The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: a5d6b1ac56 ("phy: qcom-qmp-usb: fix memleak on probe deferral")
CC: Johan Hovold <johan@kernel.org>
CC: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414125050.2118619-1-chenyuan0y@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Cadence Torrent SERDES supports USXGMII protocol. Hence, update the
bindings to allow PHY_TYPE_USXGMII. Since PHY_TYPE_USXGMII has the value
of "12" while the existing maximum allowed PHY TYPE is "9", switch back to
using "enum" property in the bindings to account for this discontinuity.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250411055743.623135-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Although, in theory, the clock provider functionality could be enabled
as a standalone driver feature, in practice it is unlikely that it would
be ever needed separately from the common PHY related features, i.e.
making use of the PHY PLL as an alternative and more accurate clock
source for display modes handling. Which means the PLL will be always
programmed according to the TMDS char rate set via the HDMI PHY
configuration API.
Currently it's possible to freely adjust the rate via the clock API as
well, that is through clk_set_rate(). Making the clock read-only is not
feasible since we need to ensure any rate update done via the PHY
configuration API has been actually programmed into the hardware before
CCF accesses it. This would be normally done during phy_ops.power_on()
or clk_ops.prepare() callbacks, but it might happen that the former gets
fired too late and the latter only once, hence we need to keep handle it
via clk_ops.set_rate() as a fallback approach.
Prevent changing the TMDS character rate via CCF by letting
rk_hdptx_phy_clk_round_rate() always return the value set via
phy_configure(). To avoid breaking existing users, i.e. RK DW HDMI QP
bridge driver, until the switch to the HDMI PHY config based approach is
completed, introduce a temporary exception to the rule, toggled via the
new ->restrict_rate_change flag, which indicates whether phy_configure()
has been called or not.
Additionally, revert any unlikely rate change that might have occurred
between the calls to ->round_rate() and ->set_rate().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-11-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current workaround to setup the TMDS character rate relies on the
unconventional usage of phy_set_bus_width().
Make use of the recently introduced HDMI PHY configuration API to
properly handle the setup. The workaround will be dropped as soon as
the switch has been completed on both ends.
Rename rk_hdptx_phy_verify_config() to rk_hdptx_phy_verify_dp_config()
and introduce the rk_hdptx_phy_verify_hdmi_config() helper to check the
HDMI parameters during phy_configure().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-9-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ropll_tmds_cfg table used to identify the configuration params for
the supported rates expects the search key, i.e. bit_rate member of
struct ropll_config, to be provided in hHz rather than Hz (1 hHz = 100
Hz). This requires multiple conversions between these units being
performed at runtime.
Improve implementation clarity and efficiency by consistently using the
Hz unit throughout driver's internal data structures and functions.
Also rename the rather misleading struct member.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-8-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some QCOM PCIe PHYs support no_csr reset. Unlike BCR reset which resets the
whole PHY (hardware and register), no_csr reset only resets PHY hardware
but retains register values, which means PHY setting can be skipped during
PHY init if PCIe link is enabled in bootloader and only no_csr is toggled
after that.
Hence, determine whether the PHY has been enabled in bootloader by
verifying QPHY_START_CTRL register. If it's programmed and no_csr reset is
available, skip BCR reset and PHY register setting to establish the PCIe
link with bootloader - programmed PHY settings.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250411113120.651363-3-quic_wenbyao@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement support for Exynos7870 USB DRD on top of the existing
exynos5-usbdrd driver.
Exynos7870 has a single USB 2.0 DRD PHY controller and no 3.0 PHYs. Thus,
it only supports the UTMI interface.
Moreover, the PMU register offset for enabling the PHY controller is
different for SoCs such as Exynos7870, where BIT(0) is for the 3.0 PHY and
BIT(1) is for the 2.0 PHY. The phy_isol function for Exynos7870 uses the
appropriate register offsets.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-3-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Most Exynos850 and Exynos9 (GS101) DRD PHY registers use GENMASK for masks
and FIELD_PREP for writing values to registers.
Rewrite the register definitions which don't follow this approach to follow
it as much as possible. This patch doesn't introduce any fixes or
functional changes, it's merely an attempt to introduce some uniformity and
consistency in the driver code.
The CRPORT SuperSpeed control registers have been exempted from this
change. Since the writing of register values do not require any masking
operations, implementing it would unnecessarily complicate things.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-1-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
