Add a Rust driver for ARM Mali CSF-based GPUs. It is a port of Panthor
and therefore exposes Panthor's uAPI and name to userspace, and the
product of a joint effort between Collabora, Arm and Google engineers.
The aim is to incrementally develop Tyr with the abstractions that are
currently available until it is consider to be in parity with Panthor
feature-wise.
The development of Tyr itself started in January, after a few failed
attempts of converting Panthor piecewise through a mix of Rust and C
code. There is a downstream branch that's much further ahead in terms of
capabilities than this initial patch.
The downstream code is capable of booting the MCU, doing sync VM_BINDS
through the work-in-progress GPUVM abstraction and also doing (trivial)
submits through Asahi's drm_scheduler and dma_fence abstractions. So
basically, most of what one would expect a modern GPU driver to do,
except for power management and some other very important adjacent
pieces. It is not at the point where submits can correctly deal with
dependencies, or at the point where it can rotate access to the GPU
hardware fairly through a software scheduler, but that is simply a
matter of writing more code.
This first patch, however, only implements a subset of the current
features available downstream, as the rest is not implementable without
pulling in even more abstractions. In particular, a lot of things depend
on properly mapping memory on a given VA range, which itself depends on
the GPUVM abstraction that is currently work-in-progress. For this
reason, we still cannot boot the MCU and thus, cannot do much for the
moment.
This constitutes a change in the overall strategy that we have been
using to develop Tyr so far. By submitting small parts of the driver
upstream iteratively, we aim to:
a) evolve together with Nova and rvkms, hopefully reducing regressions
due to upstream changes (that may break us because we were not there, in
the first place)
b) prove any work-in-progress abstractions by having them run on a real
driver and hardware and,
c) provide a reason to work on and review said abstractions by providing
a user, which would be tyr itself.
Despite its limited feature-set, we offer IGT tests. It is only tested
on the rk3588, so any other SoC is probably not going to work at all for
now.
The skeleton is basically taken from Nova and also
rust_platform_driver.rs.
Lastly, the name "Tyr" is inspired by Norse mythology, reflecting ARM's
tradition of naming their GPUs after Nordic mythological figures and
places.
Co-developed-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Co-developed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://www.collabora.com/news-and-blog/news-and-events/introducing-tyr-a-new-rust-drm-driver.html
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
[aliceryhl: minor Kconfig update on apply]
[aliceryhl: s/drm::device::/drm::/]
Link: https://lore.kernel.org/r/20250910-tyr-v3-1-dba3bc2ae623@collabora.com
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
We need the DRM Rust changes that went into drm-misc before the
existence of the drm-rust tree in here as well.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Now that my rust skills have been honed, I noticed that there's a lot of
generics in our gem bindings that don't actually need to be here. Currently
the hierarchy of traits in our gem bindings looks like this:
* Drivers implement:
* BaseDriverObject<T: DriverObject> (has the callbacks)
* DriverObject (has the drm::Driver type)
* Crate implements:
* IntoGEMObject for Object<T> where T: DriverObject
Handles conversion to/from raw object pointers
* BaseObject for T where T: IntoGEMObject
Provides methods common to all gem interfaces
Also of note, this leaves us with two different drm::Driver associated
types:
* DriverObject::Driver
* IntoGEMObject::Driver
I'm not entirely sure of the original intent here unfortunately (if anyone
is, please let me know!), but my guess is that the idea would be that some
objects can implement IntoGEMObject using a different ::Driver than
DriverObject - presumably to enable the usage of gem objects from different
drivers. A reasonable usecase of course.
However - if I'm not mistaken, I don't think that this is actually how
things would go in practice. Driver implementations are of course
implemented by their associated drivers, and generally drivers are not
linked to each-other when building the kernel. Which is to say that even in
a situation where we would theoretically deal with gem objects from another
driver, we still wouldn't have access to its drm::driver::Driver
implementation. It's more likely we would simply want a variant of gem
objects in such a situation that have no association with a
drm::driver::Driver type.
Taking that into consideration, we can assume the following:
* Anything that implements BaseDriverObject will implement DriverObject
In other words, all BaseDriverObjects indirectly have an associated
::Driver type - so the two traits can be combined into one with no
generics.
* Not everything that implements IntoGEMObject will have an associated
::Driver, and that's OK.
And with this, we now can do quite a bit of cleanup with the use of
generics here. As such, this commit:
* Removes the generics on BaseDriverObject
* Moves DriverObject::Driver into BaseDriverObject
* Removes DriverObject
* Removes IntoGEMObject::Driver
* Add AllocImpl::Driver, which we can use as a binding to figure out the
correct File type for BaseObject
Leaving us with a simpler trait hierarchy that now looks like this:
* Drivers implement: BaseDriverObject
* Crate implements:
* IntoGEMObject for Object<T> where T: DriverObject
* BaseObject for T where T: IntoGEMObject
Which makes the code a lot easier to understand and build on :).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250908185239.135849-2-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Add a safe Rust abstraction for the kernel's scatter-gather list
facilities (`struct scatterlist` and `struct sg_table`).
This commit introduces `SGTable<T>`, a wrapper that uses a generic
parameter to provide compile-time guarantees about ownership and lifetime.
The abstraction provides two primary states:
- `SGTable<Owned<P>>`: Represents a table whose resources are fully
managed by Rust. It takes ownership of a page provider `P`, allocates
the underlying `struct sg_table`, maps it for DMA, and handles all
cleanup automatically upon drop. The DMA mapping's lifetime is tied to
the associated device using `Devres`, ensuring it is correctly unmapped
before the device is unbound.
- `SGTable<Borrowed>` (or just `SGTable`): A zero-cost representation of
an externally managed `struct sg_table`. It is created from a raw
pointer using `SGTable::from_raw()` and provides a lifetime-bound
reference (`&'a SGTable`) for operations like iteration.
The API exposes a safe iterator that yields `&SGEntry` references,
allowing drivers to easily access the DMA address and length of each
segment in the list.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250828133323.53311-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Introduce the VmallocPageIter type; an instance of VmallocPageIter may
be exposed by owners of vmalloc allocations to provide borrowed access
to its backing pages.
For instance, this is useful to access and borrow the backing pages of
allocation primitives, such as Box and Vec, backing a scatterlist.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250820145434.94745-4-dakr@kernel.org
[ Drop VmallocPageIter::base_address(), move to allocator/iter.rs and
stub VmallocPageIter for allocator_test.rs. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
`FromBytes::from_bytes` comes with a few practical limitations:
- It requires the bytes slice to have the same alignment as the returned
type, which might not be guaranteed in the case of a byte stream,
- It returns a reference, requiring the returned type to implement
`Clone` if one wants to keep the value for longer than the lifetime of
the slice.
To overcome these when needed, add a `from_bytes_copy` with a default
implementation in the trait. `from_bytes_copy` returns an owned value
that is populated using an unaligned read, removing the lifetime
constraint and making it usable even on non-aligned byte slices.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250826-nova_firmware-v2-1-93566252fe3a@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The two methods added take a slice of bytes and return those bytes in
a specific type. These methods are useful when we need to transform
the stream of bytes into specific type.
Since the `is_aligned` method for pointer types has been stabilized in
`1.79` version and is being used in this patch, I'm enabling the
feature. In this case, using this method is useful to check the
alignment and avoid a giant boilerplate, such as `(foo.as_ptr() as
usize) % core::mem::align_of::<T>() == 0`.
Also add `#[allow(clippy::incompatible_msrv)]` where needed until the
MSRV is updated to `1.79`.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1119
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Christian S. Lima <christiansantoslima21@gmail.com>
Link: https://lore.kernel.org/r/20250824213134.27079-1-christiansantoslima21@gmail.com
Acked-by: Miguel Ojeda <ojeda@kernel.org>
[acourbot@nvidia.com: minor rewording of commit messages and doccomments]
[acourbot@nvidia.com: revert slice implementation removal]
[acourbot@nvidia.com: move incompatible_msrv clippy allow closer to site of need]
[acourbot@nvidia.com: call the doctest method]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Types that implement both `AsBytes` and `FromBytes` can be safely
modified as a slice of bytes. Add a `as_bytes_mut` method for that
purpose.
[acourbot@nvidia.com: use fully qualified `core::mem::size_of_val` to
build with Rust 1.78.]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250801-as_bytes-v5-2-975f87d5dc85@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Every type that implements `AsBytes` should be able to provide its byte
representation. Introduce the `as_bytes` method that returns the
implementer as a stream of bytes, and provide a default implementation
that should be suitable for any type that satisfies `AsBytes`'s safety
requirements.
[acourbot@nvidia.com: use fully qualified `core::mem::size_of_val` to
build with Rust 1.78.]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250801-as_bytes-v5-1-975f87d5dc85@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Falcon DMA transfers are done in 256 bytes increments, and the method
responsible for initiating the transfer checked that the required length
was indeed a multiple of 256. While correct, this also requires callers
to specifically account for this limitation of DMA transfers, and we had
for instance the fwsec code performing a seemingly arbitrary (and
potentially overflowing) upwards alignment of the DMEM load size to
match this requirement.
Let's move that alignment into the loading code itself instead: since it
is working in terms of number of transfers, we can turn this upwards
alignment into a non-overflowing operation, and check that the requested
transfer remains into the limits of the DMA object. This also allows us
to remove a DMA-specific constant in the fwsec code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250821-falcondma_256b-v2-1-83e8647a24b5@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The drm_gpusvm_for_each_notifier, drm_gpusvm_for_each_notifier_safe and
drm_gpusvm_for_each_range_safe macros are useful for locating notifiers
and ranges within a user-specified range. By making these macros public,
we enable broader access and utility for developers who need to leverage
them in their implementations.
v2 (Matthew Brost)
- drop inline __drm_gpusvm_range_find
- /s/notifier_iter_first/drm_gpusvm_notifier_find
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-5-himal.prasad.ghimiray@intel.com
drm-misc-next for v6.18:
UAPI Changes:
- Add DRM_IOCTL_GEM_CHANGE_HANDLE for reassigning GEM handles
- Document DRM_MODE_PAGE_FLIP_EVENT
Cross-subsystem Changes:
fbcon:
- Add missing declarations in fbcon.h
Core Changes:
bridge:
- Fix ref counting
panel:
- Replace and remove mipi_dsi_generic_write_{seq/_chatty}()
sched:
- Fixes
Rust:
- Drop Opaque<> from ioctl arguments
Driver Changes:
amdxdma:
- Support buffers allocated by user space
- Streamline PM interfaces
- Fixes
bridge:
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
gud:
- Fixes
ivpu:
- Fixes
nouveau:
- Use GSP firmware by default
- Fixes
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
panthor:
- Print task/pid on errors
- Fixes
renesas:
- convert to RUNTIME_PM_OPS
repaper:
- Use shadow-plane helpers
rocket:
- Add driver for Rockchip NPU plus DT bindings
sharp-memory:
- Use shadow-plane helpers
simpledrm:
- Use of_reserved_mem_region_to_resource() helper
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
vmwgfx:
- Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250814072454.GA18104@linux.fritz.box
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
Pull rust fixes from Miguel Ojeda:
- Workaround 'rustdoc' target modifiers bug in Rust >= 1.88.0. It will
be fixed in Rust 1.90.0 (expected 2025-09-18).
- Clean 'rustdoc' output before running it to avoid confusing the tool
when files from previous versions remain.
* tag 'rust-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: clean output before running `rustdoc`
rust: workaround `rustdoc` target modifiers bug
Pull ata fixes from Damien Le Moal:
- Fix a regression affecting old IDE/PATA device scan and introduced by
the recent link power management cleanups & fixes. The regression
prevented devices from being properly detected (me)
- Fix command duration limits (CDL) feature control: attempting to
enable the feature while NCQ commands are being executed resulted in
a silent failure to enable CDL when needed (Igor)
* tag 'ata-ata-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix CDL control
ata: libata-eh: Fix link state check for IDE/PATA ports
Pull SCSI fixes from James Bottomley:
"One core change removing the 'w' access flag of attributes that don't
have a set routine (and therefore can't be written to) which should
have no practical impact. The big scsi_debug update is caused by
reformatting lots of arrays and the rest of the bug fixes in drivers
are trivial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove error print for devm_add_action_or_reset()
scsi: ufs: mediatek: Fix out-of-bounds access in MCQ IRQ mapping
scsi: lpfc: Remove redundant assignment to avoid memory leak
scsi: lpfc: Fix wrong function reference in a comment
scsi: ufs: core: Fix interrupt handling for MCQ Mode
scsi: scsi_debug: Make read-only arrays static const
scsi: core: sysfs: Correct sysfs attributes access rights
Pull drm fixes from Dave Airlie:
"Relatively quiet week, usual amdgpu/i915/xe fixes along with a set of
fixes for fbdev format info, which fix some regressions seen in with
rc1.
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
i915:
- Fix the implementation of wa_18038517565 [fbc]
- Do not trigger Frame Change events from frontbuffer flush [psr]
xe:
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)"
* tag 'drm-fixes-2025-08-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/pf: Set VF LMEM BAR size
drm/amdgpu: fix task hang from failed job submission during process kill
drm/amdgpu: fix incorrect vm flags to map bo
drm/amdgpu: fix vram reservation issue
drm/amdgpu: Add PSP fw version check for fw reserve GFX command
drm/xe/hwmon: Add SW clamp for power limits writes
drm/xe: Defer buffer object shrinker write-backs and GPU waits
drm/xe/migrate: prevent potential UAF
drm/xe/migrate: don't overflow max copy size
drm/xe/migrate: prevent infinite recursion
drm/i915/psr: Do not trigger Frame Change events from frontbuffer flush
drm/i915/fbc: fix the implementation of wa_18038517565
drm/panfrost: Print RSS for tiler heap BO's in debugfs GEMS file
drm/radeon: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/nouveau: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/omap: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/bridge: document HDMI CEC callbacks
drm/bridge: Describe the newly introduced drm_connector parameter for drm_bridge_detect
drm/bridge: fix OF node leak
Pull xfs fixes from Carlos Maiolino:
- Fix an assert trigger introduced during the merge window
- Prevent atomic writes to be used with DAX
- Prevent users from using the max_atomic_write mount option without
reflink, as atomic writes > 1block are not supported without reflink
- Fix a null-pointer-deref in a tracepoint
* tag 'xfs-fixes-6.17-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: split xfs_zone_record_blocks
xfs: fix scrub trace with null pointer in quotacheck
xfs: reject max_atomic_write mount option for no reflink
xfs: disallow atomic writes on DAX
fs/dax: Reject IOCB_ATOMIC in dax_iomap_rw()
xfs: remove XFS_IBULK_SAME_AG
xfs: fully decouple XFS_IBULK* flags from XFS_IWALK* flags
xfs: fix frozen file system assert in xfs_trans_alloc
Detecting the monitor for DisplayPort targets is more complicated than
just reading the HPD pin level: it requires reading the DPCD in order to
check what kind of device is attached to the port and whether there is
an actual display attached.
In order to let DRM framework handle such configurations, disable
DRM_BRIDGE_OP_DETECT for dp-connector devices, letting the actual DP
driver perform detection. This still keeps DRM_BRIDGE_OP_HPD enabled, so
it is valid for the bridge to report HPD events.
Currently inside the kernel there are only two targets which list
hpd-gpios for dp-connector devices: arm64/qcom/qcs6490-rb3gen2 and
arm64/qcom/sa8295p-adp. Both should be fine with this change.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250802-dp-conn-no-detect-v1-1-2748c2b946da@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Pull block fixes from Jens Axboe:
- Fix for unprivileged daemons in ublk
- Speedup ublk release by removing unnecessary quiesce
- Fix for blk-wbt, where a regression caused it to not be possible to
enable at runtime
- blk-wbt cleanups
- Kill the page pool from drbd
- Remove redundant __GFP_NOWARN uses in a few spots
- Fix for a kobject double initialization issues
* tag 'block-6.17-20250815' of git://git.kernel.dk/linux:
block: restore default wbt enablement
Docs: admin-guide: Correct spelling mistake
blk-wbt: doc: Update the doc of the wbt_lat_usec interface
blk-wbt: Eliminate ambiguity in the comments of struct rq_wb
blk-wbt: Optimize wbt_done() for non-throttled writes
block: fix kobject double initialization in add_disk
blk-cgroup: remove redundant __GFP_NOWARN
block, bfq: remove redundant __GFP_NOWARN
ublk: check for unprivileged daemon on each I/O fetch
ublk: don't quiesce in ublk_ch_release
drbd: Remove the open-coded page pool
All CPUID call sites were updated at commit:
968e300068 ("x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header")
to include <asm/cpuid/api.h> instead of <asm/cpuid.h>.
The <asm/cpuid.h> header was still retained as a wrapper, just in case
some new code in -next started using it. Now that everything is merged
to Linus' tree, remove the header.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250815070227.19981-2-darwi@linutronix.de
