[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recently debugging efforts have involved setting/checking the
X.Y value used during payload allocation. Current output for
Y was calculated with incorrect bitshift. Y value is also not
human readable.
[How]
Refactor logging into separate function. Fix Y calculation error
and format output to be human readable.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a chance verified link cap can be greater than max link cap.
This causes software hang because we cannot power up PHY with link rate
that cannot handle.
The change is to guard verfieid link cap from becoming larger than max link cap
our PHy can support.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Blnd, 3dlut, and shaper LUT select registers are double buffered, however
their accompanying LUT memory shutdown registers are not. As a result,
shutting down LUT memory immediately after setting a block to bypass causes
corruption as bypass only happens at next Vupdate.
[HOW]
Re-enable mem low power for CM block
Force optimization on next flip and disable LUT memory during optimization
sequence if LUT select field is then set to bypass
v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex)
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fixes to backlight, LUT, PPS, MST
- Use correct vpg for 128b/132b encoding
- Improved logging for VCP
- Replace referral of dal with dc
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change is needed for DCN2 to make use of the immediate_update
flag. With this flag, update to PPS will be immediate, rather than
always taking place on dig_update signal.
[How]
Set AFMT_GENERIC7_FRAME/IMMEDIATE_UPDATE bits depending on flag
value.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Ilya <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MST streams share the same link and should share the same encoder.
The current availability check may erroneously determine that an
encoder is unavailable for MST streams.
[How]
When checking for link encoder availability, check if an encoder
in use shares a link with the stream for which the availability
check is being conducted. If the link is shared, then the link
encoder should be shared too and will be deemed available.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Requested feature to assist with Thermal, Acoustic, Power, and
Performance tuning.
[How]
Add a debug field that will override calculated minimum DRAM clock,
if the debug value is larger than the calculate value.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR
enabled, driver will notify DMCUB to stop ABM's vertical interrupts
if vsync is disabled and steady state is reached.
[How]
Send inbox message to notify ABM pause based on vsync on/off
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
AFMT is unused for DP audio, so powering it on for DP is unnecessary.
[HOW]
APG block should be powered down instead, however HW defaults to shutdown
state when not enabled so no further work is required.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
128b/132b uses the vpg instance assigned to hpo dp stream encoder.
The current vpg used is assigned to dio stream encoder.
This is incorrect and cause display black screen because the
actual vpg is powered off.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, umc uncorrectable error will be ignored until
the corrupted data consumed by another ras module (such as gfx, sdma).
v2: update the debug message and replace dev_warn with dev_info.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RAS poison supported flag and tell PSP RAS TA about the info.
v2: rename poison mode to poison supported, we can also disable poison
mode even we support it.
print value of poison supported if ras feature enablement fails.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.
[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.
For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f3703f ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").
Bug:https://gitlab.freedesktop.org/drm/amd/-/issues/1698
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev->rmmio is set to be NULL in amdgpu_device_unmap_mmio to prevent
access after pci_remove, however, in SRIOV case, amdgpu_virt_release_full_gpu
will still use adev->rmmio for access after amdgpu_device_unmap_mmio.
The patch is to move such SRIOV calling earlier to fini_early stage.
Fixes: 07775fc138 ("drm/amdgpu: Unmap all MMIO mappings")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the 32bit kernel build fails due to an incorrect string
format specifier. ARRAY_SIZE() returns size_t type as it uses sizeof().
However, we specify it in a string as %ld. This causes a compiler error
and causes the 32bit build to fail.
[How]
Change the %ld to %zu as size_t (which sizeof() returns) is an unsigned
integer data type. We use 'z' to ensure it also works with 64bit build.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hayden Goodfellow <Hayden.Goodfellow@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new DC version brings improvements in the following areas:
- New firmware version
- Fix HPD problems on DCN2
- Fix generic encoder problems and null deferences
- Adjust DCN301 watermark
- Rework dynamic bpp for DCN3x
- Improve link training fallback logic
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used.
[How]
Make sure RDPCSPIPE registers are programmed correctly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Screen sometimes would have artifacts or blink once at the time when bpp
is dynamically changed.
How:
1. Changed to update PPS infopacket in frame mode instead of immediate mode
since other updates for bpp change are double-buffered.
2. Changed double-buffering enablement programming for DCN30 as advised by
ASIC team
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If DCN30 watermark calc is used for DCN301, the calculated values are
wrong due to the data structure mismatch between DCN30 and DCN301.
However, using the original DCN301 watermark values causes underflow.
[how]
- Add DCN21-style watermark calculations
- Adjust DCN301 watermark values to remove the underflow
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lost power down on boot and power down for DCN3.
[How]
Added power down on boot and power down for DCN3.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
