Work mostly focussed on the still new rk3588 Soc with some new boards the
Orange Pi 5 and Orange Pi 5 Plus as well as the QuartzPro64 from Pine64.
It also gained two new peripherals, the SFC (serial-flash-controller)
as well as support for it's AV1 video decoder.
And of course existing rk3588 boards got support added for various
peripherals (PCIe, usb, sardadc, leds, etc).
And in non-rk3588 news, rk3566-based gaming devices seem to be en-vogue,
and the Powkiddy RGB30 also moved in.
* tag 'v6.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
arm64: dts: rockchip: add support for Powkiddy RGB30
dt-bindings: arm64: rockchip: add Powkiddy RGB30
arm64: dts: rockchip: add status LED to rock-5b
arm64: dts: rockchip: add ADC buttons to rk3588-evb1
arm64: dts: rockchip: Add AV1 decoder node to rk3588s
arm64: dts: rockchip: Add missing sdmmc2 SDR rates to rock-3a
arm64: dts: rockchip: Enable UART6 on rock-5b
arm64: dts: rockchip: Remove duplicate regulator vcc3v3_wf from rock-5b
arm64: dts: rockchip: Add QuartzPro64 SBC device tree
dt-bindings: arm: rockchip: Add Pine64 QuarzPro64
arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus
dt-bindings: arm: rockchip: Add Orange Pi 5 Plus
arm64: dts: rockchip: Add UART9 M0 pin definitions to rk3588s
arm64: dts: rockchip: Add I2S2 M0 pin definitions to rk3588s
arm64: dts: rockchip: Add Orange Pi 5
arm64: dts: rockchip: Add sfc node to rk3588s
dt-bindings: arm: rockchip: Add Orange Pi 5 board
arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support
arm64: dts: rockchip: Add sdio node to rock-5b
arm64: dts: rockchip: add PCIe3 bus to rk3588-evb1
...
Link: https://lore.kernel.org/r/1870252.CQOukoFCf9@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.7
StarFive:
Things are a bit slower for StarFive this window, there's only the
addition of audio related DT nodes to speak of here.
Generic:
The SiFive, StarFive and Microchip devicetrees have had my replacement
ISA extension detection properties added. Unfortunately, the old
"riscv,isa" property never defined exactly what the extensions it
contained meant, and people were want to fill it in incorrectly (and
call upstream kernel devs idiots for not doing the same). The new
properties have explicit definitions and hopefully will stand up better
to some of the variation from RVI.
Sophgo:
Two new SoCs, one is probably the first of several with up/down tuned
variants, that have a pair of T-Head c906 cores and appear aimed at the
IP camera, smart <insert whatever> etc markets. They are intended to run
in AMP mode, with an RTOS on the less powerful core. The other is far
more interesting to kernel developers however, the 64-core SG2042, with
more recent c920 cores from T-Head at 2 GHz. For both, support is at a
very basic stage - some of the same developers are working on them as
other T-Head powered SoCs, but hopefully things will move beyond a basic
console boot. The goal is for Chen Wang to take over maintaining the
Sophgo support once they have some more experience with the process.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (22 commits)
riscv: dts: starfive: convert isa detection to new properties
riscv: dts: sifive: convert isa detection to new properties
riscv: dts: microchip: convert isa detection to new properties
riscv: dts: sophgo: add Milk-V Duo board device tree
riscv: dts: sophgo: add initial CV1800B SoC device tree
dt-bindings: riscv: Add Milk-V Duo board compatibles
dt-bindings: timer: Add SOPHGO CV1800B clint
dt-bindings: interrupt-controller: Add SOPHGO CV1800B plic
riscv: defconfig: enable SOPHGO SoC
riscv: dts: sophgo: add Milk-V Pioneer board device tree
riscv: dts: add initial Sophgo SG2042 SoC device tree
dt-bindings: interrupt-controller: Add Sophgo sg2042 CLINT mswi
dt-bindings: timer: Add Sophgo sg2042 CLINT timer
dt-bindings: interrupt-controller: Add Sophgo SG2042 PLIC
dt-bindings: riscv: Add T-HEAD C920 compatibles
dt-bindings: riscv: add sophgo sg2042 bindings
dt-bindings: vendor-prefixes: add milkv/sophgo
riscv: Add SOPHGO SOC family Kconfig support
riscv: dts: starfive: add assigned-clock* to limit frquency
riscv: dts: starfive: Add JH7110 PWM-DAC support
...
Link: https://lore.kernel.org/r/20231016-filing-payroll-7aca51b8f1a3@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Device specific bindings should not allow undefined properties. This is
accomplished in json-schema with 'additionalProperties: false'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Memory controller drivers for v6.7
1. Atmel: Use __counted_by annotation.
2. Tegra: Add Tegra234 clients for RCE and VI.
3. Cleanup:
- Use device_get_match_data() to simplify the code,
- Make "additionalProperties: true" explicit in Devicetree bindings.
* tag 'memory-controller-drv-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: Use device_get_match_data()
memory: tegra: Add Tegra234 clients for RCE and VI
dt-bindings: memory-controllers: Make "additionalProperties: true" explicit
memory: atmel-ebi: Annotate struct atmel_ebi_dev with __counted_by
Link: https://lore.kernel.org/r/20231016074013.28286-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Powkiddy RGB30 panel is a 4 inch 720x720 MIPI-DSI LCD panel. It
appears to be based on the ST7703 LCD controller (this is assumed from
the init sequence similarity between this and other displays). Powkiddy
would not share the part number or name for the display from the bill
of materials and there were no obvious external markings, so name the
panel for the device (Powkiddy RGB30).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-3-macroalpha82@gmail.com
Qualcomm ARM64 DeviceTree updates for v6.7
The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.
With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.
The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.
On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.
The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.
On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.
Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.
The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.
Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.
On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.
On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.
Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.
On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.
Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.
The ref clock is wired up to PCIe PHY on SM8150.
On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.
Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.
On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.
Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.
The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.
Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.
* tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (148 commits)
arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use
arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
arm64: dts: qcom: pm8350c: Add flash led node
arm64: dts: qcom: pm7250b: make SID configurable
arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
arm64: dts: qcom: msm8939: Fix iommu local address range
arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
arm64: dts: qcom: msm8976: Fix ipc bit shifts
arm64: dts: qcom: msm8976: Split lpass region
arm64: dts: qcom: pm8150l: Add wled node
arm64: dts: qcom: sa8775p: enable the inline crypto engine
arm64: dts: qcom: msm8916/39: Fix venus memory size
arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards
arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations
arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
arm64: dts: qcom: msm8916: Reserve MBA memory dynamically
arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
...
Link: https://lore.kernel.org/r/20231015191107.854658-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C64 area separately as
that is on separate I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties as needed, and then add any missing properties
flagged by the addition.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926164500.101593-1-robh@kernel.org
