The new driver incorrectly unwinds after errors, as clang points out:
drivers/dma-buf/st-dma-resv.c:295:7: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (r) {
^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
while (i--)
^
drivers/dma-buf/st-dma-resv.c:295:3: note: remove the 'if' if its condition is always false
if (r) {
^~~~~~~~
drivers/dma-buf/st-dma-resv.c:288:6: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (r) {
^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
while (i--)
^
drivers/dma-buf/st-dma-resv.c:288:2: note: remove the 'if' if its condition is always false
if (r) {
^~~~~~~~
drivers/dma-buf/st-dma-resv.c:280:10: note: initialize the variable 'i' to silence this warning
int r, i;
^
= 0
Skip cleaning up the bits that have not been allocated at this point.
Fixes: 1d51775cd3 ("dma-buf: add dma_resv selftest v4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026083448.3471055-1-arnd@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Since commit 875a4d5368 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.
However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.
Let's make sure we have the HDMI controller properly powered while
disabling it.
Fixes: 875a4d5368 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923185013.826679-1-maxime@cerno.tech
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.
However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.
Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.
Move to a goto-based implementation to have an easier consitency.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.
However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.
Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.
This is effectively a revert of 9c95b32ca0 ("clk: bcm2835: add a round
up ability to the clock divisor").
Fixes: 9c95b32ca0 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
The driver currently tries to pick the closest rate that is lower than
the rate being requested.
This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.
Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.
Fixes: 6d18b8adbe ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
UAPI Changes:
- No Functional change, but a clarification around I915_TILING values (Matt).
Driver Changes:
- Changes around async flip VT-d w/a (Ville)
- Delete bogus NULL check in intel_ddi_encoder_destroy (Dan)
- DP link training improvements and DP per-lane driver settings (Ville)
- Free the returned object of acpi_evaluate_dsm (Zenghui)
- Fixes and improvements around DP's UHBR and MST (Jani)
- refactor plane config + pin out (Dave)
- remove unused include in intel_dsi_vbt.c (Lucas)
- some code clean up (Lucas, Jani)
- gracefully disable dual eDP (Jani)
- Remove memory frequency calculation (Jose)
- Fix oops on platforms w/o hpd support (Ville)
- Clean up PXP Kconfig info (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWnMORrixyw90O3/@intel.com
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective rockchip functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[On rk3288 (pinky), rk3399 (gru-kevin, puma) and rk3328 (rock64)]
Tested-by: Heiko Stuebner <heiko@sntech.de>
[On RK3188/RK3066 (without iommu)]
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095502.8945-1-tzimmermann@suse.de
While the pages can't be swapped out, they can be discarded by the shrinker.
Normally such objects are marked with __I915_MADV_PURGED, which can't be
unset, and therefore requires a new object. For kernel internal objects
this is not true, since the madv hint is reset for our special volatile
objects, such that we can re-acquire new pages, if so desired, without
needing a new object. As a result we should probably be paranoid here
and put the object back into the CPU domain when discarding the pages,
and also correctly set cache_dirty, if required.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-8-matthew.auld@intel.com
