The softlockup_panic sysctl is currently a binary option: panic
immediately or never panic on soft lockups.
Panicking on any soft lockup, regardless of duration, can be overly
aggressive for brief stalls that may be caused by legitimate operations.
Conversely, never panicking may allow severe system hangs to persist
undetected.
Extend softlockup_panic to accept an integer threshold, allowing the
kernel to panic only when the normalized lockup duration exceeds N
watchdog threshold periods. This provides finer-grained control to
distinguish between transient delays and persistent system failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic when duration >= 1 * threshold (20s default, original behavior)
- N > 1: Panic when duration >= N * threshold (e.g., 2 = 40s, 3 = 60s.)
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility while allowing systems to tolerate brief lockups
while still catching severe, persistent hangs.
[lirongqing@baidu.com: v2]
Link: https://lkml.kernel.org/r/20251218074300.4080-1-lirongqing@baidu.com
Link: https://lkml.kernel.org/r/20251216074521.2796-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/ce0acfe2-9c1a-42b7-8782-f1e7f34b8544@linux.intel.com
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1e ("drm/amd/display: Add an HPD filter for HDMI")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a681cd903)
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8)
This reverts commit 820b3d376e.
It’s better to validate VM TLB flushes in the flush‑TLB backend
rather than in the generic VM layer.
Reverting this patch depends on
commit fa7c231fc2b0 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
being present in the tree.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9163fe4d79)
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d8)
Cc: stable@vger.kernel.org
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229)
This reverts commit 22a36e660d once,
which was merged twice due to an incorrect backmerge resolution.
Fixes: ce0478b02e ("Merge tag 'v6.18-rc6' into drm-next")
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 38a0f4cf8c)
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de67)
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
When calling drm_gpuvm_bo_obtain_prealloc() and using immediate mode,
this may result in a call to ops->vm_bo_free(vm_bo) while holding the
GEMs gpuva mutex. This is a problem if ops->vm_bo_free(vm_bo) performs
any operations that are not safe in the fence signalling critical path,
and it turns out that Panthor (the only current user of the method)
calls drm_gem_shmem_unpin() which takes a resv lock internally.
This constitutes both a violation of signalling safety and lock
inversion. To fix this, we modify the method to internally take the GEMs
gpuva mutex so that the mutex can be unlocked before freeing the
preallocated vm_bo.
Note that this modification introduces a requirement that the driver
uses immediate mode to call drm_gpuvm_bo_obtain_prealloc() as it would
otherwise take the wrong lock.
Fixes: 63e919a316 ("panthor: use drm_gpuva_unlink_defer()")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-1-dbd014005a0b@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The write of cfgdone bits always done at .atomic_flush.
When userspace makes plane zpos changes of two crtc within one commit,
at the .atomic_begin stage, crtcN will never receive the "layer change
cfg done" event of crtcM because crtcM has not yet written "cfgdone".
So only wait when there is pending cfgdone bits to avoid long timeout.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250718064120.8811-2-andyshrk@163.com
According to the implementation of read_poll_timeout_atomic, if the
delay time is 0, it will only use a simple loop based on timeout_us to
decrement the count. Therefore, the final timeout time will differ
significantly from the set timeout time. So, here we set a specific
delay time to ensure that the calculation of the timeout duration
is accurate.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250718064120.8811-1-andyshrk@163.com
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
This was lost in the 6.19 merge so reapply it.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3925683515)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4)
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Apparently the DAC encoder needs to be set up before use.
The BIOS parser in DC did not support this so I assumed it was
not necessary, but the DAC doesn't work without it on some GPUs.
Fixes: 69b29b8946 ("drm/amd/display: Hook up DAC to bios_parser_encoder_control")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bb5dfe2f56)
Pass the correct enum values as expected by the VBIOS.
Previously the actual bit depth integer value was passed,
which was a mistake.
Fixes: 7fb4f254c8 ("drm/amd/display: Add SelectCRTC_Source to BIOS parser")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cdf6e4c0cd)
ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.
Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.
WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]
To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.
Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0288a345f1)
If when we backup the ring contents for reemit before a
ring reset, we skip jobs associated with the bad
context, however, we need to make sure the fences
are reemited as unprocessed submissions may depend on
them.
v2: clean up fence handling, make helpers static
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 155a748f14)
If we cancel a bad job and reemit the ring contents, and
we get another timeout, cancel everything rather than reemitting.
The wptr markers are only relevant for the original emit. If
we reemit, the wptr markers are no longer correct.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb62a2067c)
