Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Fixes: 4a992bbd36 ("mctp: Implement message fragmentation & reassembly")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241218-mctp-next-v2-1-1c1729645eaa@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87 ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following series contains two fixes for Netfilter/IPVS:
1) Possible build failure in IPVS on systems with less than 512MB
memory due to incorrect use of clamp(), from David Laight.
2) Fix bogus lockdep nesting splat with ipset list:set type,
from Phil Sutter.
netfilter pull request 24-12-19
* tag 'nf-24-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
====================
Link: https://patch.msgid.link/20241218234137.1687288-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd3 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd3 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Reported-by: Robert Hodaszi <robert.hodaszi@digi.com>
Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
idpf: trigger SW interrupt when exiting wb_on_itr mode
Joshua Hay says:
This patch series introduces SW triggered interrupt support for idpf,
then uses said interrupt to fix a race condition between completion
writebacks and re-enabling interrupts.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
====================
Link: https://patch.msgid.link/20241217225715.4005644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2024-12-18
There are 2 patches by Matthias Schiffer for the m_can_pci driver that
handles the m_can cores found on the Intel Elkhart Lake processor.
They fix the initialization and the interrupt handling under high CAN
bus load.
* tag 'linux-can-fixes-for-6.13-20241218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
====================
Link: https://patch.msgid.link/20241218121722.2311963-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gcc runs into undefined behavior at the end of the three led_polarity_set()
callback functions if it were called with a zero 'modes' argument and it
just ends the function there without returning from it.
This gets flagged by 'objtool' as a function that continues on
to the next one:
drivers/net/phy/aquantia/aquantia_leds.o: warning: objtool: aqr_phy_led_polarity_set+0xf: can't find jump dest instruction at .text+0x5d9
drivers/net/phy/intel-xway.o: warning: objtool: xway_gphy_led_polarity_set() falls through to next function xway_gphy_config_init()
drivers/net/phy/mxl-gpy.o: warning: objtool: gpy_led_polarity_set() falls through to next function gpy_led_hw_control_get()
There is no point to micro-optimize the behavior here to save a single-digit
number of bytes in the kernel, so just change this to a "return -EINVAL"
as we do when any unexpected bits are set.
Fixes: 1758af47b9 ("net: phy: intel-xway: add support for PHY LEDs")
Fixes: 9d55e68b19 ("net: phy: aquantia: correctly describe LED polarity override")
Fixes: eb89c79c1b ("net: phy: mxl-gpy: correctly describe LED polarity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241217081056.238792-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYsT34UkGFKxus63H6UVpYi5GRZkezT9MRLfAbM3f6ke0g@mail.gmail.com/
Fixes: 4f325e2627 ("ipvs: dynamically limit the connection hash table")
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The interrupt line of PCI devices is interpreted as edge-triggered,
however the interrupt signal of the m_can controller integrated in Intel
Elkhart Lake CPUs appears to be generated level-triggered.
Consider the following sequence of events:
- IR register is read, interrupt X is set
- A new interrupt Y is triggered in the m_can controller
- IR register is written to acknowledge interrupt X. Y remains set in IR
As at no point in this sequence no interrupt flag is set in IR, the
m_can interrupt line will never become deasserted, and no edge will ever
be observed to trigger another run of the ISR. This was observed to
result in the TX queue of the EHL m_can to get stuck under high load,
because frames were queued to the hardware in m_can_start_xmit(), but
m_can_finish_tx() was never run to account for their successful
transmission.
On an Elkhart Lake based board with the two CAN interfaces connected to
each other, the following script can reproduce the issue:
ip link set can0 up type can bitrate 1000000
ip link set can1 up type can bitrate 1000000
cangen can0 -g 2 -I 000 -L 8 &
cangen can0 -g 2 -I 001 -L 8 &
cangen can0 -g 2 -I 002 -L 8 &
cangen can0 -g 2 -I 003 -L 8 &
cangen can0 -g 2 -I 004 -L 8 &
cangen can0 -g 2 -I 005 -L 8 &
cangen can0 -g 2 -I 006 -L 8 &
cangen can0 -g 2 -I 007 -L 8 &
cangen can1 -g 2 -I 100 -L 8 &
cangen can1 -g 2 -I 101 -L 8 &
cangen can1 -g 2 -I 102 -L 8 &
cangen can1 -g 2 -I 103 -L 8 &
cangen can1 -g 2 -I 104 -L 8 &
cangen can1 -g 2 -I 105 -L 8 &
cangen can1 -g 2 -I 106 -L 8 &
cangen can1 -g 2 -I 107 -L 8 &
stress-ng --matrix 0 &
To fix the issue, repeatedly read and acknowledge interrupts at the
start of the ISR until no interrupt flags are set, so the next incoming
interrupt will also result in an edge on the interrupt line.
While we have received a report that even with this patch, the TX queue
can become stuck under certain (currently unknown) circumstances on the
Elkhart Lake, this patch completely fixes the issue with the above
reproducer, and it is unclear whether the remaining issue has a similar
cause at all.
Fixes: cab7ffc032 ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/fdf0439c51bcb3a46c21e9fb21c7f1d06363be84.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
Fixes: cd5a46ce6f ("can: m_can: don't enable transceiver when probing")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There is a race condition between exiting wb_on_itr and completion write
backs. For example, we are in wb_on_itr mode and a Tx completion is
generated by HW, ready to be written back, as we are re-enabling
interrupts:
HW SW
| |
| | idpf_tx_splitq_clean_all
| | napi_complete_done
| |
| tx_completion_wb | idpf_vport_intr_update_itr_ena_irq
That tx_completion_wb happens before the vector is fully re-enabled.
Continuing with this example, it is a UDP stream and the
tx_completion_wb is the last one in the flow (there are no rx packets).
Because the HW generated the completion before the interrupt is fully
enabled, the HW will not fire the interrupt once the timer expires and
the write back will not happen. NAPI poll won't be called. We have
indicated we're back in interrupt mode but nothing else will trigger the
interrupt. Therefore, the completion goes unprocessed, triggering a Tx
timeout.
To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr.
This interrupt will catch the rogue completion and avoid the timeout.
Add logic to set the appropriate bits in the vector's dyn_ctl register.
Fixes: 9c4a27da0e ("idpf: enable WB_ON_ITR")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
SW triggered interrupts are guaranteed to fire after their timer
expires, unlike Tx and Rx interrupts which will only fire after the
timer expires _and_ a descriptor write back is available to be processed
by the driver.
Add the necessary fields, defines, and initializations to enable a SW
triggered interrupt in the vector's dyn_ctl register.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Parthiban Veerasooran says:
====================
Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
This patch series contain the below fixes.
- Infinite loop error when tx credits becomes 0.
- Race condition between tx skb reference pointers.
v2:
- Added mutex lock to protect tx skb reference handling.
v3:
- Added mutex protection in assigning new tx skb to waiting_tx_skb
pointer.
- Explained the possible scenario for the race condition with the time
diagram in the commit message.
v4:
- Replaced mutex with spin_lock_bh() variants as the start_xmit runs in
BH/softirq context which can't take sleeping locks.
====================
Link: https://patch.msgid.link/20241213123159.439739-1-parthiban.veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
netdev: fix repeated netlink messages in queue dumps
Fix dump continuation for queues and queue stats in the netdev family.
Because we used post-increment when saving id of dumped queue next
skb would re-dump the already dumped queue.
====================
Link: https://patch.msgid.link/20241213152244.3080955-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da7 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangguan Wang says:
====================
net: several fixes for smc
v1 -> v2:
rewrite patch #2 suggested by Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccaf ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
