Now for dwmac-loongson {tx,rx}_fifo_size are uninitialised, which means
zero. This means dwmac-loongson doesn't support changing MTU because in
stmmac_change_mtu() it requires the fifo size be no less than MTU. Thus,
set the correct tx_fifo_size and rx_fifo_size for it (16KB multiplied by
queue counts).
Here {tx,rx}_fifo_size is initialised with the initial value (also the
maximum value) of {tx,rx}_queues_to_use. So it will keep as 16KB if we
don't change the queue count, and will be larger than 16KB if we change
(decrease) the queue count. However stmmac_change_mtu() still work well
with current logic (MTU cannot be larger than 16KB for stmmac).
Note: the Fixes tag picked here is the oldest commit and key commit of
the dwmac-loongson series "stmmac: Add Loongson platform support".
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250210134328.2755328-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 5d4cc87414 ("net: reorganize "struct sock" fields"),
the sk_tsflags field shares the same cacheline with sk_forward_alloc.
The UDP protocol does not acquire the sock lock in the RX path;
forward allocations are protected via the receive queue spinlock;
additionally udp_recvmsg() calls sock_recv_cmsgs() unconditionally
touching sk_tsflags on each packet reception.
Due to the above, under high packet rate traffic, when the BH and the
user-space process run on different CPUs, UDP packet reception
experiences a cache miss while accessing sk_tsflags.
The receive path doesn't strictly need to access the problematic field;
change sock_set_timestamping() to maintain the relevant information
in a newly allocated sk_flags bit, so that sock_recv_cmsgs() can
take decisions accessing the latter field only.
With this patch applied, on an AMD epic server with i40e NICs, I
measured a 10% performance improvement for small packets UDP flood
performance tests - possibly a larger delta could be observed with more
recent H/W.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/dbd18c8a1171549f8249ac5a8b30b1b5ec88a425.1739294057.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
netlink: specs: add a spec for nl80211 wiphy
Add a rudimentary YNL spec for nl80211 that includes get-wiphy and
get-interface, along with some required enhancements to YNL and the
netlink schemas.
Patch 1 is a minor cleanup to prepare for patch 2
Patches 2-4 are new features for YNL
Patches 5-7 are updates to ynl_gen_c
Patches 8-9 are schema updates for feature parity
Patch 10 is the new nl80211 spec
====================
Link: https://patch.msgid.link/20250211120127.84858-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: add support for phylink managed EEE
This series adds support for phylink managed EEE to DSA, and converts
mt753x to make use of this feature.
Patch 1 implements a helper to indicate whether the MAC LPI operations
are populated (suggested by Vladimir)
Patch 2 makes the necessary changes to the core code - we retain calling
set_mac_eee(), but this method now becomes a way to merely validate the
arguments when using phylink managed EEE rather than performing any
configuration.
Patch 3 converts the mt7530 driver to use phylink managed EEE.
====================
Link: https://patch.msgid.link/Z6nWujbjxlkzK_3P@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow DSA drivers to use phylink managed EEE, we need to
change the behaviour of the DSA's .set_eee() ethtool method.
Implementation of the DSA .set_mac_eee() method becomes optional with
phylink managed EEE as it is only used to validate the EEE parameters
supplied from userspace. The rest of the EEE state management should
be left to phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thR9l-003vXC-9F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
eth: fbnic: report software queue stats
Fill in typical software queue stats.
# ./pyynl/cli.py --spec netlink/specs/netdev.yaml --dump qstats-get
[{'ifindex': 2,
'rx-alloc-fail': 0,
'rx-bytes': 398064076,
'rx-csum-complete': 271,
'rx-csum-none': 0,
'rx-packets': 276044,
'tx-bytes': 7223770,
'tx-needs-csum': 28148,
'tx-packets': 28449,
'tx-stop': 0,
'tx-wake': 0}]
Note that we don't collect csum-unnecessary, just the uncommon
cases (and unnecessary is all the rest of the packets). There
is no programatic use for these stats AFAIK, just manual debug.
====================
Link: https://patch.msgid.link/20250211181356.580800-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The queue stats struct is used for Rx and Tx queues. Wrap
the Tx stats in a struct and a union, so that we can reuse
the same space for Rx stats on Rx queues.
This also makes it easy to add an assert to the stat handling
code to catch new stats not being aggregated on shutdown.
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
Use PHYlib for reset randomization and adjustable polling
This patch set tackles a DP83TG720 reset lock issue and improves PHY
polling. Rather than adding a separate polling worker to randomize PHY
resets, I chose to extend the PHYlib framework - which already handles
most of the needed functionality - with adjustable polling. This
approach not only addresses the DP83TG720-specific problem (where
synchronized resets can lock the link) but also lays the groundwork for
optimizing PHY stats polling across all PHY drivers. With generic PHY
stats coming in, we can adjust the polling interval based on hardware
characteristics, such as using longer intervals for PHYs with stable HW
counters or shorter ones for high-speed links prone to counter
overflows.
Patch version changes are tracked in separate patches.
====================
Link: https://patch.msgid.link/20250210082358.200751-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address the limitations of the DP83TG720 PHY, which cannot reliably
detect or report a stable link state. To handle this, the PHY must be
periodically reset when the link is down. However, synchronized reset
intervals between the PHY and its link partner can result in a deadlock,
preventing the link from re-establishing.
This change introduces a randomized polling interval when the link is
down to desynchronize resets between link partners.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250210082358.200751-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc
Patches 1-3 by William reduce the memory consumption for representors to
achieve better scalability.
Patches 4-5 by Akiva expose ICM memory consumption per function.
Patches 6-8 expose helpful information on RSS resources in devlink RX
reporter diagnose.
Patches 9-10 are simple enhancements by Alex Lazar.
====================
Link: https://patch.msgid.link/20250209101716.112774-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In XDP scenarios, fragmented packets can occur if the MTU is larger
than the page size, even when the packet size fits within the linear
part.
If XDP multi-buffer support is disabled, the fragmented part won't be
handled in the TX flow, leading to packet drops.
Since XDP multi-buffer support is always available, this commit removes
the conditional check for enabling it.
This ensures that XDP multi-buffer support is always enabled,
regardless of the `is_xdp_mb` parameter, and guarantees the handling of
fragmented packets in such scenarios.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move rx reporter RQs diagnose from mlx5e_rx_reporter_diagnose() to a
dedicated function. This change is a preparation for the following
series which extends diagnose output for the rx reporter. While at it,
also pass a mlx5e_priv pointer to
mlx5e_rx_reporter_diagnose_common_config() as this is the argument the
latter actually needs.
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICM is a portion of the host's memory assigned to a function by the OS
through requests made by the NIC's firmware.
PF ICM consumption can be accessed directly, while VF/SF ICM consumption
can be accessed through their representors in switchdev mode.
The value is exposed to the user in granularity of 4KB through the vnic
health reporter as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0 icm_consumption: 1032
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename mlx5_esw_query_vport_vhca_id to mlx5_vport_get_vhca_id and move
it to vport file. Also, add function declaration to mlx5_core header
file. This better represents the function's usage and allows for it to
be called from other parts of the mlx5_core driver.
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the mq netdev creates a pfifo_fast qdisc. On a
system with 16 core, the pfifo_fast with 3 bands consumes
16 * 3 * 8 (size of pointer) * 1024 (default tx queue len)
= 393KB. The patch sets the tx qlen to representor default
value, 128 (1<<MLX5E_REP_PARAMS_DEF_LOG_SQ_SIZE), which
consumes 16 * 3 * 8 * 128 = 49KB, saving 344KB for each
representor at ECPF.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By experiments, a single queue representor netdev consumes kernel
memory around 2.8MB, and 1.8MB out of the 2.8MB is due to page
pool for the RXQ. Scaling to a thousand representors consumes 2.8GB,
which becomes a memory pressure issue for embedded devices such as
BlueField-2 16GB / BlueField-3 32GB memory.
Since representor netdevs mostly handles miss traffic, and ideally,
most of the traffic will be offloaded, reduce the default non-uplink
rep netdev's RXQ default depth from 1024 to 256 if mdev is ecpf eswitch
manager. This saves around 1MB of memory per regular RQ,
(1024 - 256) * 2KB, allocated from page pool.
With rxq depth of 256, the netlink page pool tool reports
$./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump page-pool-get
{'id': 277,
'ifindex': 9,
'inflight': 128,
'inflight-mem': 786432,
'napi-id': 775}]
This is due to mtu 1500 + headroom consumes half pages, so 256 rxq
entries consumes around 128 pages (thus create a page pool with
size 128), shown above at inflight.
Note that each netdev has multiple types of RQs, including
Regular RQ, XSK, PTP, Drop, Trap RQ. Since non-uplink representor
only supports regular rq, this patch only changes the regular RQ's
default depth.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the ECPF and representors, reduce the max MPWRQ size from 256KB (18)
to 128KB (17). This prepares the later patch for saving representor
memory.
With Striding RQ, there is a minimum of 4 MPWQEs. So with 128KB of max
MPWRQ size, the minimal memory is 4 * 128KB = 512KB. When creating page
pool, consider 1500 mtu, the minimal page pool size will be 512KB/4KB =
128 pages = 256 rx ring entries (2 entries per page).
Before this patch, setting RX ringsize (ethtool -G rx) to 256 causes
driver to allocate page pool size more than it needs due to max MPWRQ
is 256KB (18). Ex: 4 * 256KB = 1MB, 1MB/4KB = 256 pages, but actually
128 pages is good enough. Reducing the max MPWRQ to 128KB fixes the
limitation.
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-10 (ice, igc, e1000e)
For ice:
Karol, Jake, and Michal add PTP support for E830 devices. Karol
refactors and cleans up PTP code. Jake allows for a common
cross-timestamp implementation to be shared for all devices and
Michal adds E830 support.
Mateusz cleans up initial Flow Director rule creation to loop rather
than duplicate repeated similar calls.
For igc:
Siang adjust calls to remove need for close and open calls on loading
XDP program.
For e1000e:
Gerhard Engleder batches register writes for writing multicast table
on real-time kernels.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Fix real-time violations on link up
igc: Avoid unnecessary link down event in XDP_SETUP_PROG process
ice: refactor ice_fdir_create_dflt_rules() function
ice: Implement PTP support for E830 devices
ice: Refactor ice_ptp_init_tx_*
ice: Add unified ice_capture_crosststamp
ice: Process TSYN IRQ in a separate function
ice: Use FIELD_PREP for timestamp values
ice: Remove unnecessary ice_is_e8xx() functions
ice: Don't check device type when checking GNSS presence
====================
Link: https://patch.msgid.link/20250210192352.3799673-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support variable write-alignment, and background updates. The latter
allows other MCDI to continue while the device is processing an
MC_CMD_NVRAM_UPDATE_FINISH, since this can take a long time owing to
e.g. cryptographic signature verification.
Expose these handlers in mcdi.h, and build them even when
CONFIG_SFC_MTD=n, so they can be used for devlink flash in a
subsequent patch.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/de3d9e14fee69e15d95b46258401a93b75659f78.1739186253.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
