an s32 value called delay which has been inherited from
the CamX code for PHY init. This unused value relates to a post-write delay
latching time.
In the silicon test-bench which provides the basis for the CamX code the
write settle times are specified in nanoseconds.
In the upstream kernel we currently take no notice of the delay value and
use all zero in any case.
Nanosecond granularity timing from the perspective of the kernel is total
overkill, however for some PHY init sequences introduction of a settle
delay has a use.
Add support to the 3ph init sequence for microsecond level delay. A
readback of written data would probably accomplish the same thing but,
since the PHY init sequences in the wild provide a delay value - we can
just add support here for that delay and consume the values given.
Generally these delays are probably not necessary but, they do speak to a
theoretical delay that silicon test-benches utilise and therefore are
worthwhile to replicate if the given PHY init sequence has the data.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add silicon enabling support for VFE680 as found on sm8450, x1e and
derivatives thereof.
References work from Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: fix minor checkpatch linelenght splat @ lines 21, 22]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the CSIPHY id property to find clock names instead of relying on
generating the clock names based on the control-loop index.
x1e80100 has CSIPHY0, CSIPHY1, CSIPHY2 and CSIPHY4 so simple index naming
won't work whereas and 'id' property allows any ordering and any stepping
between the CSIPHY names.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In various places in CAMSS we assume a linear set of declared devices
{csiphy0, csiphy1, csiphy2} which currently works for upstream SoCs but for
upcoming SoCs some of the SoC resources will result in a set such as
{csiphy0, csiphy2} which will break the naive for() loops we have.
Introduce an identity property which resource declarations can populate
hence facilitating non-linear resource naming.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A recent commit refactored the printing of the VFE hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in several hundred lines of repeated log spam during boot
and use, for example, on the Lenovo ThinkPad X13s:
qcom-camss ac5a000.camss: VFE:1 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:0 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:3 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:4 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
...
Suppress the version logging by demoting to debug level again.
Fixes: 10693fed12 ("media: qcom: camss: vfe: Move common code into vfe core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A recent commit refactored the printing of the CSID hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in repeated log spam during use, for example, on the Lenovo
ThinkPad X13s:
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
Suppress the version logging by demoting to debug level again.
Fixes: f759b8fd30 ("media: qcom: camss: csid: Move common code into csid core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CSIPHY of Qualcomm SoCs support both D-PHY and C-PHY standards for
CSI-2, but not any others so restrict the bus-type property describing
this to the supported values.
The only exception here is MSM8916 which only supports D-PHY. C-PHY was
introduced with newer SoCs.
Do note, that currently the Linux driver only supports D-PHY.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There's some crossover between venus and iris, I'd like to help out with
the reviews for iris to ensure we keep upstream chugging along.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stan has stepped back from active venus development as a result I'd like to
volunteer my help in keeping venus maintained upstream.
Discussing with the qcom team on this we agreed
+M for Dikshita
+R for me
Many thanks to Stan for his hard work over the years from originating this
driver upstream to his many years of maintenance of it too.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The vsi (video shared information) struct needs to be synchronized
between firmware and host, as a change that is only done in the host
version of the struct but isn't synchronized to the firmware. This can
lead to decoding issues with H264 bitstreams. Highlight this requirement
within the struct descriptions.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a new extended vsi_ext struct besides the existing vsi struct, to
enable calculating the end of the address range of the current working
buffer for architectures, where simply adding the buffer size to the
start of the address range isn't sufficient.
Additionally, on extended architectures, the NAL information can be
fetched directly from the firmware, which allows skipping the parsing
step within the kernel.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extend the VSI (video shared information) struct to allow sending slice
parameters to SCP, as the parameters have changed on MT8188 architecture.
Remove VSI related information from the common interface to ensure that
the interface is usable by architectures with and without the extended
parameters. The new VSI extensions will be introduced in later patches.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The framebuffer size for decoder instances was being incorrectly set -
inst->vsi_core->fb.y.size was assigned twice consecutively.
Assign the second picinfo framebuffer size to the C framebuffer instead,
which appears to be the intended target based on the surrounding code.
Fixes: 2674486aac ("media: mediatek: vcodec: support stateless hevc decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
