cmd_vdso_check checks if there are any dynamic relocations in
vdso64.so.dbg. When kernel is compiled with
-mno-pic-data-is-text-relative, R_390_RELATIVE relocs are generated and
this results in kernel build error.
kpatch uses -mno-pic-data-is-text-relative option when building the
kernel to prevent relative addressing between code and data. The flag
avoids relocation error when klp text and data are too far apart
kpatch does not patch vdso code and hence the
mno-pic-data-is-text-relative flag is not essential.
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The .align directive has inconsistent behavior across architectures. Use
.balign instead everywhere. This is a no-op for s390, but with this there
is no mix in using .align and .balign anymore.
Future code is supposed to use only .balign.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Nathan Chancellor reported a kernel build error on Fedora 39:
$ clang --version | head -1
clang version 16.0.5 (Fedora 16.0.5-1.fc39)
$ s390x-linux-gnu-ld --version | head -1
GNU ld version 2.40-1.fc39
$ make -skj"$(nproc)" ARCH=s390 CC=clang CROSS_COMPILE=s390x-linux-gnu- olddefconfig all
s390x-linux-gnu-ld: arch/s390/boot/startup.o(.text+0x5b4): misaligned symbol `_decompressor_end' (0x35b0f) for relocation R_390_PC32DBL
make[3]: *** [.../arch/s390/boot/Makefile:78: arch/s390/boot/vmlinux] Error 1
It turned out that the problem with misaligned symbols on s390 was fixed
with commit 80ddf5ce1c ("s390: always build relocatable kernel") for the
kernel image, but did not take into account that the decompressor uses its
own set of CFLAGS, which come without -fPIE.
Add the -fPIE flag also to the decompresser CFLAGS to fix this.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: CKI <cki-project@redhat.com>
Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1747
Link: https://lore.kernel.org/32935.123062114500601371@us-mta-9.us.mimecast.lan/
Link: https://lore.kernel.org/r/20230622125508.1068457-1-hca@linux.ibm.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
zcrypt_unlocked_ioctl() allocates 256k with kzalloc() which is likely to
fail if memory is fragmented. To avoid that use kvmalloc_array() instead,
like it is done at several other places for the same reason.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When adding an undefined symbol the build still succeeds, but
userspace is crashing trying to execute vdso because the
undefined symbol is not resolved. Add the check for undefined
symbols to prevent this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
meaning. However, unlike ident_map_size it is not
adjusted against various limiting factors (see the
comment to setup_ident_map_size() function). That
renders all checks against VMEM_MAX_PHYS invalid.
Further, VMEM_MAX_PHYS is currently set to vmemmap,
which is an address in virtual memory space. However,
it gets compared against physical addresses in various
locations. That works, because both address spaces
are the same on s390, but otherwise it is wrong.
Instead of fixing VMEM_MAX_PHYS misuse and semantics
just remove it.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull s390 updates from Alexander Gordeev:
- Fix the style of protected key API driver source: use x-mas tree for
all local variable declarations
- Rework protected key API driver to not use the struct pkey_protkey
and pkey_clrkey anymore. Both structures have a fixed size buffer,
but with the support of ECC protected key these buffers are not big
enough. Use dynamic buffers internally and transparently for
userspace
- Add support for a new 'non CCA clear key token' with ECC clear keys
supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448.
This makes it possible to derive a protected key from the ECC clear
key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way
to derive is via PCKMO instruction
- The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t
for reference counting. Replace this with the proper data type
refcount_t
- Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since
gcc generates inefficient code, which may lead to stack overflows
- Replace one-element array with flexible-array member in struct
vfio_ccw_parent and refactor the rest of the code accordingly. Also,
prefer struct_size() over sizeof() open- coded versions
- Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and
OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the
system memory should be cleared or not once dumped
- Fix a hang when a user attempts to remove a VFIO-AP mediated device
attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and
VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback
to request a release of the device
- Fix calculation for R_390_GOTENT relocations for modules
- Allow any user space process with CAP_PERFMON capability read and
display the CPU Measurement facility counter sets
- Rework large statically-defined per-CPU cpu_cf_events data structure
and replace it with dynamically allocated structures created when a
perf_event_open() system call is invoked or /dev/hwctr device is
accessed
* tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events
s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process
s390/module: fix rela calculation for R_390_GOTENT
s390/vfio-ap: wire in the vfio_device_ops request callback
s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl
s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl
s390/pkey: add support for ecc clear key
s390/pkey: do not use struct pkey_protkey
s390/pkey: introduce reverse x-mas trees
s390/zcore: conditionally clear memory on reipl
s390/ipl: add REIPL_CLEAR flag to os_info
vfio/ccw: use struct_size() helper
vfio/ccw: replace one-element array with flexible-array member
s390: select ARCH_SUPPORTS_INT128
s390/pai_ext: replace atomic_t with refcount_t
s390/pai_crypto: replace atomic_t with refcount_t
Pull xtensa updates from Max Filippov:
- clean up platform_* interface of the xtensa architecture
- enable HAVE_ASM_MODVERSIONS
- drop ARCH_WANT_FRAME_POINTERS
- clean up unaligned access exception handler
- provide handler for load/store exceptions
- various small fixes and cleanups
* tag 'xtensa-20230627' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: dump userspace code around the exception PC
xtensa: rearrange show_stack output
xtensa: add load/store exception handler
xtensa: rearrange unaligned exception handler
xtensa: always install slow handler for unaligned access exception
xtensa: move early_trap_init from kasan_early_init to init_arch
xtensa: drop ARCH_WANT_FRAME_POINTERS
xtensa: report trax and perf counters in cpuinfo
xtensa: add asm-prototypes.h
xtensa: only build __strncpy_user with CONFIG_ARCH_HAS_STRNCPY_FROM_USER
xtensa: drop bcopy implementation
xtensa: drop EXPORT_SYMBOL for common_exception_return
xtensa: boot-redboot: clean up Makefile
xtensa: clean up default platform functions
xtensa: drop platform_halt and platform_power_off
xtensa: drop platform_restart
xtensa: drop platform_heartbeat
xtensa: xt2000: drop empty platform_init
This reverts commit 6ebe94baa2.
The patch "nios2: Convert __pte_free_tlb() to use ptdescs" was supposed
to go together with a patchset that Vishal Moola had planned taking it
through the mm tree. By just having this patch, all NIOS2 builds are
broken.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
Pull x86 mm updates from Ingo Molnar:
- Remove Xen-PV leftovers from init_32.c
- Fix __swp_entry_to_pte() warning splat for Xen PV guests, triggered
on CONFIG_DEBUG_VM_PGTABLE=y
* tag 'x86-mm-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove Xen-PV leftovers from init_32.c
x86/mm: Fix __swp_entry_to_pte() for Xen PV guests
Pull perf events updates from Ingo Molnar:
- Rework & fix the event forwarding logic by extending the core
interface.
This fixes AMD PMU events that have to be forwarded from the
core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Re-instate the linear PMU search
perf/x86/intel: Define bit macros for FixCntrCtl MSR
perf test: Add selftest to test IBS invocation via core pmu events
perf/core: Remove pmu linear searching code
perf/ibs: Fix interface via core pmu events
perf/core: Rework forwarding of {task|cpu}-clock events
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
Pull SGX update from Borislav Petkov:
- A fix to avoid using a list iterator variable after the loop it is
used in
* tag 'x86_sgx_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Avoid using iterator after loop in sgx_mmu_notifier_release()
Pull x86 SEV updates from Borislav Petkov:
- Some SEV and CC platform helpers cleanup and simplifications now that
the usage patterns are becoming apparent
[ I'm sure I'm the only one that has gets confused by all the TLAs, but
in case there are others: here SEV is AMD's "Secure Encrypted
Virtualization" and CC is generic "Confidential Computing".
There's also Intel SGX (Software Guard Extensions) and TDX (Trust
Domain Extensions), along with all the vendor memory encryption
extensions (SME, TSME, TME, and WTF).
And then we have arm64 with RMA and CCA, and I probably forgot another
dozen or so related acronyms - Linus ]
* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Get rid of accessor functions
x86/sev: Get rid of special sev_es_enable_key
x86/coco: Mark cc_platform_has() and descendants noinstr
Pull x86 mtrr updates from Borislav Petkov:
"A serious scrubbing of the MTRR code including adding a new map
mechanism in order to look up the memory type of a region easily.
Also address memory range lookup issues like returning an invalid
memory type. Furthermore, this handles the decoupling of PAT from MTRR
more naturally.
All work by Juergen Gross"
* tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Set default memory type for PV guests to WB
x86/mtrr: Unify debugging printing
x86/mtrr: Remove unused code
x86/mm: Only check uniform after calling mtrr_type_lookup()
x86/mtrr: Don't let mtrr_type_lookup() return MTRR_TYPE_INVALID
x86/mtrr: Use new cache_map in mtrr_type_lookup()
x86/mtrr: Add mtrr=debug command line option
x86/mtrr: Construct a memory map with cache modes
x86/mtrr: Add get_effective_type() service function
x86/mtrr: Allocate mtrr_value array dynamically
x86/mtrr: Move 32-bit code from mtrr.c to legacy.c
x86/mtrr: Have only one set_mtrr() variant
x86/mtrr: Replace vendor tests in MTRR code
x86/xen: Set MTRR state when running as Xen PV initial domain
x86/hyperv: Set MTRR state when running as SEV-SNP Hyper-V guest
x86/mtrr: Support setting MTRR state for software defined MTRRs
x86/mtrr: Replace size_or_mask and size_and_mask with a much easier concept
x86/mtrr: Remove physical address size calculation
Pull misc x86 updates from Borislav Petkov:
- Remove the local symbols prefix of the get/put_user() exception
handling symbols so that tools do not get confused by the presence of
code belonging to the wrong symbol/not belonging to any symbol
- Improve csum_partial()'s performance
- Some improvements to the kcpuid tool
* tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Make get/put_user() exception handling a visible symbol
x86/csum: Fix clang -Wuninitialized in csum_partial()
x86/csum: Improve performance of `csum_partial`
tools/x86/kcpuid: Add .gitignore
tools/x86/kcpuid: Dump the correct CPUID function in error
Pull x86 microcode loader updates from Borislav Petkov:
- Load late on both SMT threads on AMD, just like it is being done in
the early loading procedure
- Cleanups
* tag 'x86_microcode_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load late on both threads too
x86/microcode/amd: Remove unneeded pointer arithmetic
x86/microcode/AMD: Get rid of __find_equiv_id()
Pull arm documentation move from Jonathan Corbet:
"Move the Arm architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm-move' of git://git.lwn.net/linux:
dt-bindings: Update Documentation/arm references
docs: update some straggling Documentation/arm references
crypto: update some Arm documentation references
mips: update a reference to a moved Arm Document
arm64: Update Documentation/arm references
arm: update in-source documentation references
arm: docs: Move Arm documentation to Documentation/arch/
Pull documentation updates from Jonathan Corbet:
"It's been a relatively calm cycle in docsland. We do have:
- Some initial page-table documentation from Linus (the other Linus)
- Regression-handling documentation improvements from Thorsten
- Addition of kerneldoc documentation for the ERR_PTR() and related
macros from James Seo
... and the usual collection of fixes and updates"
* tag 'docs-6.5' of git://git.lwn.net/linux:
docs: consolidate storage interfaces
Documentation: update git configuration for Link: tag
Documentation: KVM: make corrections to vcpu-requests.rst
Documentation: KVM: make corrections to ppc-pv.rst
Documentation: KVM: make corrections to locking.rst
Documentation: KVM: make corrections to halt-polling.rst
Documentation: virt: correct location of haltpoll module params
Documentation/mm: Initial page table documentation
docs: crypto: async-tx-api: fix typo in struct name
docs/doc-guide: Clarify how to write tables
docs: handling-regressions: rework section about fixing procedures
docs: process: fix a typoed cross-reference
docs: submitting-patches: Discuss interleaved replies
MAINTAINERS: direct process doc changes to a dedicated ML
Documentation: core-api: Add error pointer functions to kernel-api
err.h: Add missing kerneldocs for error pointer functions
Documentation: conf.py: Add __force to c_id_attributes
docs: clarify KVM related kernel parameters' descriptions
docs: consolidate human interface subsystems
docs: admin-guide: Add information about intel_pstate active mode
Pull kselftest updates from Shuah Khan:
- allow runners to override the timeout
This change is made to avoid future increases of long timeouts
- several other spelling and cleanups
- a new subtest to video_device_test
- enhancements to test coverage in clone3 test
- other fixes to ftrace and cpufreq tests
* tag 'linux-kselftest-next-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftace: Fix KTAP output ordering
selftests/cpufreq: Don't enable generic lock debugging options
kselftests: Sort the collections list to avoid duplicate tests
selftest: pidfd: Omit long and repeating outputs
selftests: allow runners to override the timeout
selftests/ftrace: Add new test case which checks for optimized probes
selftests/clone3: test clone3 with exit signal in flags
kselftest: vDSO: Fix accumulation of uninitialized ret when CLOCK_REALTIME is undefined
selftests: prctl: Fix spelling mistake "anonynous" -> "anonymous"
selftests: media_tests: Add new subtest to video_device_test
Pull KUnit updates from Shuah Khan:
- kunit_add_action() API to defer a call until test exit
- Update document to add kunit_add_action() usage notes
- Changes to always run cleanup from a test kthread
- Documentation updates to clarify cleanup usage (assertions should not
be used in cleanup)
- Documentation update to clearly indicate that exit functions should
run even if init fails
- Several fixes and enhancements to existing tests
* tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Add source tree entry for kunit
Documentation: kunit: Rename references to kunit_abort()
kunit: Move kunit_abort() call out of kunit_do_failed_assertion()
kunit: Fix obsolete name in documentation headers (func->action)
Documentation: Kunit: add MODULE_LICENSE to sample code
kunit: Update kunit_print_ok_not_ok function
kunit: Fix reporting of the skipped parameterized tests
kunit/test: Add example test showing parameterized testing
Documentation: kunit: Add usage notes for kunit_add_action()
kunit: kmalloc_array: Use kunit_add_action()
kunit: executor_test: Use kunit_add_action()
kunit: Add kunit_add_action() to defer a call until test exit
kunit: example: Provide example exit functions
Documentation: kunit: Warn that exit functions run even if init fails
Documentation: kunit: Note that assertions should not be used in cleanup
kunit: Always run cleanup from a test kthread
Documentation: kunit: Modular tests should not depend on KUNIT=y
kunit: tool: undo type subscripts for subprocess.Popen
Pull nolibc updates from Paul McKenney:
- Add stackprotector support
- Fix RISC-V load-store instruction syntax to support 32-bit binaries,
plus fixes for generic 32-bit support
- Fix use of s390 sys_fork()
- Add my_syscall6() for ARM
- Support different platforms having different errno definitions
- Fix ppoll/ppoll_time64 arguments (add the fifth argument)
- Force use of little endian on MIPS
- Improved testing, for example, better handling of different compilers
and compiler versions, comparing nolibc behavior to that of libc, and
additional test cases
- Improve syntax and header ordering
- Use existing <linux/reboot.h> instead of redefining constants
- Add syscall()
* tag 'nolibc.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (53 commits)
selftests/nolibc: make sure gcc always use little endian on MIPS
selftests/nolibc: also count skipped and failed tests in output
selftests/nolibc: add new gettimeofday test cases
selftests/nolibc: remove gettimeofday_bad1/2 completely
selftests/nolibc: support two errnos with EXPECT_SYSER2()
tools/nolibc: open: fix up compile warning for arm
tools/nolibc: arm: add missing my_syscall6
selftests/nolibc: use INT_MAX instead of __INT_MAX__
selftests/nolibc: not include limits.h for nolibc
selftests/nolibc: fix up compile warning with glibc on x86_64
selftests/nolibc: allow specify extra arguments for qemu
selftests/nolibc: remove test gettimeofday_null
tools/nolibc: ensure fast64 integer types have 64 bits
selftests/nolibc: test_fork: fix up duplicated print
tools/nolibc: ppoll/ppoll_time64: add a missing argument
selftests/nolibc: remove the duplicated gettimeofday_bad2
selftests/nolibc: print name instead of number for EOVERFLOW
tools/nolibc: support nanoseconds in stat()
selftests/nolibc: prevent coredumps during test execution
tools/nolibc: add support for prctl()
...
Pull RCU updates from Paul McKenney:
"Documentation updates
Miscellaneous fixes, perhaps most notably:
- Remove RCU_NONIDLE(). The new visibility of most of the idle loop
to RCU has obsoleted this API.
- Make the RCU_SOFTIRQ callback-invocation time limit also apply to
the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
- Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only invoked
once per 32 callbacks due to its high overhead.)
- Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which
fixes a bug that can occur on systems with non-contiguous CPU
numbering.
kvfree_rcu updates:
- Eliminate the single-argument variant of k[v]free_rcu() now that
all uses have been converted to k[v]free_rcu_mightsleep().
- Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too
soon. Yes, this is closing the barn door after the horse has
escaped, but Murphy says that there will be more horses.
Callback-offloading updates:
- Fix a number of bugs involving the shrinker and lazy callbacks.
Tasks RCU updates
Torture-test updates"
* tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
torture: Remove duplicated argument -enable-kvm for ppc64
doc/rcutorture: Add description of rcutorture.stall_cpu_block
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
rcutorture: Correct name of use_softirq module parameter
locktorture: Add long_hold to adjust lock-hold delays
rcu/nocb: Make shrinker iterate only over NOCB CPUs
rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs
rcu: Make rcu_cpu_starting() rely on interrupts being disabled
rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work
rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp
rcu: Employ jiffies-based backstop to callback time limit
rcu: Check callback-invocation time limit for rcuc kthreads
rcu: Remove RCU_NONIDLE()
rcu: Add more RCU files to kernel-api.rst
rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output
rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker
rcu/nocb: Fix shrinker race against callback enqueuer
rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading
...
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Support Pin Assignment D in getting mux state
- Emit an uevent when EC panics so that userland programs get chance
to capture EC coredumps (LPC interface only)
- Send EC_CMD_HOST_SLEEP_EVENT to EC at the very beginning/end of
system suspend/resume so that EC can watch the duration more
accurately (LPC interface only)
Misc:
- Switch back from I2C .probe_new() to .probe()
- Use %*ph for printing hexdump of small buffers"
* tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small buffer
platform/chrome: Switch i2c drivers back to use .probe()
platform/chrome: cros_ec_lpc: Move host command to prepare/complete
platform/chrome: cros_ec: Report EC panic as uevent
platform/chrome: cros_typec_switch: Add Pin D support
Pull thermal control updates from Rafael Wysocki:
"These extend the int340x thermal driver, add thermal DT bindings for
some Qcom platforms, add DT bindings and support for Armada AP807 and
MSM8909, allow selecting the bang-bang thermal governor as the default
one, address issues in several thermal drivers for ARM platforms and
clean up code.
Specifics:
- Add new IOCTLs to the int340x thermal driver to allow user space to
retrieve the Passive v2 thermal table (Srinivas Pandruvada)
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
(Konrad Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Clean up and fix the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only
described sensors and add the version 2.1 on the Qoriq sensor (Peng
Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)"
* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/stm32: Convert to platform remove callback returning void
net/mlx5: Update the driver with the recent thermal changes
thermal/drivers/armada: Add support for AP807 thermal data
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/qoriq: Support version 2.1
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: No need to program site adjustment register
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
...
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of notifications in ACPI button drivers (to
enable future simplifications and cleanups), clean up the ACPI thermal
driver, update the ACPI backlight driver, add quirks working around
AML bugs on some systems, fix some assorted issues and clean up code.
Specifics:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki)
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello)
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann)
- Drop several ACPI resource management quirks related to IRQ
ovverides on AMD "Zen" systems (Mario Limonciello)
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella)
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
vendor backlight control on relatively recent systems (Hans de
Goede)
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede)
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann)
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki)
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki)
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang)
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin)
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"
* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
ACPI: APEI: mark bert_disable as __initdata
ACPI: EC: Clear GPE on interrupt handling only
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: resource: Remove "Zen" specific match and quirks
...
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
Pull m68k updates from Geert Uytterhoeven:
- miscellaneous NuBus fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.4-rc1
nubus: Don't list slot resources by default
nubus: Remove proc entries before adding them
nubus: Partially revert proc_create_single_data() conversion
Pull x86 cleanups from Dave Hansen:
"As usual, these are all over the map. The biggest cluster is work from
Arnd to eliminate -Wmissing-prototype warnings:
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()"
* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
Documentation: virt: Clean up paravirt_ops doc
x86/mm: Remove unused current_untag_mask()
x86/mm: Remove repeated word in comments
x86/lib/msr: Clean up kernel-doc notation
x86/platform: Avoid missing-prototype warnings for OLPC
x86/mm: Add early_memremap_pgprot_adjust() prototype
x86/usercopy: Include arch_wb_cache_pmem() declaration
x86/vdso: Include vdso/processor.h
x86/mce: Add copy_mc_fragile_handle_tail() prototype
x86/fbdev: Include asm/fb.h as needed
x86/hibernate: Declare global functions in suspend.h
x86/entry: Add do_SYSENTER_32() prototype
x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
x86/mm: Include asm/numa.h for set_highmem_pages_init()
x86: Avoid missing-prototype warnings for doublefault code
x86/fpu: Include asm/fpu/regset.h
x86: Add dummy prototype for mk_early_pgtbl_32()
x86/pci: Mark local functions as 'static'
x86/ftrace: Move prepare_ftrace_return prototype to header
...
Pull x86 tdx updates from Dave Hansen:
- Fix a race window where load_unaligned_zeropad() could cause a fatal
shutdown during TDX private<=>shared conversion
The race has never been observed in practice but might allow
load_unaligned_zeropad() to catch a TDX page in the middle of its
conversion process which would lead to a fatal and unrecoverable
guest shutdown.
- Annotate sites where VM "exit reasons" are reused as hypercall
numbers.
* tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix enc_status_change_finish_noop()
x86/tdx: Fix race between set_memory_encrypted() and load_unaligned_zeropad()
x86/mm: Allow guest.enc_status_change_prepare() to fail
x86/tdx: Wrap exit reason with hcall_func()
Pull x86 platform updates from Dave Hansen:
"Allow CPUs in SGX/HPE Ultraviolet to start using Sub-NUMA clustering
(SNC) mode. SNC has been around outside the UV world for a while but
evidently never worked on UV systems.
SNC is rather notorious for breaking bad assumptions of a 1:1
relationship between physical sockets and NUMA nodes. The UV code was
rather prolific with these assumptions and took quite a bit of
refactoring to remove them"
* tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Update UV[23] platform code for SNC
x86/platform/uv: Remove remaining BUG_ON() and BUG() calls
x86/platform/uv: UV support for sub-NUMA clustering
x86/platform/uv: Helper functions for allocating and freeing conversion tables
x86/platform/uv: When searching for minimums, start at INT_MAX not 99999
x86/platform/uv: Fix printed information in calc_mmioh_map
x86/platform/uv: Introduce helper function uv_pnode_to_socket.
x86/platform/uv: Add platform resolving #defines for misc GAM_MMIOH_REDIRECT*
Pull x86 irq updates from Dave Hansen:
"Add Hyper-V interrupts to /proc/stat"
* tag 'x86_irq_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add hardcoded hypervisor interrupts to /proc/stat
Pull x86 cpu updates from Borislav Petkov:
- Compute the purposeful misalignment of zen_untrain_ret automatically
and assert __x86_return_thunk's alignment so that future changes to
the symbol macros do not accidentally break them.
- Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is
pointless
* tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retbleed: Add __x86_return_thunk alignment checks
x86/cpu: Remove X86_FEATURE_NAMES
x86/Kconfig: Make X86_FEATURE_NAMES non-configurable in prompt
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
Pull x86 resource control updates from Borislav Petkov:
- Implement a rename operation in resctrlfs to facilitate handling of
application containers with dynamically changing task lists
- When reading the tasks file, show the tasks' pid which are only in
the current namespace as opposed to showing the pids from the init
namespace too
- Other fixes and improvements
* tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Documentation for MON group move feature
x86/resctrl: Implement rename op for mon groups
x86/resctrl: Factor rdtgroup lock for multi-file ops
x86/resctrl: Only show tasks' pid in current pid namespace
Pull x86 build update from Borislav Petkov:
- Remove relocation information from vmlinux as it is not needed by
other tooling and thus a slimmer binary is generated.
This is important for distros who have to distribute vmlinux blobs
with their kernel packages too and that extraneous unnecessary data
bloats them for no good reason
* tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Avoid relocation information in final vmlinux
Pull x86 instruction alternatives updates from Borislav Petkov:
- Up until now the Fast Short Rep Mov optimizations implied the
presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
setting so decouple that dependency in the kernel code too
- Teach the alternatives machinery to handle relocations
- Make debug_alternative accept flags in order to see only that set of
patching done one is interested in
- Other fixes, cleanups and optimizations to the patching code
* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: PAUSE is not a NOP
x86/alternatives: Add cond_resched() to text_poke_bp_batch()
x86/nospec: Shorten RESET_CALL_DEPTH
x86/alternatives: Add longer 64-bit NOPs
x86/alternatives: Fix section mismatch warnings
x86/alternative: Optimize returns patching
x86/alternative: Complicate optimize_nops() some more
x86/alternative: Rewrite optimize_nops() some
x86/lib/memmove: Decouple ERMS from FSRM
x86/alternative: Support relocations in alternatives
x86/alternative: Make debug-alternative selective
Pull RAS updates from Borislav Petkov:
- Add initial support for RAS hardware found on AMD server GPUs (MI200).
Those GPUs and CPUs are connected together through the coherent
fabric and the GPU memory controllers report errors through x86's MCA
so EDAC needs to support them. The amd64_edac driver supports now HBM
(High Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/amd64: Cache and use GPU node map
EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
EDAC/amd64: Document heterogeneous system enumeration
x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
x86/amd_nb: Re-sort and re-indent PCI defines
x86/amd_nb: Add MI200 PCI IDs
ras/debugfs: Fix error checking for debugfs_create_dir()
x86/MCE: Check a hw error's address to determine proper recovery action
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for Zen4 client hardware
- amd64_edac: Remove the version string as it is useless and actively
confusing when looking at backported versions of the driver
- Add a driver for the Nuvoton NPCM memory controller
- A debugfs error checking cleanup
* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/npcm: Add NPCM memory controller driver
dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
EDAC/thunderx: Check debugfs file creation retval properly
EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
EDAC/amd64: Remove module version string
Pull x86 core updates from Thomas Gleixner:
"A set of fixes for kexec(), reboot and shutdown issues:
- Ensure that the WBINVD in stop_this_cpu() has been completed before
the control CPU proceedes.
stop_this_cpu() is used for kexec(), reboot and shutdown to park
the APs in a HLT loop.
The control CPU sends an IPI to the APs and waits for their CPU
online bits to be cleared. Once they all are marked "offline" it
proceeds.
But stop_this_cpu() clears the CPU online bit before issuing
WBINVD, which means there is no guarantee that the AP has reached
the HLT loop.
This was reported to cause intermittent reboot/shutdown failures
due to some dubious interaction with the firmware.
This is not only a problem of WBINVD. The code to actually "stop"
the CPU which runs between clearing the online bit and reaching the
HLT loop can cause large enough delays on its own (think
virtualization). That's especially dangerous for kexec() as kexec()
expects that all APs are in a safe state and not executing code
while the boot CPU jumps to the new kernel. There are more issues
vs kexec() which are addressed separately.
Cure this by implementing an explicit synchronization point right
before the AP reaches HLT. This guarantees that the AP has
completed the full stop proceedure.
- Fix the condition for WBINVD in stop_this_cpu().
The WBINVD in stop_this_cpu() is required for ensuring that when
switching to or from memory encryption no dirty data is left in the
cache lines which might cause a write back in the wrong more later.
This checks CPUID directly because the feature bit might have been
cleared due to a command line option.
But that CPUID check accesses leaf 0x8000001f::EAX unconditionally.
Intel CPUs return the content of the highest supported leaf when a
non-existing leaf is read, while AMD CPUs return all zeros for
unsupported leafs.
So the result of the test on Intel CPUs is lottery and on AMD its
just correct by chance.
While harmless it's incorrect and causes the conditional wbinvd()
to be issued where not required, which caused the above issue to be
unearthed.
- Make kexec() robust against AP code execution
Ashok observed triple faults when doing kexec() on a system which
had been booted with "nosmt".
It turned out that the SMT siblings which had been brought up
partially are parked in mwait_play_dead() to enable power savings.
mwait_play_dead() is monitoring the thread flags of the AP's idle
task, which has been chosen as it's unlikely to be written to.
But kexec() can overwrite the previous kernel text and data
including page tables etc. When it overwrites the cache lines
monitored by an AP that AP resumes execution after the MWAIT on
eventually overwritten text, stack and page tables, which obviously
might end up in a triple fault easily.
Make this more robust in several steps:
1) Use an explicit per CPU cache line for monitoring.
2) Write a command to these cache lines to kick APs out of MWAIT
before proceeding with kexec(), shutdown or reboot.
The APs confirm the wakeup by writing status back and then
enter a HLT loop.
3) If the system uses INIT/INIT/STARTUP for AP bringup, park the
APs in INIT state.
HLT is not a guarantee that an AP won't wake up and resume
execution. HLT is woken up by NMI and SMI. SMI puts the CPU
back into HLT (+/- firmware bugs), but NMI is delivered to the
CPU which executes the NMI handler. Same issue as the MWAIT
scenario described above.
Sending an INIT/INIT sequence to the APs puts them into wait
for STARTUP state, which is safe against NMI.
There is still an issue remaining which can't be fixed: #MCE
If the AP sits in HLT and receives a broadcast #MCE it will try to
handle it with the obvious consequences.
INIT/INIT clears CR4.MCE in the AP which will cause a broadcast
#MCE to shut down the machine.
So there is a choice between fire (HLT) and frying pan (INIT).
Frying pan has been chosen as it's at least preventing the NMI
issue.
On systems which are not using INIT/INIT/STARTUP there is not much
which can be done right now, but at least the obvious and easy to
trigger MWAIT issue has been addressed"
* tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Put CPUs into INIT on shutdown if possible
x86/smp: Split sending INIT IPI out into a helper function
x86/smp: Cure kexec() vs. mwait_play_dead() breakage
x86/smp: Use dedicated cache-line for mwait_play_dead()
x86/smp: Remove pointless wmb()s from native_stop_other_cpus()
x86/smp: Dont access non-existing CPUID leaf
x86/smp: Make stop_other_cpus() more robust
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
