Allocate PAGE_KERNEL_READ_EXEC(read only, executable) page for kprobes
insn page. This is to prepare for STRICT_MODULE_RWX.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Constify the sbi_ipi_ops so that it will be placed in the .rodata
section. This will cause attempts to modify it to fail when strict
page permissions are in place.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Constify the sys_call_table so that it will be placed in the .rodata
section. This will cause attempts to modify the table to fail when
strict page permissions are in place.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All of these are never modified after init, so they can be
__ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
They are not needed after booting, so mark them as __init to move them
to the __init section.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is a preparatory patch for sv48 support that will introduce
dynamic PAGE_OFFSET.
Dynamic PAGE_OFFSET implies that all zones (vmalloc, vmemmap, fixaddr...)
whose addresses depend on PAGE_OFFSET become dynamic and can't be used
to statically initialize the array used by ptdump to identify the
different zones of the vm layout.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This new document presents the RISC-V virtual memory layout and is based
one the x86 one: it describes the different limits of the different regions
of the virtual address space.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is a preparatory patch for relocatable kernel and sv48 support.
The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.
The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.
In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
clang prior to 13.0.0 does not support -fpatchable-function-entry for
RISC-V.
clang: error: unsupported option '-fpatchable-function-entry=8' for target 'riscv64-unknown-linux-gnu'
To avoid this error, only select HAVE_DYNAMIC_FTRACE when this option is
not available.
Fixes: afc76b8b80 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")
Link: https://github.com/ClangBuiltLinux/linux/issues/1268
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When linking with clang, there are a couple of warnings about flags that
will not be used during the link:
clang-12: warning: argument unused during compilation: '-no-pie' [-Wunused-command-line-argument]
clang-12: warning: argument unused during compilation: '-pg' [-Wunused-command-line-argument]
'-no-pie' was added in commit 85602bea29 ("RISC-V: build vdso-dummy.o
with -no-pie") to override '-pie' getting added to the ld command from
distribution versions of GCC that enable PIE by default. It is
technically no longer needed after commit c2c81bb2f6 ("RISC-V: Fix the
VDSO symbol generaton for binutils-2.35+"), which removed vdso-dummy.o
in favor of generating vdso-syms.S from vdso.so with $(NM) but this also
resolves the issue in case it ever comes back due to having full control
over the $(LD) command. '-pg' is for function tracing, it is not used
during linking as clang states.
These flags could be removed/filtered to fix the warnings but it is
easier to just match the rest of the kernel and use $(LD) directly for
linking. See commits
fe00e50b2d ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
for more information.
The flags are converted to linker flags and '--eh-frame-hdr' is added to
match what is added by GCC implicitly, which can be seen by adding '-v'
to GCC's invocation.
Additionally, since this area is being modified, use the $(OBJCOPY)
variable instead of an open coded $(CROSS_COMPILE)objcopy so that the
user's choice of objcopy binary is respected.
Link: https://github.com/ClangBuiltLinux/linux/issues/803
Link: https://github.com/ClangBuiltLinux/linux/issues/970
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add sign extension to the $badaddr before addressing the instruction page
fault and instruction access fault to workaround the issue "cip-453".
To avoid affecting the existing code sequence, this patch will creates two
trampolines to add sign extension to the $badaddr. By the "alternative"
mechanism, these two trampolines will replace the original exception
handler of instruction page fault and instruction access fault in the
excp_vect_table. In this case, only the specific SiFive CPU core jumps to
the do_page_fault and do_trap_insn_fault through these two trampolines.
Other CPUs are not affected.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Introduce the "alternative" mechanism from ARM64 and x86 to apply the CPU
vendors' errata solution at runtime. The main purpose of this patch is
to provide a framework. Therefore, the implementation is quite basic for
now so that some scenarios could not use this schemei, such as patching
code to a module, relocating the patching code and heterogeneous CPU
topology.
Users could use the macro ALTERNATIVE to apply an errata to the existing
code flow. In the macro ALTERNATIVE, users need to specify the manufacturer
information(vendorid, archid, and impid) for this errata. Therefore, kernel
will know this errata is suitable for which CPU core. During the booting
procedure, kernel will select the errata required by the CPU core and then
patch it. It means that the kernel only applies the errata to the specified
CPU core. In this case, the vendor's errata does not affect each other at
runtime. The above patching procedure only occurs during the booting phase,
so we only take the overhead of the "alternative" mechanism once.
This "alternative" mechanism is enabled by default to ensure that all
required errata will be applied. However, users can disable this feature by
the Kconfig "CONFIG_RISCV_ERRATA_ALTERNATIVE".
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When KASAN vmalloc region is populated, there is no userspace process and
the page table in use is swapper_pg_dir, so there is no need to read
SATP. Then we can use the same scheme used by kasan_populate_p*d
functions to go through the page table, which harmonizes the code.
In addition, make use of set_pgd that goes through all unused page table
levels, contrary to p*d_populate functions, which makes this function work
whatever the number of page table levels.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The sbi_init() already prints SBI version before detecting
various SBI extensions so we don't need to print SBI version
for all detected SBI extensions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When percpu-timers are stopped by deep power saving mode, we
need system timer help to broadcast IPI_TIMER.
This is first introduced by broken x86 hardware, where the local apic
timer stops in C3 state. But many other architectures(powerpc, mips,
arm, hexagon, openrisc, sh) have supported the infrastructure to
deal with Power Management issues.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
FORTIFY_SOURCE could detect various overflows at compile and run time.
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
run with CONFIG_FORTIFY_SOURCE. Select it in RISCV.
See more about this feature from commit 6974f0c455
("include/linux/string.h: add the option of fortified string.h functions").
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The riscv [rv32_]defconfig enabled CONFIG_MEMTEST,
but memtest feature is not supported in RISCV.
Add early_memtest() to support for memtest.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull rdma fixes from Jason Gunthorpe:
"Nothing special here, though Bob's regression fixes for rxe would have
made it before the rc cycle had there not been such strong winter
weather!
- Fix corner cases in the rxe reference counting cleanup that are
causing regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
RDMA/rxe: Fix missed IB reference counting in loopback
RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
RDMA/mlx5: Set correct kernel-doc identifier
IB/mlx5: Add missing error code
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
Pull block fixes from Jens Axboe:
- NVMe fixes:
- more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
Terjan)
- fix a hwmon error return (Daniel Wagner)
- fix the keep alive timeout initialization (Martin George)
- ensure the model_number can't be changed on a used subsystem
(Max Gurtovoy)
- rsxx missing -EFAULT on copy_to_user() failure (Dan)
- rsxx remove unused linux.h include (Tian)
- kill unused RQF_SORTED (Jean)
- updated outdated BFQ comments (Joseph)
- revert work-around commit for bd_size_lock, since we removed the
offending user in this merge window (Damien)
* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
nvmet: model_number must be immutable once set
nvme-fabrics: fix kato initialization
nvme-hwmon: Return error code when registration fails
nvme-pci: add quirks for Lexar 256GB SSD
nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
rsxx: Return -EFAULT if copy_to_user() fails
block/bfq: update comments and default value in docs for fifo_expire
rsxx: remove unused including <linux/version.h>
block: Drop leftover references to RQF_SORTED
block: revert "block: fix bd_size_lock use"
Pull io_uring fixes from Jens Axboe:
"A bit of a mix between fallout from the worker change, cleanups and
reductions now possible from that change, and fixes in general. In
detail:
- Fully serialize manager and worker creation, fixing races due to
that.
- Clean up some naming that had gone stale.
- SQPOLL fixes.
- Fix race condition around task_work rework that went into this
merge window.
- Implement unshare. Used for when the original task does unshare(2)
or setuid/seteuid and friends, drops the original workers and forks
new ones.
- Drop the only remaining piece of state shuffling we had left, which
was cred. Move it into issue instead, and we can drop all of that
code too.
- Kill f_op->flush() usage. That was such a nasty hack that we had
out of necessity, we no longer need it.
- Following from ->flush() removal, we can also drop various bits of
ctx state related to SQPOLL and cancelations.
- Fix an issue with IOPOLL retry, which originally was fallout from a
filemap change (removing iov_iter_revert()), but uncovered an issue
with iovec re-import too late.
- Fix an issue with system suspend.
- Use xchg() for fallback work, instead of cmpxchg().
- Properly destroy io-wq on exec.
- Add create_io_thread() core helper, and use that in io-wq and
io_uring. This allows us to remove various silly completion events
related to thread setup.
- A few error handling fixes.
This should be the grunt of fixes necessary for the new workers, next
week should be quieter. We've got a pending series from Pavel on
cancelations, and how tasks and rings are indexed. Outside of that,
should just be minor fixes. Even with these fixes, we're still killing
a net ~80 lines"
* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
io_uring: don't restrict issue_flags for io_openat
io_uring: make SQPOLL thread parking saner
io-wq: kill hashed waitqueue before manager exits
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
io_uring: don't keep looping for more events if we can't flush overflow
io_uring: move to using create_io_thread()
kernel: provide create_io_thread() helper
io_uring: reliably cancel linked timeouts
io_uring: cancel-match based on flags
io-wq: ensure all pending work is canceled on exit
io_uring: ensure that threads freeze on suspend
io_uring: remove extra in_idle wake up
io_uring: inline __io_queue_async_work()
io_uring: inline io_req_clean_work()
io_uring: choose right tctx->io_wq for try cancel
io_uring: fix -EAGAIN retry with IOPOLL
io-wq: fix error path leak of buffered write hash map
io_uring: remove sqo_task
io_uring: kill sqo_dead and sqo submission halting
io_uring: ignore double poll add on the same waitqueue head
...
Pull power management fixes from Rafael Wysocki:
"These fix the usage of device links in the runtime PM core code and
update the DTPM (Dynamic Thermal Power Management) feature added
recently.
Specifics:
- Make the runtime PM core code avoid attempting to suspend supplier
devices before updating the PM-runtime status of a consumer to
'suspended' (Rafael Wysocki).
- Fix DTPM (Dynamic Thermal Power Management) root node
initialization and label that feature as EXPERIMENTAL in Kconfig
(Daniel Lezcano)"
* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap/drivers/dtpm: Add the experimental label to the option description
powercap/drivers/dtpm: Fix root node initialization
PM: runtime: Update device status before letting suppliers suspend
Pull ACPI fix from Rafael Wysocki:
"Make the empty stubs of some helper functions used when CONFIG_ACPI is
not set actually match those functions (Andy Shevchenko)"
* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Constify is_acpi_node() and friends (part 2)
Pull iommu fixes from Joerg Roedel:
- Fix a sleeping-while-atomic issue in the AMD IOMMU code
- Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
driver
- Fix status code definitions for Intel VT-d
- Fix IO Page Fault issue in Tegra IOMMU driver
* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix status code for Allocate/Free PASID command
iommu: Don't use lazy flush for untrusted device
iommu/tegra-smmu: Fix mc errors on tegra124-nyan
iommu/amd: Fix sleeping in atomic in increase_address_space()
Pull btrfs fixes from David Sterba:
"More regression fixes and stabilization.
Regressions:
- zoned mode
- count zone sizes in wider int types
- fix space accounting for read-only block groups
- subpage: fix page tail zeroing
Fixes:
- fix spurious warning when remounting with free space tree
- fix warning when creating a directory with smack enabled
- ioctl checks for qgroup inheritance when creating a snapshot
- qgroup
- fix missing unlock on error path in zero range
- fix amount of released reservation on error
- fix flushing from unsafe context with open transaction,
potentially deadlocking
- minor build warning fixes"
* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: do not account freed region of read-only block group as zone_unusable
btrfs: zoned: use sector_t for zone sectors
btrfs: subpage: fix the false data csum mismatch error
btrfs: fix warning when creating a directory with smack enabled
btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
btrfs: export and rename qgroup_reserve_meta
btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
btrfs: fix spurious free_space_tree remount warning
btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
btrfs: ref-verify: use 'inline void' keyword ordering
Pull devicetree fixes from Rob Herring:
- Another batch of graph and video-interfaces schema conversions
- Drop DT header symlink for dropped C6X arch
- Fix bcm2711-hdmi schema error
* tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: media: Use graph and video-interfaces schemas, round 2
dts: drop dangling c6x symlink
dt-bindings: bcm2711-hdmi: Fix broken schema
Pull tracing fixes from Steven Rostedt:
"Functional fixes:
- Fix big endian conversion for arm64 in recordmcount processing
- Fix timestamp corruption in ring buffer on discarding events
- Fix memory leak in __create_synth_event()
- Skip selftests if tracing is disabled as it will cause them to
fail.
Non-functional fixes:
- Fix help text in Kconfig
- Remove duplicate prototype for trace_empty()
- Fix stale comment about the trace_event_call flags.
Self test update:
- Add more information to the validation output of when a corrupt
timestamp is found in the ring buffer, and also trigger a warning
to make sure that tests catch it"
* tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix comment about the trace_event_call flags
tracing: Skip selftests if tracing is disabled
tracing: Fix memory leak in __create_synth_event()
ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected
ring-buffer: Force before_stamp and write_stamp to be different on discard
tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig
tracing: Remove duplicate declaration from trace.h
ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed. The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
45d189c606 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Christoph:
"nvme fixes for 5.12:
- more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan)
- fix a hwmon error return (Daniel Wagner)
- fix the keep alive timeout initialization (Martin George)
- ensure the model_number can't be changed on a used subsystem
(Max Gurtovoy)"
* tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme:
nvmet: model_number must be immutable once set
nvme-fabrics: fix kato initialization
nvme-hwmon: Return error code when registration fails
nvme-pci: add quirks for Lexar 256GB SSD
nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
We have this weird true/false return from parking, and then some of the
callers decide to look at that. It can lead to unbalanced parks and
sqd locking. Have the callers check the thread status once it's parked.
We know we have the lock at that point, so it's either valid or it's NULL.
Fix race with parking on thread exit. We need to be careful here with
ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit.
Rename sqd->completion to sqd->parked to reflect that this is the only
thing this completion event doesn.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.
Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.
Fixes: e941894eae ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case we have already established connection to nvmf target, it
shouldn't be allowed to change the model_number. E.g. if someone will
identify ctrl and get model_number of "my_model" later on will change
the model_numbel via configfs to "my_new_model" this will break the NVMe
specification for "Get Log Page – Persistent Event Log" that refers to
Model Number as: "This field contains the same value as reported in the
Model Number field of the Identify Controller data structure, bytes
63:24."
Although it doesn't mentioned explicitly that this field can't be
changed, we can assume it.
So allow setting this field only once: using configfs or in the first
identify ctrl operation.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently kato is initialized to NVME_DEFAULT_KATO for both
discovery & i/o controllers. This is a problem specifically
for non-persistent discovery controllers since it always ends
up with a non-zero kato value. Fix this by initializing kato
to zero instead, and ensuring various controllers are assigned
appropriate kato values as follows:
non-persistent controllers - kato set to zero
persistent controllers - kato set to NVMF_DEV_DISC_TMO
(or any positive int via nvme-cli)
i/o controllers - kato set to NVME_DEFAULT_KATO
(or any positive int via nvme-cli)
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
