This patch reworks RX support over DMA to improve reliability:
- change dma buffer cyclic configuration by using 2 periods. DMA buffer
data are handled by a flip-flop between the 2 periods in order to avoid
risk of data loss/corruption
- change the size of dma buffer to 4096 to limit overruns
- add rx errors management (breaks, parity, framing and overrun).
When an error occurs on the uart line, the dma request line is masked at
HW level. The SW must 1st clear DMAR (dma request line enable), to
handle the error, then re-enable DMAR to recover. So, any correct data
is taken from the DMA buffer, before handling the error itself. Then
errors are handled from RDR/ISR/FIFO (e.g. in PIO mode). Last, DMA
reception is resumed.
- add a condition on DMA request line in DMA RX routines in order to
switch to PIO mode when no DMA request line is disabled, even if the DMA
channel is still enabled.
When the UART is wakeup source and is configured to use DMA for RX, any
incoming data that wakes up the system isn't correctly received.
At data reception, the irq_handler handles the WUF irq, and then the
data reception over DMA.
As the DMA transfer has been terminated at suspend, and will be restored
by resume callback (which has no yet been called by system), the data
can't be received.
The wake-up data has to be handled in PIO mode while suspend callback
has not been called.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20211020150332.10214-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Re-introduce an irq flag condition in usart_receive_chars.
This condition has been deleted by commit 75f4e830fa ("serial: do not
restore interrupt state in sysrq helper").
This code was present to handle threaded case, and has been removed
because it is no more needed in this case. Nevertheless an irq safe lock
is still needed in some cases, when DMA should be stopped to receive errors
or breaks in PIO mode.
This patch is a precursor to the complete rework or stm32 serial driver
DMA implementation.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20211020150332.10214-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As well known, hvc backend can register its opertions to hvc backend.
the operations contain put_chars(), get_chars() and so on.
Some hvc backend may do dma in its operations. eg, put_chars() of
virtio-console. But in the code of hvc framework, it may pass DMA
incapable memory to put_chars() under a specific configuration, which
is explained in commit c4baad5029(virtio-console: avoid DMA from stack):
1, c[] is on stack,
hvc_console_print():
char c[N_OUTBUF] __ALIGNED__;
cons_ops[index]->put_chars(vtermnos[index], c, i);
2, ch is on stack,
static void hvc_poll_put_char(,,char ch)
{
struct tty_struct *tty = driver->ttys[0];
struct hvc_struct *hp = tty->driver_data;
int n;
do {
n = hp->ops->put_chars(hp->vtermno, &ch, 1);
} while (n <= 0);
}
Commit c4baad5029 is just the fix to avoid DMA from stack memory, which
is passed to virtio-console by hvc framework in above code. But I think
the fix is aggressive, it directly uses kmemdup() to alloc new buffer
from kmalloc area and do memcpy no matter the memory is in kmalloc area
or not. But most importantly, it should better be fixed in the hvc
framework, by changing it to never pass stack memory to the put_chars()
function in the first place. Otherwise, we still face the same issue if
a new hvc backend using dma added in the furture.
In this patch, add 'char cons_outbuf[]' as part of 'struct hvc_struct',
so hp->cons_outbuf is no longer the stack memory, we can use it in above
cases safely. We also add lock to protect cons_outbuf instead of using
the global lock of hvc.
Introduce another array(cons_hvcs[]) for hvc pointers next to the
cons_ops[] and vtermnos[] arrays. With the array, we can easily find
hvc's cons_outbuf and its lock.
With the patch, we can revert the fix c4baad5029.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211015024658.1353987-3-xianting.tian@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During console setup imx_uart_console_setup() enables clocks, but they
are never disabled when the console is unregistered, this leads to
clk_prepare_enable() being called multiple times without a matching
clk_disable_unprepare() in case of console unregister.
Ensure that clock enable/disable are balanced adding
clk_disable_unprepare() in the console exit callback.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20211020192643.476895-3-francesco.dolcini@toradex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Workqueue: events_unbound flush_to_ldisc
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull libata fixes from Damien Le Moal:
"Two fixes for this cycle:
- Fix a null pointer dereference in ahci-platform driver (from Hai)
- Fix uninitialized variables in pata_legacy driver (from Dan)"
* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
pata_legacy: fix a couple uninitialized variable bugs
Pull block fixes from Jens Axboe:
"Bigger than usual for this point in time, the majority is fixing some
issues around BDI lifetimes with the move from the request_queue to
the disk in this release. In detail:
- Series on draining fs IO for del_gendisk() (Christoph)
- NVMe pull request via Christoph:
- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)
- brd locking scope fix (Tetsuo)
- BFQ fix (Paolo)"
* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
block, bfq: reset last_bfqq_created on group change
block: warn when putting the final reference on a registered disk
brd: reduce the brd_devices_mutex scope
kyber: avoid q->disk dereferences in trace points
block: keep q_usage_counter in atomic mode after del_gendisk
block: drain file system I/O on del_gendisk
block: split bio_queue_enter from blk_queue_enter
block: factor out a blk_try_enter_queue helper
block: call submit_bio_checks under q_usage_counter
nvme: fix per-namespace chardev deletion
block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
nvme-pci: Fix abort command id
Pull io_uring fix from Jens Axboe:
"Just a single fix for a wrong condition for grabbing a lock, a
regression in this merge window"
* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
io_uring: fix wrong condition to grab uring lock
Pull virtio fixes from Michael Tsirkin:
"Fixes up some issues in rc5"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: Fix the wrong input in config_cb
VDUSE: fix documentation underline warning
Revert "virtio-blk: Add validation for block size in config space"
vhost_vdpa: unset vq irq before freeing irq
virtio: write back F_VERSION_1 before validate
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
Pull objtool fixes from Borislav Petkov:
- Update section headers before the respective relocations to not
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Update section header before relocations
objtool: Check for gelf_update_rel[a] failures
Pull EDAC fix from Borislav Petkov:
- Log the "correct" uncorrectable error count in the armada_xp driver
* tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/armada-xp: Fix output of uncorrectable error counter
Pull perf fix from Borislav Petkov:
- Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR
* tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/msr: Add Sapphire Rapids CPU support
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
Pull x86 fixes from Borislav Petkov:
- Do not enable AMD memory encryption in Kconfig by default due to
shortcomings of some platforms, leading to boot failures.
- Mask out invalid bits in the MXCSR for 32-bit kernels again because
Thomas and I don't know how to mask out bits properly. Third time's
the charm.
* tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Mask out the invalid MXCSR bits properly
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.15-rc6 for reported
issues that include:
- habanalabs driver fixes
- mei driver fixes and new ids
- fpga new device ids
- MAINTAINER file updates for fpga subsystem
- spi module id table additions and fixes
- fastrpc locking fixes
- nvmem driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
eeprom: 93xx46: fix MODULE_DEVICE_TABLE
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
mei: hbm: drop hbm responses on early shutdown
mei: me: add Ice Lake-N device id.
eeprom: 93xx46: Add SPI device ID table
eeprom: at25: Add SPI ID table
misc: HI6421V600_IRQ should depend on HAS_IOMEM
misc: fastrpc: Add missing lock before accessing find_vma()
cb710: avoid NULL pointer subtraction
misc: gehc: Add SPI ID table
MAINTAINERS: Drop outdated FPGA Manager website
MAINTAINERS: Add Hao and Yilun as maintainers
habanalabs: fix resetting args in wait for CS IOCTL
fpga: ice40-spi: Add SPI device ID table
Pull staging and IIO driver fixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 5.15-rc6.
They include:
- vc04_services bugfix for reported problem
- r8188eu array underflow fix
- iio driver fixes for a lot of tiny reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask()
staging: vc04_services: shut up out-of-range warning
iio: light: opt3001: Fixed timeout error when 0 lux
iio: adis16480: fix devices that do not support sleep mode
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
iio: adis16475: fix deadlock on frequency set
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: adc: ad7793: Fix IRQ flag
iio: adc: ad7780: Fix IRQ flag
iio: adc: ad7192: Add IRQ flag
iio: adc: aspeed: set driver data when adc probe.
iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume()
iio: adc: max1027: Fix the number of max1X31 channels
iio: adc: max1027: Fix wrong shift with 12-bit devices
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: adc: rzg2l_adc: Fix -EBUSY timeout error return
iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
iio: dac: ti-dac5571: fix an error code in probe()
Pull serial driver fix from Greg KH:
"Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
regression that showed up in 5.15-rc1. It has been in linux-next for a
while with no reported issues"
* tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: allow disabling of Freescale 16550 compile test
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve a number of tiny issues.
They include:
- new USB serial driver ids
- xhci driver fixes for a bunch of issues
- musb error path fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: musb: dsps: Fix the probe error path
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
xhci: Fix command ring pointer corruption while aborting a command
USB: xhci: dbc: fix tty registration race
xhci: add quirk for host controllers that don't update endpoint DCS
xhci: guard accesses to ep_state in xhci_endpoint_reset()
USB: serial: qcserial: add EM9191 QDL support
USB: serial: option: add Quectel EC200S-CN module support
USB: serial: option: add prod. id for Quectel EG91
USB: serial: option: add Telit LE910Cx composition 0x1204
Pull input fixes from Dmitry Torokhov:
- a new product ID for the xpad joystick driver
- fixes to resistive-adc-touch and snvs_pwrkey drivers
- a change to touchscreen helpers to make clang happier
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: touchscreen - avoid bitwise vs logical OR warning
Input: xpad - add support for another USB ID of Nacon GC-100
Input: resistive-adc-touch - fix division by zero error on z1 == 0
Input: snvs_pwrkey - add clk handling
Since commit 430a67f9d6 ("block, bfq: merge bursts of newly-created
queues"), BFQ maintains a per-group pointer to the last bfq_queue
created. If such a queue, say bfqq, happens to move to a different
group, then bfqq is no more a valid last bfq_queue created for its
previous group. That pointer must then be cleared. Not resetting such
a pointer may also cause UAF, if bfqq happens to also be freed after
being moved to a different group. This commit performs this missing
reset. As such it fixes commit 430a67f9d6 ("block, bfq: merge bursts
of newly-created queues").
Such a missing reset is most likely the cause of the crash reported in [1].
With some analysis, we found that this crash was due to the
above UAF. And such UAF did go away with this commit applied [1].
Anyway, before this commit, that crash happened to be triggered in
conjunction with commit 2d52c58b9c ("block, bfq: honor already-setup
queue merges"). The latter was then reverted by commit ebc69e897e
("Revert "block, bfq: honor already-setup queue merges""). Yet commit
2d52c58b9c ("block, bfq: honor already-setup queue merges") contains
no error related with the above UAF, and can then be restored.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 430a67f9d6 ("block, bfq: merge bursts of newly-created queues")
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test evsel' build error on !x86 architectures
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes
- Output offsets for decompressed records, not just useless zeros
* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libperf tests: Fix test_stat_cpu
libperf test evsel: Fix build error on !x86 architectures
perf report: Output non-zero offset for decompressed records
Pull memblock fix from Mike Rapoport:
"Fix handling of NOMAP regions with kmemleak.
NOMAP regions don't have linear map entries so an attempt to scan
these areas in kmemleak would fault.
Prevent such faults by excluding NOMAP regions from kmemleak"
* tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: exclude NOMAP regions from kmemleak
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
Pull clk driver fixes from Stephen Boyd:
"Clk driver fixes for critical issues found in the past few weeks:
- Select gdsc config so qcom sm6350 driver probes
- Fix a register offset in qcom gcc-sm6115 so the correct clk is
controlled
- Fix inverted logic in Renesas RZ/G2L .is_enabled()
- Mark some more clks critical in Renesas clk driver
- Remove a duplicate clk in the agilex driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: add select QCOM_GDSC for SM6350
clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc
clk: socfpga: agilex: fix duplicate s2f_user0_clk
clk: renesas: rzg2l: Fix clk status function
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target to skip redundant processing on I/O errors.
- Fix request-based DM so that it doesn't queue request to blk-mq when
DM device is suspended.
- Fix DM core mempool NULL pointer race when completing IO.
- Make DM clone target's 'descs' array static.
* tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix mempool NULL pointer race when completing IO
dm rq: don't queue request to blk-mq during DM suspend
dm clone: make array 'descs' static
dm verity: skip redundant verity_handle_err() on I/O errors
Pull s390 fixes from Vasily Gorbik:
- Maintainers and reviewers changes:
* Cornelia decided to free up her time and step down from vfio-ccw
maintainer and s390 kvm reviewer duties
* Add Alexander Gordeev as s390 arch code reviewer
- Fix broken strrchr implementation
* tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add Alexander Gordeev as reviewer
s390: fix strrchr() implementation
vfio-ccw: step down as maintainer
KVM: s390: remove myself as reviewer
Pull csky fixes from Guo Ren:
"Only 5 fixups:
- Make HAVE_TCM depend on !COMPILE_TEST
- bitops: Remove duplicate __clear_bit define
- Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
- Fixup regs.sr broken in ptrace
- don't let sigreturn play with priveleged bits of status register"
* tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux:
csky: Make HAVE_TCM depend on !COMPILE_TEST
csky: bitops: Remove duplicate __clear_bit define
csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
csky: Fixup regs.sr broken in ptrace
csky: don't let sigreturn play with priveleged bits of status register
Pull ARC fix from Vineet Gupta:
"Small fixlet for ARC"
* tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix potential build snafu
Pull ARM SoC fixes from Arnd Bergmann:
"A small number fixes this time, mostly touching actual code:
- Add platform device for i.MX System Reset Controller (SRC) to
fix a regression caused by fw_devlink change
- A fixup for a boot regression caused by my own rework for the
Qualcomm SCM driver
- Multiple bugfixes for the Arm FFA and optee firmware drivers,
addressing problems when they are built as a loadable module
- Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
addressing VEC (video encoder), MDIO bus controller
#address-cells/#size-cells, SDIO voltage and PCIe host bridge
dtc warnings"
* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx: register reset controller from a platform driver
iommu/arm: fix ARM_SMMU_QCOM compilation
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
tee: optee: Fix missing devices unregister during optee_remove
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm283x: Fix VEC address for BCM2711
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Pull pci fix from Bjorn Helgaas:
- Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so
we don't dereference the error code as a pointer (Wang Hai)
* tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: Handle msi_populate_sysfs() errors correctly
Pull ACPI fix from Rafael Wysocki:
"Add a missing device ID to a quirk list in the suspend-to-idle support
code"
* tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Include alternate AMDI0005 id in special behaviour
A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:
drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.
To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)
This completes the fix in commit 135be16d35 ("ARM: dts: imx7s: add
snvs clock to pwrkey").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
q->disk becomes invalid after the gendisk is removed. Work around this
by caching the dev_t for the tracepoints. The real fix would be to
properly tear down the I/O schedulers with the gendisk, but that is
a much more invasive change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
