Each invocation of userfaultfd for "anon" and "shmem" was taking about
6.5 sec to run, contributing to an overall run time of about 22 sec for
run_vmtests.sh.
Reduce the size and bounce input values to the userfaultfd invocation
within run_vmtests.sh, enough to get each invocation down to about 1.0
sec. This should still provide a reasonable smoke test, while staying
within a nominal time budget of around 1 second or so per test. And this
brings the overall running time of run_vmtests.sh down to 11 second.
Link: https://lkml.kernel.org/r/20201026064021.3545418-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM selftests are incredibly useful, but they are only effective if people
actually build and run them. All the other tests in selftests/vm can be
built with very standard, always-available libraries: libpthread, librt.
The hmm-tests.c program, on the other hand, requires something that is
(much) less readily available: libhugetlbfs. And so the build will
typically fail for many developers.
A simple attempt to install libhugetlbfs will also run into complications
on some common distros these days: Fedora and Arch Linux (yes, Arch AUR
has it, but that's fragile, as always with AUR). The library is not
maintained actively enough at the moment, for distros to deal with it. I
had to build it from source, for Fedora, and that didn't go too smoothly
either.
It turns out that, out of 21 tests in hmm-tests.c, only 2 actually require
functionality from libhugetlbfs. Therefore, if libhugetlbfs is missing,
simply ifdef those two tests out and allow the developer to at least have
the other 19 tests, if they don't want to pause to work through the above
issues. Also issue a warning, so that it's clear that there is an
imperfection in the build.
In order to do that, a tiny shell script (check_config.sh) runs a quick
compile (not link, that's too prone to false failures with library paths),
and basically, if the compiler doesn't find hugetlbfs.h in its standard
locations, then the script concludes that libhugetlbfs is not available.
The output is in two files, one for inclusion in hmm-test.c
(local_config.h), and one for inclusion in the Makefile (local_config.mk).
Link: https://lkml.kernel.org/r/20201026064021.3545418-9-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For quite a while, I was doing a quick hack to gup_test.c (previously,
gup_benchmark.c) whenever I wanted to try out my changes to dump_page().
This makes that hack unnecessary, and instead allows anyone to easily get
the same coverage from a user space program. That saves a lot of time
because you don't have to change the kernel, in order to test different
pages and options.
The new sub-test takes advantage of the existing gup_test infrastructure,
which already provides a simple user space program, some allocated user
space pages, an ioctl call, pinning of those pages (via either
get_user_pages or pin_user_pages) and a corresponding kernel-side test
invocation. There's not much more required, mainly just a couple of
inputs from the user.
In fact, the new test re-uses the existing command line options in order
to get various helpful combinations (THP or normal, _fast or slow gup, gup
vs. pup, and more).
New command line options are: which pages to dump, and what type of
"get/pin" to use.
In order to figure out which pages to dump, the logic is:
* If the user doesn't specify anything, the page 0 (the first page in
the address range that the program sets up for testing) is dumped.
* Or, the user can type up to 8 page indices anywhere on the command
line. If you type more than 8, then it uses the first 8 and ignores the
remaining items.
For example:
./gup_test -ct -F 1 0 19 0x1000
Meaning:
-c: dump pages sub-test
-t: use THP pages
-F 1: use pin_user_pages() instead of get_user_pages()
0 19 0x1000: dump pages 0, 19, and 4096
Link: https://lkml.kernel.org/r/20201026064021.3545418-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Therefore, some minor cleanup and improvements are in order:
1. Rename the other items appropriately.
2. Stop reporting timing information on the non-benchmark items. It's
still being recorded and is available, but there's no point in
cluttering up the report with data that no one reasonably needs to
check.
3. Don't do iterations, for non-benchmark items.
4. Print out a shorter, more appropriate report for the non-benchmark
tests.
5. Add the command that was run, to the report. This really helps, as
there are quite a lot of options now.
6. Use a larger integer type for cmd, now that it's being compared
Otherwise it doesn't work, because in this case cmd is about 3 billion,
which is the perfect size for problems with signed vs unsigned int.
Link: https://lkml.kernel.org/r/20201026064021.3545418-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid the need to copy-paste the gup_test ioctl commands and the struct
gup_test definition, between the kernel and the user space application, by
providing a new header file for these. This allows easier and safer
adding of new ioctl calls, as well as reducing the overall line count.
Details: The header file has to be able to compile independently, because
of the arguably unfortunate way that the Makefile is written: the Makefile
tries to build all of its prerequisites, when really it should be only
building the .c files, and leaving the other prerequisites (LOCAL_HDRS) as
pure dependencies.
That Makefile limitation is probably not worth fixing, but it explains why
one of the includes had to be moved into the new header file.
Also: simplify the ioctl struct (struct gup_test), by deleting the unused
__expansion[10] field. This sort of thing is what you might see in a
stable ABI, but this low-level, kernel-developer-oriented selftests/vm
system is very much not subject to ABI stability. So "expansion" and
"reserved" fields are unnecessary here.
Link: https://lkml.kernel.org/r/20201026064021.3545418-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3.
Summary: This series provides two main things, and a number of smaller
supporting goodies. The two main points are:
1) Add a new sub-test to gup_test, which in turn is a renamed version
of gup_benchmark. This sub-test allows nicer testing of dump_pages(),
at least on user-space pages.
For quite a while, I was doing a quick hack to gup_test.c whenever I
wanted to try out changes to dump_page(). Then Matthew Wilcox asked me
what I meant when I said "I used my dump_page() unit test", and I
realized that it might be nice to check in a polished up version of
that.
Details about how it works and how to use it are in the commit
description for patch #6 ("selftests/vm: gup_test: introduce the
dump_pages() sub-test").
2) Fixes a limitation of hmm-tests: these tests are incredibly useful,
but only if people actually build and run them. And it turns out that
libhugetlbfs is a little too effective at throwing a wrench in the
works, there. So I've added a little configuration check that removes
just two of the 21 hmm-tests, if libhugetlbfs is not available.
Further details in the commit description of patch #8
("selftests/vm: hmm-tests: remove the libhugetlbfs dependency").
Other smaller things that this series does:
a) Remove code duplication by creating gup_test.h.
b) Clear up the sub-test organization, and their invocation within
run_vmtests.sh.
c) Other minor assorted improvements.
[1] v2 is here:
https://lore.kernel.org/linux-doc/20200929212747.251804-1-jhubbard@nvidia.com/
[2] https://lore.kernel.org/r/CAHk-=wgh-TMPHLY3jueHX7Y2fWh3D+nMBqVS__AZm6-oorquWA@mail.gmail.com
This patch (of 9):
Rename nearly every "gup_benchmark" reference and file name to "gup_test".
The one exception is for the actual gup benchmark test itself.
The current code already does a *little* bit more than benchmarking, and
definitely covers more than get_user_pages_fast(). More importantly,
however, subsequent patches are about to add some functionality that is
non-benchmark related.
Closely related changes:
* Kconfig: in addition to renaming the options from GUP_BENCHMARK to
GUP_TEST, update the help text to reflect that it's no longer a
benchmark-only test.
Link: https://lkml.kernel.org/r/20201026064021.3545418-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20201026064021.3545418-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To fix a kernel-doc markups issue:
mm/truncate.c:646: warning: Function parameter or member 'mapping' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'start' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'end' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'nr_pagevec' not described in 'invalidate_mapping_pagevec'
Link: https://lkml.kernel.org/r/1605605088-30668-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert generic_file_buffered_read() to get pages to read from in batches,
and then copy data to userspace from many pages at once - in particular,
we now don't touch any cachelines that might be contended while we're in
the loop to copy data to userspace.
This is is a performance improvement on workloads that do buffered reads
with large blocksizes, and a very large performance improvement if that
file is also being accessed concurrently by different threads.
On smaller reads (512 bytes), there's a very small performance improvement
(1%, within the margin of error).
akpm: kernel test robot found a 32% speedup on one test:
https://lkml.kernel.org/r/20201030081456.GY31092@shao2-debian
Link: https://lkml.kernel.org/r/20201025212949.602194-3-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "generic_file_buffered_read() improvements", v2.
generic_file_buffered_read() has turned into a real monstrosity to work
with. And it's a major performance improvement, for both small random and
large sequential reads. On my test box, 4k buffered random reads go from
~150k to ~250k iops, and the improvements to big sequential reads are even
bigger.
This incorporates the fix for IOCB_WAITQ handling that Jens just posted as
well, also factors out lock_page_for_iocb() to improve handling of the
various iocb flags.
This patch (of 2):
This is prep work for changing generic_file_buffered_read() to use
find_get_pages_contig() to batch up all the pagecache lookups.
This patch should be functionally identical to the existing code and
changes as little as of the flow control as possible. More refactoring
could be done, this patch is intended to be relatively minimal.
Link: https://lkml.kernel.org/r/20201025212949.602194-1-kent.overstreet@gmail.com
Link: https://lkml.kernel.org/r/20201025212949.602194-2-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Collect the time for each allocation recorded in page owner so that
allocation "surges" can be measured.
Record the pid for each allocation recorded in page owner so that the
source of allocation "surges" can be better identified.
The above is very useful when doing memory analysis. On a crash for
example, we can get this information from kdump (or ramdump) and parse it
to figure out memory allocation problems.
Please note that on x86_64 this increases the size of struct page_owner
from 16 bytes to 32.
Vlastimil: it's not a functionality intended for production, so unless
somebody says they need to enable page_owner for debugging and this
increase prevents them from fitting into available memory, let's not
complicate things with making this optional.
[lmark@codeaurora.org: v3]
Link: https://lkml.kernel.org/r/20201210160357.27779-1-georgi.djakov@linaro.org
Link: https://lkml.kernel.org/r/20201209125153.10533-1-georgi.djakov@linaro.org
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page owner of pages used by page owner itself used is missing on arm32
targets. The reason is dummy_handle and failure_handle is not initialized
correctly. Buddy allocator is used to initialize these two handles.
However, buddy allocator is not ready when page owner calls it. This
change fixed that by initializing page owner after buddy initialization.
The working flow before and after this change are:
original logic:
1. allocated memory for page_ext(using memblock).
2. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
3. initialize buddy.
after this change:
1. allocated memory for page_ext(using memblock).
2. initialize buddy.
3. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
with the change, failure/dummy_handle can get its correct value and page
owner output for example has the one for page owner itself:
Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns
PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0()
init_page_owner+0x28/0x2f8
invoke_init_callbacks_flatmem+0x24/0x34
start_kernel+0x33c/0x5d8
Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page order of the slab that gets chosen for a given slab cache depends
on the number of objects that can be fit in the slab while meeting other
requirements. We start with a value of minimum objects based on
nr_cpu_ids that is driven by possible number of CPUs and hence could be
higher than the actual number of CPUs present in the system. This leads
to calculate_order() chosing a page order that is on the higher side
leading to increased slab memory consumption on systems that have bigger
page sizes.
Hence rely on the number of online CPUs when determining the mininum
objects, thereby increasing the chances of chosing a lower conservative
page order for the slab.
Vlastimil said:
"Ideally, we would react to hotplug events and update existing caches
accordingly. But for that, recalculation of order for existing caches
would have to be made safe, while not affecting hot paths. We have
removed the sysfs interface with 32a6f409b6 ("mm, slub: remove
runtime allocation order changes") as it didn't seem easy and worth
the trouble.
In case somebody wants to start with a large order right from the
boot because they know they will hotplug lots of cpus later, they can
use slub_min_objects= boot param to override this heuristic. So in
case this change regresses somebody's performance, there's a way
around it and thus the risk is low IMHO"
Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.com
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator expects that page->mapping is NULL for a page being
freed. SLAB and SLUB use the slab_cache field which is in union with
mapping, but before freeing the page, the field is referenced with the
"mapping" name when set to NULL.
It's IMHO more correct (albeit functionally the same) to use the
slab_cache name as that's the field we use in SL*B, and document why we
clear it in a comment (we don't clear fields such as s_mem or freelist, as
page allocator doesn't care about those). While using the 'mapping' name
would automagically keep the code correct if the unions in struct page
changed, such changes should be done consciously and needed changes
evaluated - the comment should help with that.
Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.
The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.
This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:
In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
from ../include/tst_netlink.h:14,
from tst_crypto.c:13:
x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/tst_safe_macros.h:15,
from ../include/tst_test.h:93,
from tst_crypto.c:11:
x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kthread worker API is simple. In short, it allows to create, use, and
destroy workers. kthread_create_worker_on_cpu() just allows to bind a
newly created worker to a given CPU.
It is up to the API user how to handle CPU hotplug. They have to decide
how to handle pending work items, prevent queuing new ones, and restore
the functionality when the CPU goes off and on. There are few catches:
+ The CPU affinity gets lost when it is scheduled on an offline CPU.
+ The worker might not exist when the CPU was off when the user
created the workers.
A good practice is to implement two CPU hotplug callbacks and
destroy/create the worker when CPU goes down/up.
Mention this in the function description.
[akpm@linux-foundation.org: grammar tweaks]
Link: https://lore.kernel.org/r/20201028073031.4536-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/20201102101039.19227-1-pmladek@suse.com
Reported-by: Zhang Qiang <Qiang.Zhang@windriver.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in drivers:
- hisi_sas: fix internal queue timeout
- be2iscsi: revert a prior fix causing problems
- bnx2i: add missing dependency
- storvsc: late arriving revert of a problem fix
and one in the core.
The core one is a minor change to stop paying attention to the busy
count when returning out of resources because there's a race window
where the queue might not restart due to missing returning I/O"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
scsi: hisi_sas: Select a suitable queue for internal I/Os
scsi: core: Fix race between handling STS_RESOURCE and completion
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
scsi: bnx2i: Requires MMU
Pull i2c fix from Wolfram Sang:
"Bugfix for the AT24 EEPROM driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
misc: eeprom: at24: fix NVMEM name with custom AT24 device name
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools/kvm_stat: Exempt time-based counters
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
kvm: x86/mmu: Use cpuid to determine max gfn
kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
selftests: kvm/set_memory_region_test: Fix race in move region test
KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
KVM: arm64: Fix handling of merging tables into a block entry
KVM: arm64: Fix memory leak on stage2 update of a valid PTE
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
