Implement sdca_asoc_pde_ensure_ps() helper function to poll for PDE
power state transitions. Per SDCA specification, after writing
REQUESTED_PS, drivers must poll ACTUAL_PS until the target power state
is reached.
Changes include:
- Add sdca_asoc_pde_ensure_ps() to handle ACTUAL_PS polling with
support for device-specific delay tables or default intervals
- Export function via sdca_asoc.h for use by SDCA-compliant drivers
- Refactor entity_pde_event() in sdca_asoc.c to use the helper
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-2-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add per-stream fade controls for the Tegra mixer to allow
independently configuring target gain and fade duration for each of
the 10 input streams (RX1 through RX10).
The following controls are added per stream:
"RXn Fade Duration" - fade duration in samples (N3 parameter)
"RXn Fade Gain" - target gain level for fade
A strobe control commits all pending fade configurations:
"Fade Switch" - 1 = apply staged gain/duration and start fades
0 = disable sample count for all fading streams
A read-only status control reports per-stream fade state:
"Fade Status" - per-stream state for all 10 RX inputs
0 = idle, 1 = active
Usage example (fade 2 streams simultaneously):
amixer -c <card> cset name="RX1 Fade Duration" 1024
amixer -c <card> cset name="RX1 Fade Gain" 12000
amixer -c <card> cset name="RX2 Fade Duration" 2048
amixer -c <card> cset name="RX2 Fade Gain" 15000
amixer -c <card> cset name="Fade Switch" 1
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260506102032.1644851-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no remaining static platform_device users of pxa2xx ac97,
so the rest of that code path can go away as well.
Since nothing in the driver uses the gpio number now, constrain the use
of the legacy gpio interface to the architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm_adsp_fw_find_test_find_firmware_byindex() the content of
priv->searched_fw_files must be cleared before starting the next iteration.
The files searched for are appended to priv->searched_fw_files, so if it is
not cleared on each iteration it will still contain the searches from the
previous iteration.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Redirect wm_adsp_release_firmware_files() to a replacement function that
handles the dummy firmware created by the tests. Use the same cleanup
function to cleanup in the test exit() function. Also call it on each
loop in wm_adsp_fw_find_test_find_firmware_byindex() to free the created
strings before reusing priv->found_fw on the next loop.
wm_adsp_release_firmware_files() will pass the struct firmware* pointers
to release_firmware(). But the pointers created by the tests are dummies
and must not be passed to release_firmware().
The test never invokes wm_adsp_release_firmware_files() so it wasn't
redirected. But the error handling in wm_adsp_request_firmware_files()
calls wm_adsp_release_firmware_files(). The redirected function makes
this safe.
Using the same cleanup function to perform cleanup from the test exit()
handler and wm_adsp_fw_find_test_find_firmware_byindex() avoids the risk
of duplicate cleanup code that all needs updating if there is any change
to the cleanup requirements.
This problem was found by https://sashiko.dev.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Closes: https://sashiko.dev/#/patchset/20260326100853.1582886-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the MT2701/MT7623N AFE driver with the HDMI playback path:
- a new HDMI DMA memif (MT2701_MEMIF_HDMI) mapped to the
AFE_HDMI_OUT_{CON0,BASE,CUR,END} registers;
- a PCM_HDMI front-end DAI (S16_LE only, 44.1k/48k) which feeds
the memif via DPCM;
- an HDMI BE DAI wrapping the AFE_8CH_I2S_OUT_CON engine that
serialises L/R samples towards the on-chip HDMI transmitter.
Sample-rate programming uses the empirically determined
HDMI_BCK_DIV = 45 * 48000 / rate - 1 formula in AUDIO_TOP_CON3,
which covers 44.1 kHz and 48 kHz within the 6-bit divider range.
The AFE_HDMI_CONN0 interconnect is programmed to route memif
output pairs to the serializer inputs with L/R in the right order
for hdmi-audio-codec.
The existing I2S engine helpers (mt2701_mclk_configuration,
mt2701_i2s_path_enable, mt2701_afe_i2s_path_disable) are reused
for the HDMI BE so that MCLK at 128*fs and the ASYS I2S3 FS field
are programmed and cleanly released across open/close cycles.
Only S16_LE and 44.1k/48k are exposed to userspace. Other rates
fall outside the 6-bit BCK divider range, and wider sample
formats require DMA BIT_WIDTH programming that the current memif
setup does not handle. These limits match what the MT8173 AFE
driver exposes for its HDMI path.
The HDMI-related AFE registers (AUDIO_TOP_CON3, AFE_HDMI_OUT_CON0,
AFE_HDMI_CONN0, AFE_8CH_I2S_OUT_CON) are added to the suspend
backup list so that the existing mtk_afe_suspend/resume framework
saves and restores them across system sleep cycles.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a580d6d676bcdba3d8bad94bb3bcb91a336bf1ba.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI audio output path on MT2701/MT7623N is rooted in HADDS2PLL
and gated by the audio_hdmi, audio_spdf and audio_apll power gates.
Acquire these four clocks from device tree using devm_clk_get_optional
so that existing platforms which do not wire up HDMI audio keep
probing unchanged. Actual clock enable/prepare is deferred to the
upcoming HDMI DAI startup path.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/5e24890acf597b04485145b5056ad8b161b4cbda.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add register offsets and bit defines for the MT2701/MT7623N AFE
HDMI audio output path: the HDMI BCK divider in AUDIO_TOP_CON3,
the HDMI output memif control and descriptor registers, the 8-bit
AFE_HDMI_CONN0 interconnect, and the AFE_8CH_I2S_OUT_CON engine
that drives the HDMI TX serial link. These are a prerequisite for
adding an HDMI playback path to the mt2701 AFE driver and have no
behavioural effect on their own.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2c2a2e3e5d01da4a130160f5d5ffbd2a3808fe12.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax <ckeepax@opensource.cirrus.com> says:
There are some short comings of the current SDCA class driver with
respect to duplicated functions and jacks. Fix some issues in the
reporting of jacks when there are multiple jacks represented in the SDCA
topology. When a single device contains multiple instances of the same
type of SDCA function the current class driver will create duplicate
controls, update the code to fix this. Finally whilst working through
this also tidy up the handling of the sdca_function_desc pointers as it
turns out some duplication has crept into the code on that front.
It is possible that SDCAs devices might have multiple functions of
the same type, as the entity names within a function are defined by
the specification it is very likely such a device will have duplicate
entities. This causes problems where DAIs and ALSA controls end up
with clashing names.
This can be handled by adding the function address into the names to
ensure uniqueness, although, ideally this would have been included from
the start. User-space already has UCM using the current control names,
so as a compromise the first function of a given type will use the
raw entity names, then duplicates will get an added function address.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430150931.2025953-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The class driver internally has an array of sdca_function_data pointers
that it uses to store the parsed DisCo data. However, there is already
an sdca_function_data attached to the auxdev device. It makes more sense
to use the one already provided in the auxdev device, as it could also
be used by custom drivers for parts that require those.
Using the auxdev copy also prevents the need for the class function
drivers to search through the array for the correct data, which
currently is based off matching the function type. This has problems
when two functions have the same type as the current code will find the
same data for both drivers, using the auxdev copy of the data avoids
this problem.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430150931.2025953-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, all SDCA jacks simply report against a mask of 0xFFFF. This
works fine for system with a single SDCA jack control as the status
reflects that single control at all times. However, if two SDCA
jack controls exist in the system, such as a separate representation for
input and output, then the second control can cancel reports from the
other since it will only report its relevant bits and zero in all other
slots. This is exactly what the mask is for.
Build up a mask using all the possible states for an SCDA jack control
at registration time and use that mask when reporting a particular jack.
It is worth noting this still doesn't handle cases such as two headphone
jacks as that would require separate ALSA jacks to report to.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430150931.2025953-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
phucduc.bui@gmail.com <phucduc.bui@gmail.com> says:
This series converts spin lock handling in UniPhier AIO drivers
to use guard() helpers.
The changes are purely code cleanups with no functional impact.
Consolidate the allocations for capture_dma_data and playback_dma_data
into a single kzalloc by using a flexible array member at the end of
the tegra_admaif struct. This reduces the number of allocations from
three to one, simplifies error handling, and improves memory locality.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260503003037.11942-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull sh fix from John Paul Adrian Glaubitz:
"The ZERO_PAGE consolidation in v7.1, introduced a regression on sh
which made these systems unbootable.
The problem was that on sh, the initial boot parameters were
previously referenced as an array and after 6215d9f447 ("arch, mm:
consolidate empty_zero_page"), they were referenced as a pointer which
caused wrong code generation and boot hang.
This changes the declaration back to being an array which fixes the
boot hang"
* tag 'sh-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: Fix fallout from ZERO_PAGE consolidation
Pull slab fixes from Vlastimil Babka:
- Stable fixes for CONFIG_SMP=n where _nolock() allocations in NMI both
at kmalloc and page allocator levels are not properly protected by
the spin_trylock() semantics on !SMP (Harry Yoo)
* tag 'slab-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP
Pull locking fix from Ingo Molnar:
"Fix lockup in requeue-PI during signal/timeout wakeups, by Sebastian
Andrzej Siewior"
* tag 'locking-urgent-2026-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
Pull scheduler fixes from Ingo Molnar:
- Fix the delayed dequeue negative lag increase fix in the
fair scheduler (Peter Zijlstra)
- Fix wakeup_preempt_fair() to do proper delayed dequeue
(Vincent Guittot)
- Clear sched_entity::rel_deadline when initializing
forked entities, which bug can cause all tasks to be
EEVDF-ineligible, causing a NULL pointer dereference
crash in pick_next_entity() (Zicheng Qu)
* tag 'sched-urgent-2026-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Clear rel_deadline when initializing forked entities
sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue
sched/fair: Fix the negative lag increase fix
Consolidation of empty_zero_page declarations broke boot on sh.
sh stores its initial boot parameters in a page reserved in
arch/sh/kernel/head_32.S. Before commit 6215d9f447 ("arch, mm:
consolidate empty_zero_page") this page was referenced in C code
as an array and after that commit it is referenced as a pointer.
This causes wrong code generation and boot hang.
Declare boot_params_page as an array to fix the issue.
Reported-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Fixes: 6215d9f447 ("arch, mm: consolidate empty_zero_page")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Pull crypto fix from Herbert Xu:
- Reject algorithms with authsizes that are too short in authencesn
* tag 'v7.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: authencesn - reject short ahash digests during instance creation
Pull ntfs fixes from Namjae Jeon:
- Fix a NULL pointer dereference in ntfs_index_walk_down() by
validating index block allocation
- Fix a memory leak of the symlink target string in
ntfs_reparse_set_wsl_symlink() during error paths
- Prevent VCN overflow and validate lowest_vcn in
ntfs_mapping_pairs_decompress() to avoid runlist corruption
- Fix a page reference leak in ntfs_write_iomap_end_resident()
when attribute search context allocation fails
- Fix an invalid PTR_ERR() usage on a valid folio pointer in
__ntfs_bitmap_set_bits_in_run()
- Correct directory link counting by dropping nlink only when
the MFT record link count reaches zero for WIN32/DOS aliases
- Fix an uninitialized variable in ntfs_mapping_pairs_decompress()
by returning an error pointer directly
* tag 'ntfs-for-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: Use return instead of goto in ntfs_mapping_pairs_decompress()
ntfs: drop nlink once for WIN32/DOS aliases
ntfs: fix invalid PTR_ERR() usage in __ntfs_bitmap_set_bits_in_run()
ntfs: fix error handling in ntfs_write_iomap_end_resident()
ntfs: fix VCN overflow in ntfs_mapping_pairs_decompress()
ntfs: fix WSL symlink target leak on reparse failure
ntfs: fix NULL dereference in ntfs_index_walk_down()
Pull drm fixes from Dave Airlie:
"Fixes for rc2, the usual amdgpu/xe double header, I think xe had a
couple of weeks combined due to some maintainer access issues,
otherwise there's just a few misc fixes and documentation fixups.
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout"
* tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel: (77 commits)
drm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRROR
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
drm/xe/xelp: Fix Wa_18022495364
drm/xe/gsc: Fix BO leak on error in query_compatibility_version()
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
drm/xe/vf: Use drm mm instead of drm sa for CCS read/write
drm/xe: Add memory pool with shadow support
drm/xe/debugfs: Correct printing of register whitelist ranges
drm/xe: Mark ROW_CHICKEN5 as a masked register
drm/xe/tuning: Use proper register offset for GAMSTLB_CTRL
drm/xe/xe3p_lpg: Add missing indirect ring state feature flag
drm/xe: Drop redundant rtp entries for Wa_14019988906 & Wa_14019877138
drm/xe/vm: Add missing pad and extensions check
drm/xe: Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge()
...
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
