Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Code used to create standalone and widget controls is mostly same, with
with exception that in standalone case dynamic object needs to be
registered and control created directly.
Following patches clean up and unify kcontrol creation code in topology
code.
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control
is not writeable.
The cs_dsp code originated as an ASoC driver (wm_adsp) where all
controls were exported as ALSA controls. It relied on ALSA to
enforce the read-only permission. Now that the code has been
separated from ALSA/ASoC it must perform its own permission check.
This isn't currently causing any problems so there shouldn't be any
need to backport this. If the client of cs_dsp exposes the control as
an ALSA control, it should set permissions on that ALSA control to
protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers
are for writable controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240702110809.16836-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would work,
but might be not user friendly in some case, for example in case of system
hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state names.
Original
> amixer set "MUX" "Input 1"
> amixer set "MUX" "Input 2"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
=> state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
> amixer set "MUX" "Label_B"
Merge series from srinivas.kandagatla@linaro.org:
Existing way of allocating soundwire master ports on Qualcommm platforms is
dynamic, and in linear order starting from 1 to MAX_PORTS.
This will work as long as soundwire device ports are 1:1 mapped
linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these
are NOT mapped in that order.
The result of this is that only one speaker among the pair of speakers
is always silent, With recent changes for WSA codec to support codec
versions and along with these patches we are able to get all speakers
working on these SoCs.
bitfield.h is not explicitly included but it is required for FIELD_PREP
to be expanded by the preprocessor. If it is not implicitly included,
there will be a compiler error (as seen with ARCH=hexagon allmodconfig):
sound/soc/fsl/lpc3xxx-i2s.c:169:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
169 | tmp |= LPC3XXX_I2S_WW8 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW8_HP);
| ^
sound/soc/fsl/lpc3xxx-i2s.h:42:30: note: expanded from macro 'LPC3XXX_I2S_WW8'
42 | #define LPC3XXX_I2S_WW8 FIELD_PREP(0x3, 0) /* Word width is 8bit */
| ^
sound/soc/fsl/lpc3xxx-i2s.c:205:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
205 | LPC3XXX_I2S_DMA1_TX_EN | LPC3XXX_I2S_DMA0_TX_DEPTH(4));
| ^
sound/soc/fsl/lpc3xxx-i2s.h:65:38: note: expanded from macro 'LPC3XXX_I2S_DMA0_TX_DEPTH'
65 | #define LPC3XXX_I2S_DMA0_TX_DEPTH(s) FIELD_PREP(0xF0000, s) /* Set the DMA1 TX Request level */
| ^
sound/soc/fsl/lpc3xxx-i2s.c:210:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
210 | LPC3XXX_I2S_DMA0_RX_EN | LPC3XXX_I2S_DMA1_RX_DEPTH(4));
| ^
sound/soc/fsl/lpc3xxx-i2s.h:70:38: note: expanded from macro 'LPC3XXX_I2S_DMA1_RX_DEPTH'
70 | #define LPC3XXX_I2S_DMA1_RX_DEPTH(s) FIELD_PREP(0x700, s) /* Set the DMA1 RX Request level */
| ^
Include bitfield.h explicitly, so that FIELD_PREP is always expanded,
clearing up the compiler error.
Fixes: 0959de657a ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240701-lpc32xx-asoc-fix-include-for-field_prep-v1-1-0c5d7f71921b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
clang points out that ret may be used uninitialized in
lpc32xx_i2s_probe() in an error pointer path (which becomes fatal with
CONFIG_WERROR):
sound/soc/fsl/lpc3xxx-i2s.c:326:47: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
326 | "failed to init register map: %d\n", ret);
| ^~~
sound/soc/fsl/lpc3xxx-i2s.c:310:9: note: initialize the variable 'ret' to silence this warning
310 | int ret;
| ^
| = 0
1 error generated.
One solution would be a small refactoring of the second parameter in
dev_err_probe(), PTR_ERR(i2s_info_p->regs), to be the value of ret in
the if statement. However, a nicer solution for debugging purposes,
which is the point of this statement, would be to use the '%pe'
specifier to symbolically print the error pointer value. Do so, which
eliminates the uninitialized use of ret, clearing up the warning.
Fixes: 0959de657a ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240701-lpc32xx-asoc-fix-uninitialized-ret-v1-1-985d86189739@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Original
> amixer set "MUX" "Input 1"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msn27xpg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts a series of commits that allowed for the ASP
registers to be owned by either the driver or the firmware. Nothing
currently depends on the functionality that is being reverted, so
it is safe to remove.
The commits being reverted are (last 3 are bugfixes to the first 2):
commit 72a77d7631
("ASoC: cs35l56: Fix to ensure ASP1 registers match cache")
commit 07f7d6e7a1
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
commit 4703b014f2
("ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()")
commit c14f09f010
("ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization")
commit dfd2ffb373
("ASoC: cs35l56: Prevent overwriting firmware ASP config")
These reverts have been squashed into a single commit because there
would be no reason to revert only some of them (which would just
reintroduce bugs).
The changes introduced by the commits were well-intentioned but
somewhat misguided. ACPI does not provide any information about how
audio hardware is linked together, so that information has to be
hardcoded into drivers. On Windows the firmware is customized to
statically setup appropriate configuration of the audio links,
and the intent of the commits was to re-use this information if the
Linux host drivers aren't taking control of the ASP. This would
avoid having to hardcode the ASP config into the machine driver on
some systems.
However, this added complexity and race conditions into the driver.
It also complicates implementation of new code.
The only case where the ASP is used but the host is not taking
ownership is when CS35L56 is used in SoundWire mode with the ASP
as a reference audio interconnect. But even in that case it's not
necessarily required even if the firmware initialized it. Typically
it is used to avoid the host SDCA drivers having to be capable of
aggregating capture paths from multiple SoundWire peripherals. But
the SOF SoundWire support is capable of doing that aggregation.
Reverting all these commits significantly simplifies the driver.
Let's just use the normal Linux mechanisms of the machine driver and
ALSA controls to set things up instead of trying to use the firmware
to do use-case setup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>:
This pach set is to bring back audio to machines with a LPC32XX CPU.
The legacy LPC32XX SoC used to have audio spport in linux 2.6.27.
The support was dropped due to lack of interest from mainaeners.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.
The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately in fsl_sai driver.
There will be three devices for audiomix sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output.
