Add support to convert from XR24 to reversed monochrome for drivers that
control monochromatic display panels, that only have 1 bit per pixel.
The function does a line-by-line conversion doing an intermediate step
first from XR24 to 8-bit grayscale and then to reversed monochrome.
The drm_fb_gray8_to_mono_reversed_line() helper was based on code from
drivers/gpu/drm/tiny/repaper.c driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-3-javierm@redhat.com
Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.
We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.
Let's add a new debugfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.3.I209d72bcc571e1d7d6b793db71bf15c9c0fc9292@changeid
We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.
NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.
As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge
connector. It should use the normal drm_bridge_connector. Let's switch
to do that, removing all of the custom code.
NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR
support for ti-sn65dsi86 and that would still be a useful thing to do
in the future. It was attempted in the past [1] but put on the back
burner. However, unless we instantly change ti-sn65dsi86 fully from
not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_
supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit
of time when we support both. This is a better way to support the old
way where the driver hand rolls things itself.
A new notes about the implementation here:
* When using the drm_bridge_connector the connector should be created
after all the bridges, so we change the ordering a bit.
* I'm reasonably certain that we don't need to do anything to "free"
the new drm_bridge_connector. If drm_bridge_connector_init() returns
success then we know drm_connector_init() was called with the
`drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a
.destroy() that does all the cleanup. drm_connector_init() calls
__drm_mode_object_add() with a drm_connector_free() that will call
the .destroy().
* I'm also reasonably certain that I don't need to "undo" the
drm_bridge_attach() if drm_bridge_connector_init() fails. The
"detach" function is private and other similar code doesn't try to
undo the drm_bridge_attach() in error cases. There's also a comment
indicating the lack of balance at the top of drm_bridge_attach().
[1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.com
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.1.I3ab26b7f197cc56c874246a43e57913e9c2c1028@changeid
Support reading edid through aux channel if panel is connected to aux
bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function:
1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move
anx7625_parse_dt() after.
2. Use pm runtime autosuspend since aux transfer function is called
multiple times when reading edid.
3. No-op if aux transfer length is 0.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-3-hsinyi@chromium.org
Currently when users try to run an application with lima and that hits
an issue such as a timeout, a message saying "fail to save task state"
and "error task list is full" is shown in dmesg.
The error task dump is a debug feature disabled by default, so the
error task list is usually not going to be available at all.
The message can be misleading and creates confusion in bug reports.
We can avoid that code path and that particular message when the user
has not explicitly set the max_error_tasks parameter to enable the
feature.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209093700.30901-1-nunes.erico@gmail.com
The IDVS group size feature was missing. It is used on some Bifrost and
Valhall GPUs, and is the last kernel-relevant Bifrost feature we're
missing.
This feature adds an extra IDVS group size field to the JM_CONFIG
register. In kbase, the value is configurable via the device tree; kbase
uses 0xF as a default if no value is specified. Until we find a device
demanding otherwise, let's always set the 0xF default on devices which
support this feature mimicking kbase's behaviour.
Tuning this register slightly improves performance of index-driven
vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is
improved from 1026 to 1037. Geometry-heavy scenes like -bshading are
improved from 1068 to 1098.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211145849.3148-1-alyssa.rosenzweig@collabora.com
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d1 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
Add drm_fb_helper_memory_range_to_clip(), a helper function that
accepts an linear range of video memory and converts it into a
rectangle. The computed rectangle describes the damaged area in
terms of scanlines and pixels per scanline.
While at it, make the code more readable by using struct drm_rect
and related helpers.
The code was previously part of the deferred I/O helpers, but is
also useful for damage handling of regular write operations. Update
the deferred I/O code to use the new function.
v2:
* rename helper (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-4-tzimmermann@suse.de
Don't clip the damage rectangle against the viewport. This only
works if the viewport is located at the beginning of the video
memory and the video memory doesn't extend the screen (i.e., if
there's no overallocation).
Fbdev emulation transfers data from write operations into a
possible shadow buffer, then into a GEM buffer object, and finally
via graphics driver onto the screen.
If callers write outside the currently visible area, clipping the
damage rectangle against the viewport will loose these updates in
the shadow buffer and the fbdev's buffer object will contain stale
data. Panning the viewport to the stale area of the buffer will
display obsolete data.
Instead, mark all written areas as damaged, so that the damage
handler updates the buffer object from the shadow buffer for all
such areas. The graphics driver's later has the option of clipping
the damaged area against the viewport when updating the screen
from the buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-3-tzimmermann@suse.de
This functions needs to be split into 2 parts where
one is called only once for locking single instance of
reset_domain's sem and reset flag and the other part
which handles MP1 states should still be called for
each device in XGMI hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74118.html
The reset domain contains register access semaphor
now and so needs to be present as long as each device
in a hive needs it and so it cannot be binded to XGMI
hive life cycle.
Adress this by making reset domain refcounted and pointed
by each member of the hive and the hive itself.
v4:
Fix crash on boot witrh XGMI hive by adding type to reset_domain.
XGMI will only create a new reset_domain if prevoius was of single
device type meaning it's first boot. Otherwsie it will take a
refocunt to exsiting reset_domain from the amdgou device.
Add a wrapper around reset_domain->refcount get/put
and a wrapper around send to reset wq (Lijo)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74121.html
No need to to trigger another work queue inside the work queue.
v3:
Problem:
Extra reset caused by host side FLR notification
following guest side triggered reset.
Fix: Preven qeuing flr_work from mailbox irq if guest
already executing a reset.
Suggested-by: Liu Shaoyun <Shaoyun.Liu@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Liu Shaoyun <Shaoyun.Liu@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74114.html
Use reset domain wq also for non TDR gpu recovery trigers
such as sysfs and RAS. We must serialize all possible
GPU recoveries to gurantee no concurrency there.
For TDR call the original recovery function directly since
it's already executed from within the wq. For others just
use a wrapper to qeueue work and wait on it to finish.
v2: Rename to amdgpu_recover_work_struct
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74113.html
Before we initialize schedulers we must know which reset
domain are we in - for single device there iis a single
domain per device and so single wq per device. For XGMI
the reset domain spans the entire XGMI hive and so the
reset wq is per hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74112.html
