As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
Pull module updates from Luis Chamberlain:
"There are a few fixes / cleanups from Vincent, Chunhui, and Petr, but
the most important part of this pull request is the Rust community
stepping up to help maintain both C / Rust code for future Rust module
support. We grow the set of modules maintainers by three now, and with
this hope to scale to help address what's needed to properly support
future Rust module support.
A lot of exciting stuff coming in future kernel releases.
This has been on linux-next for ~ 3 weeks now with no issues"
* tag 'modules-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Refine kmemleak scanned areas
module: abort module loading when sysfs setup suffer errors
MAINTAINERS: scale modules with more reviewers
module: Clean up the description of MODULE_SIG_<type>
module: Split modules_install compression and in-kernel decompression
Pull fbdev fixes from Helge Deller:
- crash fix in fbcon_putcs
- avoid a possible string memory overflow in sisfb
- minor code optimizations in omapfb and fbcon
* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: sisfb: Fix strbuf array overflow
fbcon: break earlier in search_fb_in_map and search_for_mapped_con
fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
Pull drm fixes from Dave Airlie:
"Regular fixes for the week to end the merge window, i915 and xe have a
few each, amdgpu makes up most of it with a bunch of SR-IOV related
fixes amongst others.
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe:
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
- CU occupancy logic fix
- SDMA queue fix"
* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
drm/amd/pm: update workload mask after the setting
drm/amdgpu: bump driver version for cleared VRAM
drm/amdgpu: fix vbios fetching for SR-IOV
drm/amdgpu: fix PTE copy corruption for sdma 7
drm/amdkfd: Add SDMA queue quantum support for GFX12
drm/amdgpu/vcn: enable AV1 on both instances
drm/amdkfd: Fix CU occupancy for GFX 9.4.3
drm/amdkfd: Update logic for CU occupancy calculations
drm/amdgpu: skip coredump after job timeout in SRIOV
drm/amdgpu: sync to KFD fences before clearing PTEs
drm/amdgpu/mes12: set enable_level_process_quantum_check
drm/i915/dp: Fix colorimetry detection
drm/amdgpu/mes12: reduce timeout
drm/amdgpu/mes11: reduce timeout
drm/amdgpu: use GEM references instead of TTMs v2
drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
drm/amdgpu: update golden regs for gfx12
drm/amdgpu: clean up vbios fetching code
drm/amd/display: handle nulled pipe context in DCE110's set_drr()
...
Pull ceph updates from Ilya Dryomov:
"Three CephFS fixes from Xiubo and Luis and a bunch of assorted
cleanups"
* tag 'ceph-for-6.12-rc1' of https://github.com/ceph/ceph-client:
ceph: remove the incorrect Fw reference check when dirtying pages
ceph: Remove empty definition in header file
ceph: Fix typo in the comment
ceph: fix a memory leak on cap_auths in MDS client
ceph: flush all caps releases when syncing the whole filesystem
ceph: rename ceph_flush_cap_releases() to ceph_flush_session_cap_releases()
libceph: use min() to simplify code in ceph_dns_resolve_name()
ceph: Convert to use jiffies macro
ceph: Remove unused declarations
Pull smb server fixes from Steve French:
- fix querying dentry for char/block special files
- small cleanup patches
* tag 'v6.12-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Correct typos in multiple comments across various files
ksmbd: fix open failure from block and char device file
ksmbd: remove unsafe_memcpy use in session setup
ksmbd: Replace one-element arrays with flexible-array members
ksmbd: fix warning: comparison of distinct pointer types lacks a cast
Pull xmb client fixes from Steve French:
- Noisy log message cleanup
- Important netfs fix for cifs crash in generic/074
- Three minor improvements to use of hashing (multichannel and mount
improvements)
- Fix decryption crash for large read with small esize
* tag '6.12rc-more-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: make SHA-512 TFM ephemeral
smb: client: make HMAC-MD5 TFM ephemeral
smb: client: stop flooding dmesg in smb2_calc_signature()
smb: client: allocate crypto only for primary server
smb: client: fix UAF in async decryption
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs)
The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull power management fix from Rafael Wysocki:
"Fix idle states enumeration in the intel_idle driver on platforms
supporting multiple flavors of the C6 idle state (Artem Bityutskiy)"
* tag 'pm-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: fix ACPI _CST matching for newer Xeon platforms
Pull UML updates from Richard Weinberger:
- Removal of dead code (TT mode leftovers, etc)
- Fixes for the network vector driver
- Fixes for time-travel mode
* tag 'uml-for-linus-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: fix time-travel syscall scheduling hack
um: Remove outdated asm/sysrq.h header
um: Remove the declaration of user_thread function
um: Remove the call to SUBARCH_EXECVE1 macro
um: Remove unused mm_fd field from mm_id
um: Remove unused fields from thread_struct
um: Remove the redundant newpage check in update_pte_range
um: Remove unused kpte_clear_flush macro
um: Remove obsoleted declaration for execute_syscall_skas
user_mode_linux_howto_v2: add VDE vector support in doc
vector_user: add VDE support
um: remove ARCH_NO_PREEMPT_DYNAMIC
um: vector: Fix NAPI budget handling
um: vector: Replace locks guarding queue depth with atomics
um: remove variable stack array in os_rcv_fd_msg()
Pull more random number generator updates from Jason Donenfeld:
- Christophe realized that the LoongArch64 instructions could be
scheduled more similar to how GCC generates code, which Ruoyao
implemented, for a 5% speedup from basically some rearrangements
- An update to MAINTAINERS to match the right files
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
LoongArch: vDSO: Tune chacha implementation
MAINTAINERS: make vDSO getrandom matches more generic
Pull bitmap updates from Yury Norov:
- switch all bitmamp APIs from inline to __always_inline (Brian Norris)
The __always_inline series improves on code generation, and now with
the latest compiler versions is required to avoid compilation
warnings. It spent enough in my backlog, and I'm thankful to Brian
Norris for taking over and moving it forward.
- introduce GENMASK_U128() macro (Anshuman Khandual)
GENMASK_U128() is a prerequisite needed for arm64 development
* tag 'bitmap-for-6.12' of https://github.com/norov/linux:
lib/test_bits.c: Add tests for GENMASK_U128()
uapi: Define GENMASK_U128
nodemask: Switch from inline to __always_inline
cpumask: Switch from inline to __always_inline
bitmap: Switch from inline to __always_inline
find: Switch from inline to __always_inline
Pull tomoyo updates from Tetsuo Handa:
"One bugfix patch, one preparation patch, and one conversion patch.
TOMOYO is useful as an analysis tool for learning how a Linux system
works. My boss was hoping that SELinux's policy is generated from what
TOMOYO has observed. A translated paper describing it is available at
https://master.dl.sourceforge.net/project/tomoyo/docs/nsf2003-en.pdf/nsf2003-en.pdf?viasf=1
Although that attempt failed due to mapping problem between inode and
pathname, TOMOYO remains as an access restriction tool due to ability
to write custom policy by individuals.
I was delivering pure LKM version of TOMOYO (named AKARI) to users who
cannot afford rebuilding their distro kernels with TOMOYO enabled. But
since the LSM framework was converted to static calls, it became more
difficult to deliver AKARI to such users. Therefore, I decided to
update TOMOYO so that people can use mostly LKM version of TOMOYO with
minimal burden for both distributors and users"
* tag 'tomoyo-pr-20240927' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: fallback to realpath if symlink's pathname does not exist
tomoyo: allow building as a loadable LSM module
tomoyo: preparation step for building as a loadable LSM module
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
Pull misc fixes from Andrew Morton:
"19 hotfixes. 13 are cc:stable.
There's a focus on fixes for the memfd_pin_folios() work which was
added into 6.11. Apart from that, the usual shower of singleton fixes"
* tag 'mm-hotfixes-stable-2024-09-27-09-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix uninit-value in ocfs2_get_block()
zram: don't free statically defined names
memory tiers: use default_dram_perf_ref_source in log message
Revert "list: test: fix tests for list_cut_position()"
kselftests: mm: fix wrong __NR_userfaultfd value
compiler.h: specify correct attribute for .rodata..c_jump_table
mm/damon/Kconfig: update DAMON doc URL
mm: kfence: fix elapsed time for allocated/freed track
ocfs2: fix deadlock in ocfs2_get_system_file_inode
ocfs2: reserve space for inline xattr before attaching reflink tree
mm: migrate: annotate data-race in migrate_folio_unmap()
mm/hugetlb: simplify refs in memfd_alloc_folio
mm/gup: fix memfd_pin_folios alloc race panic
mm/gup: fix memfd_pin_folios hugetlb page allocation
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
mm/filemap: fix filemap_get_folios_contig THP panic
mm: make SPLIT_PTE_PTLOCKS depend on SMP
tools: fix shared radix-tree build
Pull LoongArch updates from Huacai Chen:
- Fix objtool about do_syscall() and Clang
- Enable generic CPU vulnerabilites support
- Enable ACPI BGRT handling
- Rework CPU feature probe from CPUCFG/IOCSR
- Add ARCH_HAS_SET_MEMORY support
- Add ARCH_HAS_SET_DIRECT_MAP support
- Improve hardware page table walker
- Simplify _percpu_read() and _percpu_write()
- Add advanced extended IRQ model documentions
- Some bug fixes and other small changes
* tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/LoongArch: Add advanced extended IRQ model description
LoongArch: Remove posix_types.h include from sigcontext.h
LoongArch: Fix memleak in pci_acpi_scan_root()
LoongArch: Simplify _percpu_read() and _percpu_write()
LoongArch: Improve hardware page table walker
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
LoongArch: Add ARCH_HAS_SET_MEMORY support
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
LoongArch: Enable ACPI BGRT handling
LoongArch: Enable generic CPU vulnerabilites support
LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall)
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
LoongArch: Enable objtool for Clang
objtool: Handle frame pointer related instructions
Pull sh updates from John Paul Adrian Glaubitz:
"The first change by Gaosheng Cui removes unused declarations which
have been obsoleted since commit 5a4053b232 ("sh: Kill off dead
boards.") and the second by his colleague Hongbo Li replaces the use
of the unsafe simple_strtoul() with the safer kstrtoul() function in
the sh interrupt controller driver code"
* tag 'sh-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Replace simple_strtoul() with kstrtoul()
sh: Remove unused declarations for make_maskreg_irq() and irq_mask_register
Pull more xen updates from Juergen Gross:
"A second round of Xen related changes and features:
- a small fix of the xen-pciback driver for a warning issued by
sparse
- support PCI passthrough when using a PVH dom0
- enable loading the kernel in PVH mode at arbitrary addresses,
avoiding conflicts with the memory map when running as a Xen dom0
using the host memory layout"
* tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pvh: Add 64bit relocation page tables
x86/kernel: Move page table macros to header
x86/pvh: Set phys_base when calling xen_prepare_pvh()
x86/pvh: Make PVH entrypoint PIC for x86-64
xen: sync elfnote.h from xen tree
xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
xen/privcmd: Add new syscall to get gsi from dev
xen/pvh: Setup gsi for passthrough device
xen/pci: Add a function to reset device for xen
Pull device mapper updates from Mikulas Patocka:
- Misc VDO fixes
- Remove unused declarations dm_get_rq_mapinfo() and dm_zone_map_bio()
- Dm-delay: Improve kernel documentation
- Dm-crypt: Allow to specify the integrity key size as an option
- Dm-bufio: Remove pointless NULL check
- Small code cleanups: Use ERR_CAST; remove unlikely() around IS_ERR;
use __assign_bit
- Dm-integrity: Fix gcc 5 warning; convert comma to semicolon; fix
smatch warning
- Dm-integrity: Support recalculation in the 'I' mode
- Revert "dm: requeue IO if mapping table not yet available"
- Dm-crypt: Small refactoring to make the code more readable
- Dm-cache: Remove pointless error check
- Dm: Fix spelling errors
- Dm-verity: Restart or panic on an I/O error if restart or panic was
requested
- Dm-verity: Fallback to platform keyring also if key in trusted
keyring is rejected
* tag 'for-6.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm verity: fallback to platform keyring also if key in trusted keyring is rejected
dm-verity: restart or panic on an I/O error
dm: fix spelling errors
dm-cache: remove pointless error check
dm vdo: handle unaligned discards correctly
dm vdo indexer: Convert comma to semicolon
dm-crypt: Use common error handling code in crypt_set_keyring_key()
dm-crypt: Use up_read() together with key_put() only once in crypt_set_keyring_key()
Revert "dm: requeue IO if mapping table not yet available"
dm-integrity: check mac_size against HASH_MAX_DIGESTSIZE in sb_mac()
dm-integrity: support recalculation in the 'I' mode
dm integrity: Convert comma to semicolon
dm integrity: fix gcc 5 warning
dm: Make use of __assign_bit() API
dm integrity: Remove extra unlikely helper
dm: Convert to use ERR_CAST()
dm bufio: Remove NULL check of list_entry()
dm-crypt: Allow to specify the integrity key size as option
dm: Remove unused declaration and empty definition "dm_zone_map_bio"
dm delay: enhance kernel documentation
...
Pull ata fixes from Damien Le Moal:
- Fix a NULL pointer dereference introduced by the recent cleanups of
the command duration limits feature handling (me)
- Fix incorrect generation of the mode sense data for the
ALL_SUB_MPAGES page (me)
* tag 'ata-6.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
ata: libata-scsi: Fix ata_msense_control_spgt2()
Pull driver core updates from Greg KH:
"Here is a small set of patches for the driver core code for 6.12-rc1.
This set is the one that caused the most delay on my side, due to lots
of last-minute reports of problems in the async shutdown feature that
was added. In the end, I've reverted all of the patches in that series
so we are back to "normal" and the patch set is being reworked for the
next merge window.
Other than the async shutdown patches that were reverted, included in
here are:
- minor driver core cleanups
- minor driver core bus and class api cleanups and simplifications
for some callbacks
- some const markings of structures
- other even more minor cleanups
All of these, including the last minute reverts, have been in
linux-next, but all of the reports of problems in linux-next were
before the reverts happened. After the reverts, all is good"
* tag 'driver-core-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "driver core: don't always lock parent in shutdown"
Revert "driver core: separate function to shutdown one device"
Revert "driver core: shut down devices asynchronously"
Revert "nvme-pci: Make driver prefer asynchronous shutdown"
Revert "driver core: fix async device shutdown hang"
driver core: fix async device shutdown hang
driver core: attribute_container: Remove unused functions
driver core: Trivially simplify ((struct device_private *)curr)->device->p to @curr
devres: Correclty strip percpu address space of devm_free_percpu() argument
driver core: Make parameter check consistent for API cluster device_(for_each|find)_child()
bus: fsl-mc: make fsl_mc_bus_type const
nvme-pci: Make driver prefer asynchronous shutdown
driver core: shut down devices asynchronously
driver core: separate function to shutdown one device
driver core: don't always lock parent in shutdown
platform: Make platform_bus_type constant
driver core: class: Check namespace relevant parameters in class_register()
driver:base:core: Adding a "Return:" line in comment for device_link_add()
drivers/base: Introduce device_match_t for device finding APIs
firmware_loader: Block path traversal
...
The warning
Documentation/virt/kvm/locking.rst:31: ERROR: Unexpected indentation.
is caused by incorrectly treating a line as the continuation of a paragraph,
rather than as the first line in a bullet list.
Fixed: 44d1745962 ("KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SHA-512 shash TFM is used only briefly during Session Setup stage,
when computing SMB 3.1.1 preauth hash.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside smb311_update_preauth_hash().
This also makes smb311_crypto_shash_allocate() redundant, so expose
smb3_crypto_shash_allocate() and use that.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The HMAC-MD5 shash TFM is used only briefly during Session Setup stage,
when computing NTLMv2 hashes.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside setup_ntlmv2_rsp().
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When having several mounts that share same credential and the client
couldn't re-establish an SMB session due to an expired kerberos ticket
or rotated password, smb2_calc_signature() will end up flooding dmesg
when not finding SMB sessions to calculate signatures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For extra channels, point ->secmech.{enc,dec} to the primary
server ones.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
In netfslib, a buffered writeback operation has a 'write queue' of folios
that are being written, held in a linear sequence of folio_queue structs.
The 'issuer' adds new folio_queues on the leading edge of the queue and
populates each one progressively; the 'collector' pops them off the
trailing edge and discards them and the folios they point to as they are
consumed.
The queue is required to always retain at least one folio_queue structure.
This allows the queue to be accessed without locking and with just a bit of
barriering.
When a new subrequest is prepared, its ->io_iter iterator is pointed at the
current end of the write queue and then the iterator is extended as more
data is added to the queue until the subrequest is committed.
Now, the problem is that the folio_queue at the leading edge of the write
queue when a subrequest is prepared might have been entirely consumed - but
not yet removed from the queue as it is the only remaining one and is
preventing the queue from collapsing.
So, what happens is that subreq->io_iter is pointed at the spent
folio_queue, then a new folio_queue is added, and, at that point, the
collector is at entirely at liberty to immediately delete the spent
folio_queue.
This leaves the subreq->io_iter pointing at a freed object. If the system
is lucky, iterate_folioq() sees ->io_iter, sees the as-yet uncorrupted
freed object and advances to the next folio_queue in the queue.
In the case seen, however, the freed object gets recycled and put back onto
the queue at the tail and filled to the end. This confuses
iterate_folioq() and it tries to step ->next, which may be NULL - resulting
in an oops.
Fix this by the following means:
(1) When preparing a write subrequest, make sure there's a folio_queue
struct with space in it at the leading edge of the queue. A function
to make space is split out of the function to append a folio so that
it can be called for this purpose.
(2) If the request struct iterator is pointing to a completely spent
folio_queue when we make space, then advance the iterator to the newly
allocated folio_queue. The subrequest's iterator will then be set
from this.
The oops could be triggered using the generic/346 xfstest with a filesystem
on9P over TCP with cache=loose. The oops looked something like:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:_copy_from_iter+0x2db/0x530
...
Call Trace:
<TASK>
...
p9pdu_vwritef+0x3d8/0x5d0
p9_client_prepare_req+0xa8/0x140
p9_client_rpc+0x81/0x280
p9_client_write+0xcf/0x1c0
v9fs_issue_write+0x87/0xc0
netfs_advance_write+0xa0/0xb0
netfs_write_folio.isra.0+0x42d/0x500
netfs_writepages+0x15a/0x1f0
do_writepages+0xd1/0x220
filemap_fdatawrite_wbc+0x5c/0x80
v9fs_mmap_vm_close+0x7d/0xb0
remove_vma+0x35/0x70
vms_complete_munmap_vmas+0x11a/0x170
do_vmi_align_munmap+0x17d/0x1c0
do_vmi_munmap+0x13e/0x150
__vm_munmap+0x92/0xd0
__x64_sys_munmap+0x17/0x20
do_syscall_64+0x80/0xe0
entry_SYSCALL_64_after_hwframe+0x71/0x79
This also fixed a similar-looking issue with cifs and generic/074.
Fixes: cd0277ed0c ("netfs: Use new folio_queue data type and iterator instead of xarray iter")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409180928.f20b5a08-oliver.sang@intel.com
Closes: https://lore.kernel.org/oe-lkp/202409131438.3f225fbf-oliver.sang@intel.com
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kernel test robot <oliver.sang@intel.com>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
SR-IOV fetches the vbios from VRAM in some cases.
Re-enable the VRAM path for dGPUs and rename the function
to make it clear that it is not IGP specific.
Fixes: 042658d17a ("drm/amdgpu: clean up vbios fetching code")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
syzbot reported an uninit-value BUG:
BUG: KMSAN: uninit-value in ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159
ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159
do_mpage_readpage+0xc45/0x2780 fs/mpage.c:225
mpage_readahead+0x43f/0x840 fs/mpage.c:374
ocfs2_readahead+0x269/0x320 fs/ocfs2/aops.c:381
read_pages+0x193/0x1110 mm/readahead.c:160
page_cache_ra_unbounded+0x901/0x9f0 mm/readahead.c:273
do_page_cache_ra mm/readahead.c:303 [inline]
force_page_cache_ra+0x3b1/0x4b0 mm/readahead.c:332
force_page_cache_readahead mm/internal.h:347 [inline]
generic_fadvise+0x6b0/0xa90 mm/fadvise.c:106
vfs_fadvise mm/fadvise.c:185 [inline]
ksys_fadvise64_64 mm/fadvise.c:199 [inline]
__do_sys_fadvise64 mm/fadvise.c:214 [inline]
__se_sys_fadvise64 mm/fadvise.c:212 [inline]
__x64_sys_fadvise64+0x1fb/0x3a0 mm/fadvise.c:212
x64_sys_call+0xe11/0x3ba0
arch/x86/include/generated/asm/syscalls_64.h:222
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because when ocfs2_extent_map_get_blocks() fails, p_blkno is
uninitialized. So the error log will trigger the above uninit-value
access.
The error log is out-of-date since get_blocks() was removed long time ago.
And the error code will be logged in ocfs2_extent_map_get_blocks() once
ocfs2_get_cluster() fails, so fix this by only logging inode and block.
Link: https://syzkaller.appspot.com/bug?extid=9709e73bae885b05314b
Link: https://lkml.kernel.org/r/20240925090600.3643376-1-joseph.qi@linux.alibaba.com
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com
Tested-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 3718c02dbd ("acpi, hmat: calculate abstract distance with HMAT")
added a default_dram_perf_ref_source variable that was initialized but
never used. This causes kmemleak to report the following memory leak:
unreferenced object 0xff11000225a47b60 (size 16):
comm "swapper/0", pid 1, jiffies 4294761654
hex dump (first 16 bytes):
41 43 50 49 20 48 4d 41 54 00 c1 4b 7d b7 75 7c ACPI HMAT..K}.u|
backtrace (crc e6d0e7b2):
[<ffffffff95d5afdb>] __kmalloc_node_track_caller_noprof+0x36b/0x440
[<ffffffff95c276d6>] kstrdup+0x36/0x60
[<ffffffff95dfabfa>] mt_set_default_dram_perf+0x23a/0x2c0
[<ffffffff9ad64733>] hmat_init+0x2b3/0x660
[<ffffffff95203cec>] do_one_initcall+0x11c/0x5c0
[<ffffffff9ac9cfc4>] do_initcalls+0x1b4/0x1f0
[<ffffffff9ac9d52e>] kernel_init_freeable+0x4ae/0x520
[<ffffffff97c789cc>] kernel_init+0x1c/0x150
[<ffffffff952aecd1>] ret_from_fork+0x31/0x70
[<ffffffff9520b18a>] ret_from_fork_asm+0x1a/0x30
This reminds us that we forget to use the performance data source
information. So, use the variable in the error log message to help
identify the root cause of inconsistent performance number.
Link: https://lkml.kernel.org/r/87y13mvo0n.fsf@yhuang6-desk2.ccr.corp.intel.com
Fixes: 3718c02dbd ("acpi, hmat: calculate abstract distance with HMAT")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit e620799c41.
The commit introduces unit test failures.
Expected cur == &entries[i], but
cur == 0000037fffadfd80
&entries[i] == 0000037fffadfd60
# list_test_list_cut_position: pass:0 fail:1 skip:0 total:1
not ok 21 list_test_list_cut_position
# list_test_list_cut_before: EXPECTATION FAILED at lib/list-test.c:444
Expected cur == &entries[i], but
cur == 0000037fffa9fd70
&entries[i] == 0000037fffa9fd60
# list_test_list_cut_before: EXPECTATION FAILED at lib/list-test.c:444
Expected cur == &entries[i], but
cur == 0000037fffa9fd80
&entries[i] == 0000037fffa9fd70
Revert it.
Link: https://lkml.kernel.org/r/20240922150507.553814-1-linux@roeck-us.net
Fixes: e620799c41 ("list: test: fix tests for list_cut_position()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: I Hsin Cheng <richard120310@gmail.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes: a5c6bc5900 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, there is an assembler message when generating kernel/bpf/core.o
under CONFIG_OBJTOOL with LoongArch compiler toolchain:
Warning: setting incorrect section attributes for .rodata..c_jump_table
This is because the section ".rodata..c_jump_table" should be readonly,
but there is a "W" (writable) part of the flags:
$ readelf -S kernel/bpf/core.o | grep -A 1 "rodata..c"
[34] .rodata..c_j[...] PROGBITS 0000000000000000 0000d2e0
0000000000000800 0000000000000000 WA 0 0 8
There is no above issue on x86 due to the generated section flag is only
"A" (allocatable). In order to silence the warning on LoongArch, specify
the attribute like ".rodata..c_jump_table,\"a\",@progbits #" explicitly,
then the section attribute of ".rodata..c_jump_table" must be readonly
in the kernel/bpf/core.o file.
Before:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, DATA
After:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, READONLY, DATA
By the way, AFAICT, maybe the root cause is related with the different
compiler behavior of various archs, so to some extent this change is a
workaround for LoongArch, and also there is no effect for x86 which is the
only port supported by objtool before LoongArch with this patch.
Link: https://lkml.kernel.org/r/20240924062710.1243-1-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> [6.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
One of our customers reported a crash and a corrupted ocfs2 filesystem.
The crash was due to the detection of corruption. Upon troubleshooting,
the fsck -fn output showed the below corruption
[EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record,
but fsck believes the largest valid value is 227. Clamp the next record value? n
The stat output from the debugfs.ocfs2 showed the following corruption
where the "Next Free Rec:" had overshot the "Count:" in the root metadata
block.
Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856)
FS Generation: 904309833 (0x35e6ac49)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x16) HasXattr InlineXattr Refcounted
Extended Attributes Block: 0 Extended Attributes Inline Size: 256
User: 0 (root) Group: 0 (root) Size: 281320357888
Links: 1 Clusters: 141738
ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024
atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024
mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024
dtime: 0x0 -- Wed Dec 31 17:00:00 1969
Refcount Block: 2777346
Last Extblk: 2886943 Orphan Slot: 0
Sub Alloc Slot: 0 Sub Alloc Bit: 14
Tree Depth: 1 Count: 227 Next Free Rec: 230
## Offset Clusters Block#
0 0 2310 2776351
1 2310 2139 2777375
2 4449 1221 2778399
3 5670 731 2779423
4 6401 566 2780447
....... .... .......
....... .... .......
The issue was in the reflink workfow while reserving space for inline
xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the
time this function is called the reflink tree is already recreated at the
destination inode from the source inode. At this point, this function
reserves space for inline xattrs at the destination inode without even
checking if there is space at the root metadata block. It simply reduces
the l_count from 243 to 227 thereby making space of 256 bytes for inline
xattr whereas the inode already has extents beyond this index (in this
case up to 230), thereby causing corruption.
The fix for this is to reserve space for inline metadata at the destination
inode before the reflink tree gets recreated. The customer has verified the
fix.
Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@oracle.com
Fixes: ef962df057 ("ocfs2: xattr: fix inlined xattr reflink")
Signed-off-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I found a report from syzbot [1]
This report shows that the value can be changed, but in reality, the
value of __folio_set_movable() cannot be changed because it holds the
folio refcount.
Therefore, it is appropriate to add an annotate to make KCSAN
ignore that data-race.
[1]
==================================================================
BUG: KCSAN: data-race in __filemap_remove_folio / migrate_pages_batch
write to 0xffffea0004b81dd8 of 8 bytes by task 6348 on cpu 0:
page_cache_delete mm/filemap.c:153 [inline]
__filemap_remove_folio+0x1ac/0x2c0 mm/filemap.c:233
filemap_remove_folio+0x6b/0x1f0 mm/filemap.c:265
truncate_inode_folio+0x42/0x50 mm/truncate.c:178
shmem_undo_range+0x25b/0xa70 mm/shmem.c:1028
shmem_truncate_range mm/shmem.c:1144 [inline]
shmem_evict_inode+0x14d/0x530 mm/shmem.c:1272
evict+0x2f0/0x580 fs/inode.c:731
iput_final fs/inode.c:1883 [inline]
iput+0x42a/0x5b0 fs/inode.c:1909
dentry_unlink_inode+0x24f/0x260 fs/dcache.c:412
__dentry_kill+0x18b/0x4c0 fs/dcache.c:615
dput+0x5c/0xd0 fs/dcache.c:857
__fput+0x3fb/0x6d0 fs/file_table.c:439
____fput+0x1c/0x30 fs/file_table.c:459
task_work_run+0x13a/0x1a0 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xbe/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffffea0004b81dd8 of 8 bytes by task 6342 on cpu 1:
__folio_test_movable include/linux/page-flags.h:699 [inline]
migrate_folio_unmap mm/migrate.c:1199 [inline]
migrate_pages_batch+0x24c/0x1940 mm/migrate.c:1797
migrate_pages_sync mm/migrate.c:1963 [inline]
migrate_pages+0xff1/0x1820 mm/migrate.c:2072
do_mbind mm/mempolicy.c:1390 [inline]
kernel_mbind mm/mempolicy.c:1533 [inline]
__do_sys_mbind mm/mempolicy.c:1607 [inline]
__se_sys_mbind+0xf76/0x1160 mm/mempolicy.c:1603
__x64_sys_mbind+0x78/0x90 mm/mempolicy.c:1603
x64_sys_call+0x2b4d/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:238
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0xffff888127601078 -> 0x0000000000000000
Link: https://lkml.kernel.org/r/20240924130053.107490-1-aha310510@gmail.com
Fixes: 7e2a5e5ab2 ("mm: migrate: use __folio_test_movable()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
